Re: SUCCESS!!! Re: Installing Debian on a Qube 1
On Mon, Nov 08, 2004 at 02:52:28PM +0100, Martin B?hr wrote:
> > Judging by the chip on my IO board, the tulip driver is correct,
i wrote a script to run at boot to produce more debug output:
/proc/pci
PCI devices found:
Bus 0, device 7, function 0:
Ethernet controller: Digital Equipment Corporation DECchip 21041 [Tulip Pass 3] (rev 33).
IRQ 13.
I/O at 0x10100000 [0x1010007f].
Non-prefetchable 32 bit memory at 0x90003400 [0x9000347f].
Bus 0, device 10, function 0:
Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 8).
IRQ 9.
Master Capable. No bursts. Min Gnt=8.Max Lat=56.
Non-prefetchable 32 bit memory at 0x12001000 [0x12001fff].
I/O at 0x108000 [0x10803f].
Non-prefetchable 32 bit memory at 0x12100000 [0x121fffff].
/proc/interrupts
CPU0
0: 22651 Cobalt CPU timer
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
14: 37825 XT-PIC ide0
ERR: 0
lspci
0000:00:07.0 Ethernet controller: Digital Equipment Corporation DECchip 21041 [Tulip Pass 3] (rev 21)
0000:00:0a.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
is there a straightforward debian way to build a cross-compiling
environment?
or could someone with some time and a good heart build a kernel based on
martins config with the drivers as modules for the above two network
cards (or maybe all of them, so the kernel is usefull to anybody having
trouble with the tulip driver and wanting to try another on the extra
pci slot)?
(trying to think what i would need to set up so that the qube starts
compiling a kernel on its own)
greetings, martin.
--
- Pike - Caudium - sTeam - psycMUVE - LPC -
Pike Camp, October 13 - 19, 2004, Unperfekthaus, Essen, Germany
--
pike programmer travelling and working in europe open-steam.org
unix system- is.schon.org camp.gotpike.org
administrator bahai.or.at iaeste.(tuwien.ac|or).at
Martin Bähr http://www.iaeste.or.at/~mbaehr/
Reply to: