[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Second Net interface on Qube1



* Thiemo Seufer <ths@networkno.de> [2005-03-23 11:42]:
> > First I can ping all ip addresses from a remote pc. eth0 is the
> > built-in nic on the Qube. If I unplug eth1 I can still ping the
> > ip 10.32.8.112. If I unplug eth0 all ip addresses loose connection.
> > I have never seen this behavior before.
> 
> Hm, this smells like yet another problem connected to the PCI
> bridge handling.

No, it's a configuration error.  I'm not a network expert, but I did
the same once and I was told you cannot have two devices on a machine
which are in the same sub-net (or have the same broadcast address or
whatever).


| eth0      Link encap:Ethernet  HWaddr 00:10:E0:00:13:AA
|           inet addr:10.32.8.99  Bcast:10.32.8.255  Mask:255.255.255.0

| eth1      Link encap:Ethernet  HWaddr 00:40:05:A2:FD:6B
|           inet addr:10.32.8.112  Bcast:10.32.8.255  Mask:255.255.255.0

-- 
Martin Michlmayr
http://www.cyrius.com/



Reply to: