[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: ipv6 on sparc / 6in4



Hello,

> None of the tunneling works on sparc/sparc64. The ioctls are not
> implemented at all. I looked into fixing this a while back and decided
> it was low priority.

I not sure, but maybe this is fixed in 2.4.19-rc3. With 2.4.17, I have
try to use VTUN without success. Since some days now, I have installed
2.4.19-rc3 and VTUN is OK :

# uname -a
Linux cool 2.4.19-rc3 #4 Fri Jul 26 21:19:13 CEST 2002 sparc64 unknown
unknown GNU/Linux
# /sbin/ifconfig -a tun0
tun0      Link encap:Point-to-Point Protocol  
          inet addr:10.250.2.2  P-t-P:10.250.2.1  Mask:255.255.255.255
	  UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500 Metric:1
          RX packets:2 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:10 
          RX bytes:168 (168.0 b) TX bytes:168 (168.0 b)

So, maybe try the 2.4.19-rc3.

Good luck.

		Olivier
-- 
Olivier Bornet                 |      français : http://puck.ch/f
Swiss Ice Hockey Results       |      english  : http://puck.ch/e
http://puck.ch/                |      deutsch  : http://puck.ch/g
Olivier.Bornet@puck.ch         |      italiano : http://puck.ch/i
Get my PGP-key at http://puck.ch/pgp or at http://wwwkeys.pgp.net

Attachment: pgpcIf3Eeq4J6.pgp
Description: PGP signature


Reply to: