Re: Loongson updates
Andreas Barth <aba@not.so.argh.org> writes:
Hi,
> * Arnaud Patard (arnaud.patard@rtp-net.org) [100503 23:57]:
>> Andreas Barth <aba@not.so.argh.org> writes:
>> > * Arnaud Patard (arnaud.patard@rtp-net.org) [100503 19:45]:
>> >> Andreas Barth <aba@not.so.argh.org> writes:
>> >> hmm... I've an idea of what the problem is but I need more information
>> >> to confirm my hypothesis. Do you know what's providing rtc on your
>> >> system ? If it's supposed to be driven by the rtc-cmos driver, can you
>> >> boot a kernel with RTC_DEBUG, load the rtc-cmos driver and look for
>> >> messages from the rtc kernel stuff ?
>> >
>> > Did so. This ends with:
>> >
>> > aba@phrixos:~$ sudo modprobe rtc-cmos
>> > FATAL: Error inserting rtc_cmos (/lib/modules/2.6.34-rc6aba3/kernel/drivers/rtc/rtc-cmos.ko): No such device
>> > aba@phrixos:~$
>> >
>>
>> ok, so it's not the bug I was thinking of. Your problem is that you
>> don't have a rtc_cmos device. The patch below should help. I think it
>> should work on your system but this remains to be confirmed.
>> Please try again with this patch and look at the logs to check if it's
>> making any difference.
>
> I still get:
> FATAL: Error inserting rtc_cmos (/lib/modules/2.6.34-rc6aba4/kernel/drivers/rtc/rtc-cmos.ko): No such device
>
> but in syslog, there is now:
> May 3 22:57:15 phrixos kernel: [ 33.860000] rtc_cmos: dev (254:0)
> May 3 22:57:15 phrixos kernel: [ 33.860000] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
> May 3 22:57:15 phrixos kernel: [ 33.864000] rtc_cmos rtc_cmos: only 24-hr BCD mode supported
> (these three lines appear once for each try)
Great. Much better. You're now seeing the message I was thinking of :)
Hopefully, with this new patch applied with the previous, you should
finally get your rtc0 device. Please test :)
Arnaud
As a follow-up to the thread about rtc support for some loongson 2e/2f
boards, this patch tries to address the "REVISIT"/"FIXME" comments about
rtc binary mode handling and allow rtc to work with rtc in binary mode.
I've also raised the message about 24-h mode not supported to warning
otherwise, one may end up with no rtc without any message in the kernel
log.
Signed-off-by: Arnaud Patard <apatard@mandriva.com>
---
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index e9aa814..9d99408 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -238,31 +238,32 @@ static int cmos_read_alarm(struct device *dev, struct rtc_wkalrm *t)
rtc_control = CMOS_READ(RTC_CONTROL);
spin_unlock_irq(&rtc_lock);
- /* REVISIT this assumes PC style usage: always BCD */
-
- if (((unsigned)t->time.tm_sec) < 0x60)
- t->time.tm_sec = bcd2bin(t->time.tm_sec);
- else
- t->time.tm_sec = -1;
- if (((unsigned)t->time.tm_min) < 0x60)
- t->time.tm_min = bcd2bin(t->time.tm_min);
- else
- t->time.tm_min = -1;
- if (((unsigned)t->time.tm_hour) < 0x24)
- t->time.tm_hour = bcd2bin(t->time.tm_hour);
- else
- t->time.tm_hour = -1;
-
- if (cmos->day_alrm) {
- if (((unsigned)t->time.tm_mday) <= 0x31)
- t->time.tm_mday = bcd2bin(t->time.tm_mday);
+ if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+ if (((unsigned)t->time.tm_sec) < 0x60)
+ t->time.tm_sec = bcd2bin(t->time.tm_sec);
else
- t->time.tm_mday = -1;
- if (cmos->mon_alrm) {
- if (((unsigned)t->time.tm_mon) <= 0x12)
- t->time.tm_mon = bcd2bin(t->time.tm_mon) - 1;
+ t->time.tm_sec = -1;
+ if (((unsigned)t->time.tm_min) < 0x60)
+ t->time.tm_min = bcd2bin(t->time.tm_min);
+ else
+ t->time.tm_min = -1;
+ if (((unsigned)t->time.tm_hour) < 0x24)
+ t->time.tm_hour = bcd2bin(t->time.tm_hour);
+ else
+ t->time.tm_hour = -1;
+
+ if (cmos->day_alrm) {
+ if (((unsigned)t->time.tm_mday) <= 0x31)
+ t->time.tm_mday = bcd2bin(t->time.tm_mday);
else
- t->time.tm_mon = -1;
+ t->time.tm_mday = -1;
+
+ if (cmos->mon_alrm) {
+ if (((unsigned)t->time.tm_mon) <= 0x12)
+ t->time.tm_mon = bcd2bin(t->time.tm_mon)-1;
+ else
+ t->time.tm_mon = -1;
+ }
}
}
t->time.tm_year = -1;
@@ -322,29 +323,26 @@ static void cmos_irq_disable(struct cmos_rtc *cmos, unsigned char mask)
static int cmos_set_alarm(struct device *dev, struct rtc_wkalrm *t)
{
struct cmos_rtc *cmos = dev_get_drvdata(dev);
- unsigned char mon, mday, hrs, min, sec;
+ unsigned char mon, mday, hrs, min, sec, rtc_control;
if (!is_valid_irq(cmos->irq))
return -EIO;
- /* REVISIT this assumes PC style usage: always BCD */
-
- /* Writing 0xff means "don't care" or "match all". */
-
mon = t->time.tm_mon + 1;
- mon = (mon <= 12) ? bin2bcd(mon) : 0xff;
-
mday = t->time.tm_mday;
- mday = (mday >= 1 && mday <= 31) ? bin2bcd(mday) : 0xff;
-
hrs = t->time.tm_hour;
- hrs = (hrs < 24) ? bin2bcd(hrs) : 0xff;
-
min = t->time.tm_min;
- min = (min < 60) ? bin2bcd(min) : 0xff;
-
sec = t->time.tm_sec;
- sec = (sec < 60) ? bin2bcd(sec) : 0xff;
+
+ rtc_control = CMOS_READ(RTC_CONTROL);
+ if (!(rtc_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+ /* Writing 0xff means "don't care" or "match all". */
+ mon = (mon <= 12) ? bin2bcd(mon) : 0xff;
+ mday = (mday >= 1 && mday <= 31) ? bin2bcd(mday) : 0xff;
+ hrs = (hrs < 24) ? bin2bcd(hrs) : 0xff;
+ min = (min < 60) ? bin2bcd(min) : 0xff;
+ sec = (sec < 60) ? bin2bcd(sec) : 0xff;
+ }
spin_lock_irq(&rtc_lock);
@@ -478,7 +476,7 @@ static int cmos_procfs(struct device *dev, struct seq_file *seq)
"update_IRQ\t: %s\n"
"HPET_emulated\t: %s\n"
// "square_wave\t: %s\n"
- // "BCD\t\t: %s\n"
+ "BCD\t\t: %s\n"
"DST_enable\t: %s\n"
"periodic_freq\t: %d\n"
"batt_status\t: %s\n",
@@ -486,7 +484,7 @@ static int cmos_procfs(struct device *dev, struct seq_file *seq)
(rtc_control & RTC_UIE) ? "yes" : "no",
is_hpet_enabled() ? "yes" : "no",
// (rtc_control & RTC_SQWE) ? "yes" : "no",
- // (rtc_control & RTC_DM_BINARY) ? "no" : "yes",
+ (rtc_control & RTC_DM_BINARY) ? "no" : "yes",
(rtc_control & RTC_DST_EN) ? "yes" : "no",
cmos->rtc->irq_freq,
(valid & RTC_VRT) ? "okay" : "dead");
@@ -749,12 +747,11 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq)
spin_unlock_irq(&rtc_lock);
- /* FIXME teach the alarm code how to handle binary mode;
+ /* FIXME:
* <asm-generic/rtc.h> doesn't know 12-hour mode either.
*/
- if (is_valid_irq(rtc_irq) &&
- (!(rtc_control & RTC_24H) || (rtc_control & (RTC_DM_BINARY)))) {
- dev_dbg(dev, "only 24-hr BCD mode supported\n");
+ if (is_valid_irq(rtc_irq) && !(rtc_control & RTC_24H)) {
+ dev_warn(dev, "only 24-hr supported\n");
retval = -ENXIO;
goto cleanup1;
}
Reply to: