Re: SUCCESS!!! Re: Installing Debian on a Qube 1

[Peter Horton <pdh@colonel-panic.org>]

On Mon, Nov 08, 2004 at 07:47:03PM +0100, Martin B?hr wrote:
> On Mon, Nov 08, 2004 at 02:52:28PM +0100, Martin B?hr wrote:
> > > Judging by the chip on my IO board, the tulip driver is correct,
> 
> i wrote a script to run at boot to produce more debug output:
> /proc/pci
> PCI devices found:
>   Bus  0, device   7, function  0:
>     Ethernet controller: Digital Equipment Corporation DECchip 21041 [Tulip Pass 3] (rev 33).
>       IRQ 13.
>       I/O at 0x10100000 [0x1010007f].
>       Non-prefetchable 32 bit memory at 0x90003400 [0x9000347f].
>   Bus  0, device  10, function  0:
>     Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 8).
>       IRQ 9.
>       Master Capable.  No bursts.  Min Gnt=8.Max Lat=56.
>       Non-prefetchable 32 bit memory at 0x12001000 [0x12001fff].
>       I/O at 0x108000 [0x10803f].
>       Non-prefetchable 32 bit memory at 0x12100000 [0x121fffff].
> 
> /proc/interrupts
>            CPU0       
>   0:      22651      Cobalt CPU  timer
>   2:          0          XT-PIC  cascade
>   8:          1          XT-PIC  rtc
>  14:      37825          XT-PIC  ide0
> 
> ERR:          0
> 
> lspci
> 0000:00:07.0 Ethernet controller: Digital Equipment Corporation DECchip 21041 [Tulip Pass 3] (rev 21)
> 0000:00:0a.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
> 

Any chance of a full boot log and a full /proc/pci / lspci -vvx ?

P.