[Debian]: X unter hamm
Hi,
seit ich ein update auf hamm vornahm laeuft mein X nicht mehr.
Allerdings hatte ich so meine Probleme beim update und musste
einiges loeschen bevor ich das System von Hand umstellen liess.
Das Grundsystem ist soweit noch bo.
Wenn ich startx eingebe sehe ich noch die Ausgabe des servers
vorbeiflitzen, fuer 2 sekunden sehe ich den grafikmodus .....
das wars.
Hat jemand eine idee wo ich suchen muss?
Die Ausgabe des servers haenge ich unten dran..
Vielen Dank ..
--
Norbert Blass
E-Mail: ba0423@bamberg.baynet.de
XFree86 Version 3.3 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: Jun 2 1997
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.0.21 i486 [ELF]
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
newmmio, mmio_928, s3_generic
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: model: "pc102"
(**) XKB: layout: "de"
(**) XKB: variant: "nodeadkeys"
(**) XKB: rules: "xfree86"
(**) XKB: keymap: "xfree86(de)" (overrides other XKB settings)
(**) Mouse: type: MouseMan, device: /dev/ttyS0, baudrate: 1200,
Chorded middle button
(**) S3: Graphics device ID: "My Video Card"
(**) S3: Monitor ID: "My Monitor"
(--) S3: Mode "640x480" needs hsync freq of 53.01 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 53.51 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 55.84 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 51.02 kHz. Deleted.
(--) S3: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted.
(--) S3: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) S3: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) S3: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(--) S3: PCI: Trio32/64 rev 54, Linear FB @ 0xe0000000
(--) S3: chipset: Trio64V+ rev. 54
(--) S3: chipset driver: newmmio
(--) S3: card type: PCI
(**) S3: videoram: 2048k
(--) S3: Ramdac type: s3_trio64
(--) S3: Ramdac speed: 135 MHz
(--) S3: Using Trio32/64 programmable clock (MCLK 57.989 MHz)
(--) S3: Maximum allowed dot-clock: 135.000 MHz
(**) S3: Mode "640x480": mode clock = 31.500
(**) S3: Mode "800x600": mode clock = 50.000
(**) S3: Mode "1024x768": mode clock = 65.000
(--) S3: There is no mode definition named "1280x1024"
(--) S3: Removing mode "1280x1024" from list of valid modes.
(--) S3: Using 6 bits per RGB value
(--) S3: Virtual resolution set to 1024x768
(--) S3: Local bus LAW is 0xE0000000
(--) S3: Using a banksize of 2048k, line width of 1024
(--) S3: Using a single 64x64 area at (960,769) for expanding pixmaps
(--) S3: Using 8 planes of 1024x1215 at (0,833) aligned 8 as font cache
waiting for X server to shut down
Reply to: