Re: Correct kernel .config for an iBook2 500/66 and 2.4.20-pre7-ben0
On Sat, 2002-09-28 at 10:25, Claas Langbehn wrote:
> ... but for some reasons I don't get the sound
> working. I have got the device files in /dev/sound/ and everything
> seems to work. But there comes no sound at all out of the speakers.
some lines from dmesg:
tas driver [TAS3001c driver V 0.3])
using i2c address: 0x34 from device-tree
i2c-core.o: driver TAS3001c driver V 0.3 registered.
Audio jack unplugged, enabling speakers.
AE-Init tumbler mixer
PowerMac Tumbler DMA sound driver rev 016 installed
Core driver edition 01.06 : PowerMac Built-in Sound driver edition 00.07
Write will use 4 fragments of 32768 bytes as default
Audio jack plugged, muting speakers.
Audio jack unplugged, enabling speakers.
Audio jack plugged, muting speakers.
Audio jack unplugged, enabling speakers.
$ ls /dev/sound/
audio dsp dspW mixer sequencer sequencer2 unknown6
I am trying to play on /dev/sound/dsp with xmms.
By the way, which Program uses the dspW device?
I have never used it.
/dev/sound$ cat unknown6
PowerMac Tumbler DMA sound driver rev 016 :
Core driver edition 01.06 : PowerMac Built-in Sound driver edition 00.07
HW rates: 44100 s/sec
HW AFMTS: signed 16 bit BE
=== Formats & settings ===
Parameter soft hard
Format : signed 16 bit BE signed 16 bit BE
Samp Rate: 44100 s/sec 44100 s/sec
Channels : stereo stereo
=== Sound Queue status ===
Allocated: Buffers Size
write: 4 32768
Current : MaxFrg FragSiz MaxAct Frnt Rear Cnt RrSize A B S L xruns
write: 4 4096 4 0 -1 0 0 0 0 0 0 8
Is it a kernel problem or am I doing something wrong?
.--
Claas
Reply to: