[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: SunBlade 2000 fails to netboot



In article <20040716205951.GD7440@azrael.luon.net> admar@luon.net writes:
>I don't know if it's the same issue, but I get the same kind of error
>on my blade 100 when I reboot the machine:
>
>* if I do a cold boot into Debian, it boots fine
>* if it's running solaris, and I do a reboot and I select linux, I get a
>  '... MMU Miss' (sorry, don't remember what's on the dots) and I get
>  the ok prompt

You may want to try "reset" at the ok prompt and see if you can boot
linux then.  (halt at the silo prompt will drop you to openboot.)

On some sun hardware, "probe-scsi-all" will hang or fail if the scsi
controler has already been initialized.  The linux boot sequence could
have the same type of issue.

-- 
Blars Blarson			blarson@blars.org
				http://www.blars.org/blars.html
With Microsoft, failure is not an option.  It is a standard feature.



Reply to: