Re: Kernel panic - not syncing: Aiee, killing interrupt handler!
foo_bar_baz_boo-deb@yahoo.com wrote:
> I've had issues with the ESP controller in 2.6.xx before but do not
> have access to the box on which it occurred in order to do anything
> about the problem.
>
> Might want to put the output of uname -a, prtconf -v (must be root),
> and dmesg. From 2.4 since 2.6 OOPSes.
>
> Also tell us about your disks if the dmesg output gives an incomplete
> picture of their setup.
>
> HTH!
# uname -a
Linux xxx 2.4.24-sparc32 #1 Fri Jan 30 16:04:55 EST 2004 sparc GNU/Linux
# prtconf -v
System Configuration: Sun Microsystems sun4m
Memory size: 128 Megabytes
System Peripherals (Software Nodes):
SUNW,SPARCstation-10
packages (driver probably installed)
disk-label (driver probably installed)
deblocker (driver probably installed)
obp-tftp (driver probably installed)
options (driver probably installed)
aliases (driver probably installed)
openprom (driver probably installed)
iommu (driver probably installed)
sbus (driver probably installed)
espdma (driver probably installed)
esp (driver probably installed)
sd (driver probably installed)
st (driver probably installed)
ledma (driver probably installed)
le (driver probably installed)
SUNW,bpp (driver probably installed)
SUNW,DBRIe (driver probably installed)
mmcodec (driver probably installed)
obio (driver probably installed)
zs (driver probably installed)
zs (driver probably installed)
eeprom (driver probably installed)
counter (driver probably installed)
interrupt (driver probably installed)
SUNW,fdtwo (driver probably installed)
auxio (driver probably installed)
power (driver probably installed)
memory (driver probably installed)
virtual-memory (driver probably installed)
eccmemctl (driver probably installed)
Ross,RT625 (driver probably installed)
Ross,RT625 (driver probably installed)
# dmesg
PROMLIB: Sun Boot Prom Version 3 Revision 2
Linux version 2.4.24-sparc32 (root@zachery) (gcc version 3.3.3 20040125
(prerel4
ARCH: SUN4M
TYPE: Sun4m SparcStation10/20
Ethernet address: 0:c0:78:50:0:b6
SRMMU: Using VAC size of 262144 bytes, line size 64 bytes.
Boot time fixup v1.6. 4/Mar/98 Jakub Jelinek (jj@ultra.linux.cz). Patching
kernu
16265MB HIGHMEM available.
On node 0 totalpages: 32014
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 65418 pages.
Found CPU 0 <node=ffd74140,mid=8>
Found CPU 1 <node=ffd74390,mid=9>
Found 2 CPU prom device tree node(s).
Power off control detected.
Kernel command line: root=/dev/sda3 ro
Calibrating delay loop... 89.90 BogoMIPS
Memory: 122060k available (1824k kernel code, 300k data, 132k init, 65060k
high]
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
IOMMU: impl 0 vers 3 page table at f0880000 of size 262144 bytes
sbus0: Clock 20.0 MHz
dma0: Revision 2
dma1: Revision 2
Sparc Zilog8530 serial driver version 1.68.2.2
Sun Mouse-Systems mouse driver version 1.00
tty00 at 0xffede004 (irq = 44) is a Zilog8530
tty01 at 0xffede000 (irq = 44) is a Zilog8530
tty02 at 0xffedb004 (irq = 44) is a Zilog8530
tty03 at 0xffedb000 (irq = 44) is a Zilog8530
keyboard: not present
Console: ttyS0 (Zilog8530)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Floppy drive(s): fd0 is 1.44M
ioremap: done with statics, switching to malloc
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
sunlance.c:v2.01 08/Nov/01 Miguel de Icaza (miguel@nuclecu.unam.mx)
eth0: LANCE 00:c0:78:50:00:b6
eth0: using auto-carrier-detection.
SCSI subsystem driver Revision: 1.00
esp0: IRQ 36 SCSI ID 7 Clk 40MHz CCYC=25000 CCF=8 TOut 167
NCR53C9XF(espfast)
ESP: Total of 1 ESP hosts found, 1 actually in use.
scsi0 : Sparc ESP100A-FAST
Vendor: IBM Model: DNES-318350 Rev: SA30
Type: Direct-Access ANSI SCSI revision: 03
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
esp0: target 0 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
Partition check:
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 132k freed
uname[10]: Unimplemented SPARC system call 188
readlink[12]: Unimplemented SPARC system call 188
S02mountvirtfs[11]: Unimplemented SPARC system call 188
touch[13]: Unimplemented SPARC system call 188
mountpoint[14]: Unimplemented SPARC system call 188
mount[15]: Unimplemented SPARC system call 188
Adding Swap: 523192k swap-space (priority -1)
eth0: Carrier Lost, trying TPE
The dmesg output for 2.4 is match to what is in the system.
--
Bob Tanner <tanner@real-time.com> | Phone : (952)943-8700
http://www.real-time.com, Minnesota, Linux | Fax : (952)943-8500
Key fingerprint = AB15 0BDF BCDE 4369 5B42 1973 7CF1 A709 2CC1 B288
Reply to: