Re: netatalk does not see a printer
I have removed the network.opts file in /etc/pcmcia, and I send the "ifconfig eth0 up" before starting AppleTalk. It works!!!
I am not on a network, so my network.opts file was a standard one which I had not edited. I hope it is fine just removing it. I'll try learning something about it, so I can configure it properly.
Anyway now it works, so I am very happy, also because the Asante box was quite expensive.
Thank you very much for your advise
> I am able to print using netatalk trough an Asante bridge to my HP
> LaserJet. The following points might help you :
> - your ifconfig does not show that the Ethernet network is "UP", meaning
> that it's probably down :-)
> I suggest you perform an "ifconfig eth0 up" and see what happens.
> - my "getzones" command also times out, but that does not seem to have
> any impact on the printing ability. In particular, nbplkup works (so does
> printing) both before and after the getzones command.
> Let me know if you'd like more information.
> Good luck,
> Laurent Steffan
> eBusiness Technical Consultant
> Re?çu de Alessandro Ghigi le 18/07/02 ?à 23:24
> >I have a potato on a laptop with a pcmcia ethernet card, and I am trying
> >to connect it to an Apple LaserWriter 4/600 PS, which has a LocalTalk
> >connector. I also have an Asantetalk adapter which bridges (or should
> >bridge) between ethernet and localtalk.
> >I have a kernel with appletalk as a loadable module, and have installed
> >netatalk. When I start netatalk using the script (after loading
> >appletalk.o), it does not complain. Nevertheless the getzones command
> >does not work:
> >root:/etc/init.d# getzones
> >atp_rresp: Connection timed out
> >With nbplkup I get the following:
> >root:/etc/init.d# nbplkup
> > caspar:AFPServer
> >65280.226:128 caspar:netatalk
> > 65280.226:4
> > caspar:Workstation 65280.226:4
> >With ifconfig I get:
> >root:/home/ghigi# ifconfig eth0
> >eth0 Link encap:Ethernet HWaddr 00:50:04:DF:B4:BF
> > EtherTalk Phase 2 addr:65280/226
> > BROADCAST MULTICAST MTU:1500 Metric:1
> > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:100
> > Interrupt:11 Base address:0x200
To UNSUBSCRIBE, email to email@example.com
with a subject of "unsubscribe". Trouble? Contact firstname.lastname@example.org