Re: Sun Blade 100 - boot issue
On Sat, Aug 22, 2009 at 11:41:41AM +0100, Nataraj M Basappa wrote:
> i am new to sparc hardware, just found this isse after setting up
> lenny using netboot install.
> default kernal options on the stock kernel fails (see attached txt -
> withoutdma.txt), if i add ide=nodma boots correctly. is this a known
> issue? (as i found on some ubuntu forums)
> let me know if more info is required. below is lspci output
>
> 00:0d.0 IDE interface: ALi Corporation M5229 IDE (rev c3)
> [ 60.391934] ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc3) at PCI slot 0000:00:0d.0
> [ 60.507252] ALI15X3: 100% native mode on irq 15
> [ 60.577648] ide0: BM-DMA at 0x1fe02000a20-0x1fe02000a27
> [ 60.661826] ide1: BM-DMA at 0x1fe02000a28-0x1fe02000a2f
> [ 61.636625] hda: WDC WD400BB-22FJA0, ATA DISK drive
> [ 62.172506] hdb: Pioneer DVD-ROM ATAPIModel DVD-116 0109, ATAPI CD/DVD-ROM drive
> [ 62.336668] hda: UDMA/66 mode selected
> [ 62.396554] hdb: UDMA/66 mode selected
> [ 63.024555] ide0 at 0x1fe02000a00-0x1fe02000a07,0x1fe02000a1a on irq 15
> [ 63.122430] ide1 at 0x1fe02000a10-0x1fe02000a17,0x1fe02000a0a on irq 15
> [ 63.441333] hda: max request size: 128KiB
> [ 63.540733] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63
> [ 63.645150] hda: cache flushes supported
> [ 63.707565] hda: hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8
> [ 63.806606] hdb: ATAPI 40X DVD-ROM drive, 256kB Cache
> [ 63.883799] Uniform CD-ROM driver Revision: 3.20
Please file a bug report against the kernel package that is in use there.
It's strange that nothing is shown as the reason for the kernel panic...
--
2. That which causes joy or happiness.
Reply to: