Re: Installing debian on a SunBlade 100
Hello David,
> Olivier Bornet writes:
> > > > My current configuration is a SunBlade 100 and a Ultra 10, both connected to
> > > > the same screen, a Sun 18.1" LCD. The problem is also present with only the
> > > > Blade. The Ultra 10 has no problem with the display.
> > >
> > > This may be the difference, as I have no LCD to test with.
> >
> > Seem not. I have just try with a Sun 19" CRT display. Same problem. And maybe
> > a little more bad : in console mode, the screen don't display anything, and
> > the green LED near the power switch flash rapidly. I think this will say
> > "refresh rates not supported".
>
> I think I know what may fix it, can you compile your own 2.4.x
> kernels?
OK, now I'm ready to compile my own 2.4.x kernel. I have all the needed
stuff, and allready have compile a standard 2.4.5 which boot correctly
on the Ultra, but hang on the Blade (certainly a wrong choice for the
Video Card) when starting X.
Can you send to me which test I can make ? (and eventualy the .config you
use for generate the "standard" distributed kernel image).
Also, if I need to apply some patchs, just let me know.
Thanks in advance.
Olivier
--
Olivier Bornet | français : http://puck.ch/f
Swiss Ice Hockey Results | english : http://puck.ch/e
http://puck.ch/ | deutsch : http://puck.ch/g
Olivier.Bornet@puck.ch | italiano : http://puck.ch/i
Get my PGP-key at http://puck.ch/pgp or at http://wwwkeys.pgp.net
Reply to: