Re: Re: I'm one step away from Airport
All I did was edit the /etc/network/interfaces
iface eth1 inet dhcp
You can have:
iface eth1 inet static
You probably want to remove (comment out) the line:
I don't know how to tell it the essid or whatnot for the iwconfig here...
you can always add that to the rc.d files.
Hope this helps
From: Orion Buckminster Montoya <email@example.com>
To: Blake Carlson <firstname.lastname@example.org>
Date: Tue, 16 Oct 2001 15:54:09 -0500
Subject: Re: I'm one step away from Airport
This worked! When I get it down to a system I'll post here what
exactly I did, for other cluebots like me.
xueexueg:/home/o# ifconfig eth1 10.0.1.0 netmask 255.255.255.0
xueexueg:/home/o# route add default gw 10.0.1.1 dev eth1
xueexueg:/home/o# iwconfig eth1 essid ARTFL
xueexueg:/home/o# iwconfig eth1 enc ten_digits_of_hex
Thanks a lot!
Orion Buckminster Montoya
The ARTFL Project
Blake Carlson wrote:
> % ifconfig eth1 192.168.0.10 netmask 255.255.255.0
> % route add default gw 192.168.0.1 dev eth1
> this adds the default route to your routing table and forwards through
> the gateway 192.168.0.1 for any address outside your subnet. Your
> routing table should now have two entries, one for the local net
> (192.168.0.0) and one for the default route (0.0.0.0).
> Give this a shot and let me know how it turns out. BTW - it will help
> if you start with a clean routing table so you should flush all of the
> entries before you do the above. If youu27re still having problems, be
> sure to send output from "ifconfig -l" and "route -n" so I can see
> what's going on.
To UNSUBSCRIBE, email to email@example.com
with a subject of "unsubscribe". Trouble? Contact firstname.lastname@example.org