Sun Blade 100 - boot issue
hi,
i am new to sparc hardware, just found this isse after setting up
lenny using netboot install.
default kernal options on the stock kernel fails (see attached txt -
withoutdma.txt), if i add ide=nodma boots correctly. is this a known
issue? (as i found on some ubuntu forums)
let me know if more info is required. below is lspci output
00:03.0 Non-VGA unclassified device: ALi Corporation M7101 Power Management Cont
roller [PMU]
00:05.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge [Aladdin
IV/V/V+]
00:08.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controlle
r Audio Device (rev 01)
00:0c.0 Bridge: Sun Microsystems Computer Corp. RIO EBUS (rev 01)
00:0c.1 Ethernet controller: Sun Microsystems Computer Corp. RIO 10/100 Ethernet
[eri] (rev 01)
00:0c.2 FireWire (IEEE 1394): Sun Microsystems Computer Corp. RIO 1394 (rev 01)
00:0c.3 USB Controller: Sun Microsystems Computer Corp. RIO USB (rev 01)
00:0d.0 IDE interface: ALi Corporation M5229 IDE (rev c3)
00:13.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 65)
01:02.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
01:02.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14)
cheers!
nataraj
Sun Blade 100 (UltraSPARC-IIe), No Keyboard
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.17.1, 1792 MB memory installed, Serial #50636767.
Ethernet address 0:3:ba:4:a7:df, Host ID: 8304a7df.
Boot device: disk File and args:
SILO Version 1.4.13
boot:
Allocated 8 Megs of memory at 0x40000000 for kernel
Uncompressing image...
Loaded kernel version 2.6.26
Loading initial ramdisk (6314719 bytes at 0x6F800000 phys, 0x40C00000 virt)...
-
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.17.1 2005/04/11 14:31'
[ 0.000000] PROMLIB: Root node compatible:
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-sparc64 (Debian 2.6.26-17lenny2) (dannf@de
bian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Sat Aug
15 22:45:07 UTC 2009
[ 0.000000] console [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[ 0.000000] Ethernet address: 00:03:ba:04:a7:df
[ 0.000000] Kernel: Using 1 locked TLB entries for main kernel image.
[ 0.000000] Remapping the kernel... done.
[ 0.000000] OF stdout device is: /pci@1f,0/isa@7/serial@0,3f8
[ 0.000000] PROM: Built device tree with 60468 bytes of memory.
[ 0.000000] Top of RAM: 0x6ff0c000, Total RAM: 0x6fef6000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] [0000000200000000-fffff80000400000] page_structs=131072 node=0 en
try=0/0
[ 0.000000] [0000000200000000-fffff80000800000] page_structs=131072 node=0 en
try=1/0
[ 0.000000] [0000000200700000-fffff80000c00000] page_structs=131072 node=0 en
try=2/0
[ 0.000000] [0000000200700000-fffff80001000000] page_structs=131072 node=0 en
try=3/0
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0 -> 229254
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 227327
[ 0.000000] 0: 227328 -> 229240
[ 0.000000] 0: 229250 -> 229254
[ 0.000000] Booting Linux...
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 227675
[ 0.000000] Kernel command line: root=/dev/hda2 ro
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] clocksource: mult[b40001] shift[16]
[ 0.000000] clockevent: mult[16c16bf] shift[32]
[ 45.811263] Console: colour dummy device 80x25
[ 45.869648] console handover: boot [earlyprom0] -> real [tty0]
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.17.1 2005/04/11 14:31'
[ 0.000000] PROMLIB: Root node compatible:
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-sparc64 (Debian 2.6.26-17lenny2) (dannf@de
bian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Sat Aug
15 22:45:07 UTC 2009
[ 0.000000] console [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[ 0.000000] Ethernet address: 00:03:ba:04:a7:df
[ 0.000000] Kernel: Using 1 locked TLB entries for main kernel image.
[ 0.000000] Remapping the kernel... done.
[ 0.000000] OF stdout device is: /pci@1f,0/isa@7/serial@0,3f8
[ 0.000000] PROM: Built device tree with 60468 bytes of memory.
[ 0.000000] Top of RAM: 0x6ff0c000, Total RAM: 0x6fef6000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] [0000000200000000-fffff80000400000] page_structs=131072 node=0 en
try=0/0
[ 0.000000] [0000000200000000-fffff80000800000] page_structs=131072 node=0 en
try=1/0
[ 0.000000] [0000000200700000-fffff80000c00000] page_structs=131072 node=0 en
try=2/0
[ 0.000000] [0000000200700000-fffff80001000000] page_structs=131072 node=0 en
try=3/0
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0 -> 229254
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 227327
[ 0.000000] 0: 227328 -> 229240
[ 0.000000] 0: 229250 -> 229254
[ 0.000000] Booting Linux...
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 227675
[ 0.000000] Kernel command line: root=/dev/hda2 ro
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] clocksource: mult[b40001] shift[16]
[ 0.000000] clockevent: mult[16c16bf] shift[32]
[ 45.811263] Console: colour dummy device 80x25
[ 45.869648] console handover: boot [earlyprom0] -> real [tty0]
[ 45.959098] Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes)
[ 45.978508] Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes)
[ 46.109393] Memory: 1803200k available (2592k kernel code, 944k data, 176k in
it) [fffff80000000000,000000006ff0c000]
[ 46.188125] Calibrating delay using timer specific routine.. 11.10 BogoMIPS (
lpj=22210)
[ 46.188401] Security Framework initialized
[ 46.188461] SELinux: Disabled at boot.
[ 46.188499] Capability LSM initialized
[ 46.188576] Mount-cache hash table entries: 512
[ 46.189602] Initializing cgroup subsys ns
[ 46.189648] Initializing cgroup subsys cpuacct
[ 46.189672] Initializing cgroup subsys devices
[ 46.191213] net_namespace: 1208 bytes
[ 46.192166] NET: Registered protocol family 16
[ 46.210467] PCI: Probing for controllers.
[ 46.213815] /pci@1f,0: SABRE PCI Bus Module
[ 46.213892] /pci@1f,0: PCI IO[1fe02000000] MEM[1ff00000000]
[ 46.213993] PCI: Scanning PBM /pci@1f,0
[ 46.214919] pci 0000:00:03.0: quirk: region 0800-083f claimed by ali7101 ACPI
[ 46.214961] pci 0000:00:03.0: quirk: region 0600-061f claimed by ali7101 SMB
[ 46.219447] ebus0: [flashprom] [eeprom] [idprom]
[ 46.220712] power: Control reg at 1fe02000800
[ 46.228244] usbcore: registered new interface driver usbfs
[ 46.228779] usbcore: registered new interface driver hub
[ 46.229176] usbcore: registered new device driver usb
[ 46.240996] /pci@1f,0/ebus@c/eeprom@1,0: Clock regs at 000001fff1000000
[ 46.243961] NET: Registered protocol family 2
[ 46.276597] IP route cache hash table entries: 65536 (order: 6, 524288 bytes)
[ 46.280937] TCP established hash table entries: 262144 (order: 9, 4194304 byt
es)
[ 46.306876] TCP bind hash table entries: 65536 (order: 6, 524288 bytes)
[ 46.310215] TCP: Hash tables configured (established 262144 bind 65536)
[ 46.310307] TCP reno registered
[ 46.320770] NET: Registered protocol family 1
[ 46.321380] checking if image is initramfs... it is
[ 48.727202] Freeing initrd memory: 6166k freed
[ 48.728260] Mini RTC Driver
[ 48.730195] audit: initializing netlink socket (disabled)
[ 48.730308] type=2000 audit(1250935417.976:1): initialized
[ 48.731038] Total HugeTLB memory allocated, 0
[ 48.731605] VFS: Disk quotas dquot_6.5.1
[ 48.731818] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
[ 48.732133] msgmni has been set to 3535
[ 48.732986] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
53)
[ 48.733069] io scheduler noop registered
[ 48.733109] io scheduler anticipatory registered
[ 48.733150] io scheduler deadline registered
[ 48.733240] io scheduler cfq registered (default)
[ 48.733312] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 48.734260] atyfb: 3D RAGE XL (Mach64 GR, PCI-33) [0x4752 rev 0x65]
[ 48.735173] atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 83 Mhz MC
LK, 63 MHz XCLK
[ 48.809283] Console: switching to colour frame buffer device 144x56
[ 48.836301] atyfb: fb0: ATY Mach64 frame buffer device on PCI
[ 48.854795] [drm] Initialized drm 1.1.0 20060810
[ 48.855777] f007d64c: ttyS0 at MMIO 0x1fe020003f8 (irq = 9) is a 16550A
[ 48.856094] Console: ttyS0 (SU)
[ 48.856252] console [ttyS0] enabled
[ 55.497606] f007f1a4: ttyS1 at MMIO 0x1fe020002e8 (irq = 9) is a 16550A
[ 55.603738] brd: module loaded
[ 55.657444] loop: module loaded
[ 55.708181] Uniform Multi-Platform E-IDE driver
[ 55.776743] ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
[ 55.893760] mice: PS/2 mouse device common for all mice
[ 55.974217] usbcore: registered new interface driver usbhid
[ 56.057044] usbhid: v2.6:USB HID core driver
[ 56.125139] TCP cubic registered
[ 56.177523] NET: Registered protocol family 17
[ 56.246473] registered taskstats version 1
[ 56.310488] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Loading, please wait...
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... [ 58.449503] sungem.c:v0.98 8/24/03
David S. Miller (davem@redhat.com)
[ 58.546921] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:04:a7:df
[ 58.648693] eth0: Found Generic MII PHY
[ 58.776336] ohci_hcd 0000:00:0c.3: OHCI Host Controller
[ 58.855843] ohci_hcd 0000:00:0c.3: new USB bus registered, assigned bus numbe
r 1
[ 58.963149] ohci_hcd 0000:00:0c.3: irq 13, io mem 0x1ff02000000
[ 59.213169] SCSI subsystem initialized
[ 59.317758] usb usb1: configuration #1 chosen from 1 choice
[ 59.401579] hub 1-0:1.0: USB hub found
[ 59.461283] hub 1-0:1.0: 4 ports detected
[ 59.628082] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 59.727477] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 59.832818] usb usb1: Product: OHCI Host Controller
[ 59.906727] usb usb1: Manufacturer: Linux 2.6.26-2-sparc64 ohci_hcd
[ 59.999178] usb usb1: SerialNumber: 0000:00:0c.3
[ 60.121024] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[12] MMIO=[1ff00420
000-1ff004207ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 60.307856] sym0: <875> rev 0x14 at pci 0000:01:02.0 irq 16
[ 60.391934] ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc3) at PCI slot 000
0:00:0d.0
[ 60.507252] ALI15X3: 100% native mode on irq 15
[ 60.577648] ide0: BM-DMA at 0x1fe02000a20-0x1fe02000a27
[ 60.661826] ide1: BM-DMA at 0x1fe02000a28-0x1fe02000a2f
[ 60.845534] sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
[ 60.939320] sym0: SCSI BUS has been reset.
[ 61.003721] scsi0 : sym-2.2.3
[ 61.053217] eth0: Link is up at 100 Mbps, full-duplex.
[ 61.140564] sym1: <875> rev 0x14 at pci 0000:01:02.1 irq 17
[ 61.315912] sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
[ 61.409601] sym1: SCSI BUS has been reset.
[ 61.473918] scsi1 : sym-2.2.3
[ 61.636625] hda: WDC WD400BB-22FJA0, ATA DISK drive
[ 62.172506] hdb: Pioneer DVD-ROM ATAPIModel DVD-116 0109, ATAPI CD/DVD-ROM dr
ive
[ 62.336668] hda: UDMA/66 mode selected
[ 62.396554] hdb: UDMA/66 mode selected
[ 63.024555] ide0 at 0x1fe02000a00-0x1fe02000a07,0x1fe02000a1a on irq 15
[ 63.122430] ide1 at 0x1fe02000a10-0x1fe02000a17,0x1fe02000a0a on irq 15
[ 63.441333] hda: max request size: 128KiB
[ 63.540733] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63
[ 63.645150] hda: cache flushes supported
[ 63.707565] hda: hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8
[ 63.806606] hdb: ATAPI 40X DVD-ROM drive, 256kB Cache
[ 63.883799] Uniform CD-ROM driver Revision: 3.20
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
[ 64.587477] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 64.681774] EXT3-fs: write access will be enabled during recovery.
[ 64.792758] kjournald starting. Commit interval 5 seconds
[ 64.875516] EXT3-fs: recovery complete.
[ 64.936990] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
[ 65.336480] Kernel panic - not syncing: Attempted to kill init!
[ 65.424879] Press Stop-A (L1-A) to return to the boot prom
Sun Blade 100 (UltraSPARC-IIe), No Keyboard
Copyright 2005 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.17.1, 1792 MB memory installed, Serial #50636767.
Ethernet address 0:3:ba:4:a7:df, Host ID: 8304a7df.
Boot device: disk File and args:
SILO Version 1.4.13
boot: Linux ide=nodma
Allocated 8 Megs of memory at 0x40000000 for kernel
Uncompressing image...
Loaded kernel version 2.6.26
Loading initial ramdisk (6314719 bytes at 0x6F800000 phys, 0x40C00000 virt)...
-
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.17.1 2005/04/11 14:31'
[ 0.000000] PROMLIB: Root node compatible:
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-sparc64 (Debian 2.6.26-17lenny2) (dannf@de
bian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Sat Aug
15 22:45:07 UTC 2009
[ 0.000000] console [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[ 0.000000] Ethernet address: 00:03:ba:04:a7:df
[ 0.000000] Kernel: Using 1 locked TLB entries for main kernel image.
[ 0.000000] Remapping the kernel... done.
[ 0.000000] OF stdout device is: /pci@1f,0/isa@7/serial@0,3f8
[ 0.000000] PROM: Built device tree with 60468 bytes of memory.
[ 0.000000] Top of RAM: 0x6ff0c000, Total RAM: 0x6fef6000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] [0000000200000000-fffff80000400000] page_structs=131072 node=0 en
try=0/0
[ 0.000000] [0000000200000000-fffff80000800000] page_structs=131072 node=0 en
try=1/0
[ 0.000000] [0000000200700000-fffff80000c00000] page_structs=131072 node=0 en
try=2/0
[ 0.000000] [0000000200700000-fffff80001000000] page_structs=131072 node=0 en
try=3/0
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0 -> 229254
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 227327
[ 0.000000] 0: 227328 -> 229240
[ 0.000000] 0: 229250 -> 229254
[ 0.000000] Booting Linux...
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 227675
[ 0.000000] Kernel command line: root=/dev/hda2 ro ide=nodma
[ 0.000000] ide_setup: ide=nodma : Prevented DMA
[ 0.000000] -- OBSOLETE OPTION, WILL BE REMOVED SOON!
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] clocksource: mult[b40001] shift[16]
[ 0.000000] clockevent: mult[16c16bf] shift[32]
[ 48.059800] Console: colour dummy device 80x25
[ 48.118186] console handover: boot [earlyprom0] -> real [tty0]
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 4.17.1 2005/04/11 14:31'
[ 0.000000] PROMLIB: Root node compatible:
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-sparc64 (Debian 2.6.26-17lenny2) (dannf@de
bian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Sat Aug
15 22:45:07 UTC 2009
[ 0.000000] console [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[ 0.000000] Ethernet address: 00:03:ba:04:a7:df
[ 0.000000] Kernel: Using 1 locked TLB entries for main kernel image.
[ 0.000000] Remapping the kernel... done.
[ 0.000000] OF stdout device is: /pci@1f,0/isa@7/serial@0,3f8
[ 0.000000] PROM: Built device tree with 60468 bytes of memory.
[ 0.000000] Top of RAM: 0x6ff0c000, Total RAM: 0x6fef6000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] [0000000200000000-fffff80000400000] page_structs=131072 node=0 en
try=0/0
[ 0.000000] [0000000200000000-fffff80000800000] page_structs=131072 node=0 en
try=1/0
[ 0.000000] [0000000200700000-fffff80000c00000] page_structs=131072 node=0 en
try=2/0
[ 0.000000] [0000000200700000-fffff80001000000] page_structs=131072 node=0 en
try=3/0
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0 -> 229254
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0 -> 227327
[ 0.000000] 0: 227328 -> 229240
[ 0.000000] 0: 229250 -> 229254
[ 0.000000] Booting Linux...
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 227675
[ 0.000000] Kernel command line: root=/dev/hda2 ro ide=nodma
[ 0.000000] ide_setup: ide=nodma : Prevented DMA
[ 0.000000] -- OBSOLETE OPTION, WILL BE REMOVED SOON!
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] clocksource: mult[b40001] shift[16]
[ 0.000000] clockevent: mult[16c16bf] shift[32]
[ 48.059800] Console: colour dummy device 80x25
[ 48.118186] console handover: boot [earlyprom0] -> real [tty0]
[ 48.207619] Dentry cache hash table entries: 262144 (order: 8, 2097152 bytes)
[ 48.227034] Inode-cache hash table entries: 131072 (order: 7, 1048576 bytes)
[ 48.354655] Memory: 1803200k available (2592k kernel code, 944k data, 176k in
it) [fffff80000000000,000000006ff0c000]
[ 48.432663] Calibrating delay using timer specific routine.. 11.10 BogoMIPS (
lpj=22210)
[ 48.432935] Security Framework initialized
[ 48.432996] SELinux: Disabled at boot.
[ 48.433034] Capability LSM initialized
[ 48.433110] Mount-cache hash table entries: 512
[ 48.434140] Initializing cgroup subsys ns
[ 48.434184] Initializing cgroup subsys cpuacct
[ 48.434208] Initializing cgroup subsys devices
[ 48.435744] net_namespace: 1208 bytes
[ 48.436639] NET: Registered protocol family 16
[ 48.454970] PCI: Probing for controllers.
[ 48.458319] /pci@1f,0: SABRE PCI Bus Module
[ 48.458394] /pci@1f,0: PCI IO[1fe02000000] MEM[1ff00000000]
[ 48.458495] PCI: Scanning PBM /pci@1f,0
[ 48.459423] pci 0000:00:03.0: quirk: region 0800-083f claimed by ali7101 ACPI
[ 48.459461] pci 0000:00:03.0: quirk: region 0600-061f claimed by ali7101 SMB
[ 48.463991] ebus0: [flashprom] [eeprom] [idprom]
[ 48.465228] power: Control reg at 1fe02000800
[ 48.472713] usbcore: registered new interface driver usbfs
[ 48.473250] usbcore: registered new interface driver hub
[ 48.473651] usbcore: registered new device driver usb
[ 48.485525] /pci@1f,0/ebus@c/eeprom@1,0: Clock regs at 000001fff1000000
[ 48.488513] NET: Registered protocol family 2
[ 48.521126] IP route cache hash table entries: 65536 (order: 6, 524288 bytes)
[ 48.525493] TCP established hash table entries: 262144 (order: 9, 4194304 byt
es)
[ 48.551434] TCP bind hash table entries: 65536 (order: 6, 524288 bytes)
[ 48.554785] TCP: Hash tables configured (established 262144 bind 65536)
[ 48.554873] TCP reno registered
[ 48.565296] NET: Registered protocol family 1
[ 48.565910] checking if image is initramfs... it is
[ 50.969258] Freeing initrd memory: 6166k freed
[ 50.970331] Mini RTC Driver
[ 50.972222] audit: initializing netlink socket (disabled)
[ 50.972336] type=2000 audit(1250935656.968:1): initialized
[ 50.973130] Total HugeTLB memory allocated, 0
[ 50.973701] VFS: Disk quotas dquot_6.5.1
[ 50.973918] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
[ 50.974239] msgmni has been set to 3535
[ 50.975033] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
53)
[ 50.975121] io scheduler noop registered
[ 50.975162] io scheduler anticipatory registered
[ 50.975204] io scheduler deadline registered
[ 50.975291] io scheduler cfq registered (default)
[ 50.975362] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 50.976305] atyfb: 3D RAGE XL (Mach64 GR, PCI-33) [0x4752 rev 0x65]
[ 50.977279] atyfb: 8M SDRAM (1:1), 29.498928 MHz XTAL, 230 MHz PLL, 83 Mhz MC
LK, 63 MHz XCLK
[ 51.051010] Console: switching to colour frame buffer device 144x56
[ 51.077910] atyfb: fb0: ATY Mach64 frame buffer device on PCI
[ 51.096273] [drm] Initialized drm 1.1.0 20060810
[ 51.097321] f007d64c: ttyS0 at MMIO 0x1fe020003f8 (irq = 9) is a 16550A
[ 51.097625] Console: ttyS0 (SU)
[ 51.097790] console [ttyS0] enabled
[ 57.890206] f007f1a4: ttyS1 at MMIO 0x1fe020002e8 (irq = 9) is a 16550A
[ 57.996437] brd: module loaded
[ 58.050114] loop: module loaded
[ 58.100665] Uniform Multi-Platform E-IDE driver
[ 58.169209] ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
[ 58.286430] mice: PS/2 mouse device common for all mice
[ 58.366466] usbcore: registered new interface driver usbhid
[ 58.449770] usbhid: v2.6:USB HID core driver
[ 58.517916] TCP cubic registered
[ 58.570164] NET: Registered protocol family 17
[ 58.639346] registered taskstats version 1
[ 58.703351] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Loading, please wait...
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... [ 60.851560] sungem.c:v0.98 8/24/03
David S. Miller (davem@redhat.com)
[ 60.948548] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:04:a7:df
[ 61.050068] eth0: Found Generic MII PHY
[ 61.171004] ohci_hcd 0000:00:0c.3: OHCI Host Controller
[ 61.250801] ohci_hcd 0000:00:0c.3: new USB bus registered, assigned bus numbe
r 1
[ 61.358250] ohci_hcd 0000:00:0c.3: irq 13, io mem 0x1ff02000000
[ 61.609736] SCSI subsystem initialized
[ 61.715923] usb usb1: configuration #1 chosen from 1 choice
[ 61.800089] hub 1-0:1.0: USB hub found
[ 61.859534] hub 1-0:1.0: 4 ports detected
[ 62.025881] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 62.125515] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 62.230541] usb usb1: Product: OHCI Host Controller
[ 62.304505] usb usb1: Manufacturer: Linux 2.6.26-2-sparc64 ohci_hcd
[ 62.396951] usb usb1: SerialNumber: 0000:00:0c.3
[ 62.520056] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[12] MMIO=[1ff00420
000-1ff004207ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 62.706477] sym0: <875> rev 0x14 at pci 0000:01:02.0 irq 16
[ 62.790850] ALI15X3: IDE controller (0x10b9:0x5229 rev 0xc3) at PCI slot 000
0:00:0d.0
[ 62.906132] ALI15X3: 100% native mode on irq 15
[ 62.976499] ide0: BM-DMA at 0x1fe02000a20-0x1fe02000a27
[ 63.060893] ide1: BM-DMA at 0x1fe02000a28-0x1fe02000a2f
[ 63.244840] sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
[ 63.339019] sym0: SCSI BUS has been reset.
[ 63.403713] scsi0 : sym-2.2.3
[ 63.453404] eth0: Link is up at 100 Mbps, full-duplex.
[ 63.541213] sym1: <875> rev 0x14 at pci 0000:01:02.1 irq 17
[ 63.715753] sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
[ 63.809837] sym1: SCSI BUS has been reset.
[ 63.874396] scsi1 : sym-2.2.3
[ 64.037154] hda: WDC WD400BB-22FJA0, ATA DISK drive
[ 64.573032] hdb: Pioneer DVD-ROM ATAPIModel DVD-116 0109, ATAPI CD/DVD-ROM dr
ive
[ 65.305073] ide0 at 0x1fe02000a00-0x1fe02000a07,0x1fe02000a1a on irq 15
[ 65.403029] ide1 at 0x1fe02000a10-0x1fe02000a17,0x1fe02000a0a on irq 15
[ 65.719360] hda: max request size: 128KiB
[ 65.821262] hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63
[ 65.926243] hda: cache flushes supported
[ 65.988676] hda: hda1 hda2 hda3 hda4 hda5 hda6 hda7 hda8
[ 66.092376] hdb: ATAPI 40X DVD-ROM drive, 256kB Cache
[ 66.169815] Uniform CD-ROM driver Revision: 3.20
done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
[ 66.931540] kjournald starting. Commit interval 5 seconds
[ 67.014388] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd[ 69.861925] udevd version 125 st
arted
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...done.
Setting the system clock.
Activating swap...[ 75.954320] Adding 3028232k swap on /dev/hda6. Priority:-1
extents:1 across:3028232k
done.
Checking root file system...fsck 1.41.3 (12-Oct-2008)
/dev/hda2: clean[ 76.522443] EXT3 FS on hda2, , 2940/68544 filinternal journal
es, 82548/273104 blocks
done.
Setting the system clock.
Cleaning up ifupdown....
Loading kernel modules...done.
Checking file systems...fsck 1.41.3 (12-Oct-2008)
/dev/hda1 was not cleanly unmounted, check forced.
/dev/hda1: 29/48192 files (3.4% non-contiguous), 15273/96390 blocks
/dev/hda8: recovering journal
/dev/hda8: clean, 15/1716960 files, 151816/6867786 blocks
/dev/hda7: recovering journal
/dev/hda7: Clearing orphaned inode 12 (uid=0, gid=0, mode=0100600, size=0)
/dev/hda7: clean, 13/98784 files, 22761/393592 blocks
/dev/hda4: recovering journal
/dev/hda4: clean, 21358/305824 files, 150507/1220940 blocks
/dev/hda5: recovering journal
/dev/hda5: clean, 1878/183264 files, 92146/732964 blocks
fsck died with exit status 1
done.
Setting kernel variables (/etc/sysctl.conf)...done.
Mounting local filesystems...[ 84.535150] kjournald starting. Commit interval
5 seconds
[ 84.619562] EXT3 FS on hda8, internal journal
[ 84.687340] EXT3-fs: mounted filesystem with ordered data mode.
[ 84.812502] kjournald starting. Commit interval 5 seconds
[ 84.896099] EXT3 FS on hda7, internal journal
[ 84.963915] EXT3-fs: mounted filesystem with ordered data mode.
[ 85.095888] kjournald starting. Commit interval 5 seconds
[ 85.180037] EXT3 FS on hda4, internal journal
[ 85.247802] EXT3-fs: mounted filesystem with ordered data mode.
[ 85.372762] kjournald starting. Commit interval 5 seconds
[ 85.456770] EXT3 FS on hda5, internal journal
[ 85.524523] EXT3-fs: mounted filesystem with ordered data mode.
done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...done.
Starting portmap daemon....
[ 87.351254] eth0: Link is up at 100 Mbps, full-duplex.
[ 87.429262] eth0: Pause is disabled
Starting NFS common utilities: statd.
INIT: Entering runlevel: 2
Starting enhanced syslogd: rsyslogd.
Starting MTA: exim4.
Starting NFS common utilities: statd.
[ 92.198724] RPC: Registered udp transport module.
[ 92.270923] RPC: Registered tcp transport module.
[ 92.621873] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Exporting directories for NFS kernel daemon....
Starting NFS kernel daemon: nfsd[ 93.007457] NFSD: Using /var/lib/nfs/v4recove
ry as the NFSv4 state recovery directory
[ 93.135144] NFSD: starting 90-second grace period
mountd.
Starting internet superserver: inetd.
Starting Samba daemons: nmbd smbd[ 95.808965] NET: Registered protocol family
10
[ 95.880706] lo: Disabled Privacy Extensions
.
Not starting S.M.A.R.T. daemon smartd, disabled via /etc/default/smartmontools (
warning).
Starting the Winbind daemon: winbind.
Starting Netatalk services (this will take a while): [ 97.788171] NET: Registe
red protocol family 5
atalkd afpd papd.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: crond.
Starting web server: apache2.
Debian GNU/Linux 5.0 krishna ttyS0
krishna login:
Reply to: