Re: eth0 and kernel 2.6.7
thanx, that was it !
firstname.lastname@example.org schrieb am 13.09.04 11:22:11:
> Christina Boeckler writes:
> > i am running sarge on an g3 newworld powerbook
> Which model? There are two NewWorld PowerBooks with G3 processors,
> the Lombard and the Pismo. You can easily recognise them, the Lombard
> has a SCSI port at the rear while the Pismo has two Firewire ports.
> > and with a standard debian 2.4.26-powerpc-pmac kernel almost
> > everything is fine. but when i want to upgrade to a 2.6.7-powerpc
> > kernel, my network is not recognised anymore :
> > the same happens with the 2.4.26-powerpc-small-pmac kernel.
> > following the discussion on this list i installed discover1, but it
> > did not help ...
> From the symptoms, I would assume that you have a Lombard and need to
> load the bmac driver manually (the Pismo has a gmac ethernet card, and
> it's sungem driver is found nicely by discover). Try and run the
> command 'modprobe bmac' while running the 2.6.7 kernel, and if that
> works add a line containing just 'bmac' to the file /etc/modules.
> Regards, Jens.
> J'qbpbe, le m'en fquz pe j'qbpbe!
> Le veux aimeb et mqubib panz je pézqbpbe je djuz tqtaj!
Aufnehmen, abschicken, nah sein - So einfach ist
WEB.DE Video-Mail: http://freemail.web.de/?mc=021200