Re: dazed and confused: install issue on Blade 1000
Hi Dirk,
I didn't get any errors in the Xorg.0.log, but your suggestion worked,
so I now have X working. I haven't got the resolution I want, but I can
play with that.
Onto the next problem: noisy fans.......
Thanks for the help - *much* appreciated.
Chris
On 22/03/2010 15:04, Dirk Dettmann Mailinglisten wrote:
> Hi Chris,
>
> as fas as I know the PGX64 is identical to a ATI 3D Rage XL. I had the
> same difficulties you mentioned with my Blade 150 and the onboard
> graphic (yes, it's the same one). In my special case there was no modul
> "mach64" because of security reasons in the debian netinstall kernel. I
> found a "FATAL: Module mach64 not found." in /var/log/Xorg.0.log.
>
> I solved this by getting the sources form
>
> http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.33.tar.bz2
>
> building an new kernel with mach64 support an installing it on the blade
> 150. My xorg.conf is the following one:
>
> Section "ServerLayout"
> Identifier "X.org Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
> ModulePath "/usr/lib/xorg/modules"
> FontPath "/usr/share/fonts/X11/misc"
> FontPath "/usr/share/fonts/X11/cyrillic"
> FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
> FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
> FontPath "/usr/share/fonts/X11/Type1"
> FontPath "/usr/share/fonts/X11/100dpi"
> FontPath "/usr/share/fonts/X11/75dpi"
> FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
> FontPath "built-ins"
> EndSection
>
> Section "Module"
> Load "extmod"
> Load "dri2"
> Load "dbe"
> Load "record"
> Load "dri"
> Load "glx"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/input/mice"
> Option "ZAxisMapping" "4 5 6 7"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "Monitor Model"
> HorizSync 30-65
> VertRefresh 50-75
> Option "DPMS"
> EndSection
>
> Section "Device"
> ### Available Driver options are:-
> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> ### [arg]: arg optional
> #Option "probe_sparse" # [<bool>]
> #Option "accel" # [<bool>]
> #Option "crt_display" # [<bool>]
> #Option "composite_sync" # [<bool>]
> #Option "hw_cursor" # [<bool>]
> #Option "force_pci_mode" # [<bool>]
> #Option "dma_mode" # <str>
> #Option "agp_mode" # <i>
> #Option "agp_size" # <i>
> #Option "local_textures" # [<bool>]
> #Option "buffer_size" # <i>
> #Option "mmio_cache" # [<bool>]
> #Option "test_mmio_cache" # [<bool>]
> #Option "panel_display" # [<bool>]
> #Option "reference_clock" # <freq>
> #Option "shadow_fb" # [<bool>]
> #Option "sw_cursor" # [<bool>]
> #Option "AccelMethod" # <str>
> #Option "RenderAccel" # [<bool>]
> Identifier "Card0"
> Driver "mach64"
> VendorName "ATI Technologies Inc"
> BoardName "Rage XL"
> BusID "PCI:0:19:0"
> Option "reference_clock" "29.500 MHz"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> DefaultDepth 24
> SubSection "Display"
> Viewport 0 0
> Depth 24
> Modes "1280x1024" "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
>
> gdm is up and running. I just made the installation yesterday, but it
> seems running stable.
>
> Have a nice day
> Dirk
>
>
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.791 / Virus Database: 271.1.1/2762 - Release Date: 03/21/10 19:33:00
>
Reply to: