...
Ok, I followed these steps.
no output to show so far,
except for this one:
ibanez@debian-med:/tmp/fis-gtm-initial_build$ find . -name .svn -type d -exec rm -rf \{\} \;
find: `./debian/.svn': No such file or directory
find: `./debian/po/.svn': No such file or directory
find: `./debian/source/.svn': No such file or directory
Then, at this point I'm in the directory
/tmp/fis-gtm-initial_build
where "ls -l" returns:
total 19564
drwxr-xr-x 4 ibanez ibanez 4096 Jan 24 18:18 debian
drwxr-xr-x 2 ibanez ibanez 4096 Jan 24 16:39 fis-gtm-initial
-rw-r--r-- 1 ibanez ibanez 20000473 Jan 24 18:17 fis-gtm-initial_54002B.orig.tar.gz
and when doing "debuild", I get:
This package has a Debian revision number but there does not seem to be
an appropriate original tar file or .orig directory in the parent directory;
(expected one of fis-gtm-initial_54002B.orig.tar.gz, fis-gtm-initial_54002B.orig.tar.bz2,
fis-gtm-initial_54002B.orig.tar.lzma, fis-gtm-initial_54002B.orig.tar.xz or fis-gtm-initial_build.orig)
continue anyway? (y/n)
The message seems to indicate that I should
be one directory below the location of the file:
fis-gtm-initial_54002B.orig.tar.gz
so, as a wild guess I go into:
/tmp/fis-gtm-initial_build/fis-gtm-initial
then do "debuild" in there, and get:
debuild: found debian/changelog for package fis-gtm-initial in the directory
/tmp/fis-gtm-initial_build
but this directory name does not match the package name according to the
regex PACKAGE(-.+)?.
To run debuild on this package, see the --check-dirname-level and
--check-dirname-regex options; run debuild --help for more info.
being stubborn, I copy the debian directory here:
cp -a ../debian/ .
and try "debuild" again,
and then some sort of Happiness follows :-)
dpkg-buildpackage -rfakeroot -D -us -uc
dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor):
dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor):
dpkg-buildpackage: source package fis-gtm-initial
dpkg-buildpackage: source version 54002B-1
dpkg-buildpackage: source changed by Andreas Tille <
tille@debian.org>
dpkg-source --before-build fis-gtm-initial
dpkg-buildpackage: host architecture i386
fakeroot debian/rules clean
dh clean
dh_testdir
debian/rules override_dh_auto_clean
make[1]: Entering directory `/tmp/fis-gtm-initial_build/fis-gtm-initial'
dh_auto_clean
rm -f debian/defaults.template
make[1]: Leaving directory `/tmp/fis-gtm-initial_build/fis-gtm-initial'
dh_clean
dpkg-source -b fis-gtm-initial
dpkg-source: info: using source format `3.0 (quilt)'
dpkg-source: info: building fis-gtm-initial using existing ./fis-gtm-initial_54002B.orig.tar.gz
dpkg-source: info: building fis-gtm-initial in fis-gtm-initial_54002B-1.debian.tar.gz
dpkg-source: info: building fis-gtm-initial in fis-gtm-initial_54002B-1.dsc
debian/rules build
dh build
dh_testdir
debian/rules override_dh_auto_configure
make[1]: Entering directory `/tmp/fis-gtm-initial_build/fis-gtm-initial'
echo "do not configure anything in this step"
do not configure anything in this step
make[1]: Leaving directory `/tmp/fis-gtm-initial_build/fis-gtm-initial'
dh_auto_build
dh_auto_test
fakeroot debian/rules binary
dh binary
dh_testroot
dh_prep
dh_installdirs
debian/rules override_dh_auto_install
make[1]: Entering directory `/tmp/fis-gtm-initial_build/fis-gtm-initial'
# that's a pretty complex way to copy the gtm tarball to a certain dir - let's rather do this directly
# cat debian/install.template > debian/install
# echo "/usr/lib/fis-gtm" >> debian/install
mkdir -p debian/fis-gtm-initial//usr/lib/fis-gtm/distribution
# Considering that there are two distinct tarballs in the original tarball copying both into the
# target binary deb is just wrong - wee need to grep for the right architecture as well
cp -a `ls -1 | grep -v debian | grep i386` debian/fis-gtm-initial//usr/lib/fis-gtm/distribution
cat debian/defaults.template.template |\
sed "s?RRRRR?/usr/lib/fis-gtm?g" |\
sed "s/VVVVV/54002B/g" > debian/defaults.template
make[1]: Leaving directory `/tmp/fis-gtm-initial_build/fis-gtm-initial'
dh_install
dh_installdocs
dh_installchangelogs
dh_installexamples
dh_installman
dh_installcatalogs
dh_installcron
dh_installdebconf
dh_installemacsen
dh_installifupdown
dh_installinfo
dh_pysupport
dh_installinit
dh_installmenu
dh_installmime
dh_installmodules
dh_installlogcheck
dh_installlogrotate
dh_installpam
dh_installppp
dh_installudev
dh_installwm
dh_installxfonts
dh_bugfiles
dh_lintian
dh_gconf
dh_icons
dh_perl
dh_usrlocal
dh_link
dh_compress
dh_fixperms
dh_strip
dh_makeshlibs
dh_shlibdeps
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package `fis-gtm-initial' in `../fis-gtm-initial_54002B-1_i386.deb'.
dpkg-genchanges >../fis-gtm-initial_54002B-1_i386.changes
dpkg-genchanges: including full source code in upload
dpkg-source --after-build fis-gtm-initial
dpkg-buildpackage: full upload (original source is included)
Now running lintian...
W: fis-gtm-initial source: newer-standards-version 3.9.2 (current is 3.9.1)
Finished running lintian.
Now signing changes and any dsc files...
signfile fis-gtm-initial_54002B-1.dsc Andreas Tille <
tille@debian.org>
gpg: keyring `/home/ibanez/.gnupg/secring.gpg' created
gpg: keyring `/home/ibanez/.gnupg/pubring.gpg' created
gpg: skipped "Andreas Tille <
tille@debian.org>": secret key not available
gpg: /tmp/debsign.MBn96VZG/fis-gtm-initial_54002B-1.dsc: clearsign failed: secret key not available
debsign: gpg error occurred! Aborting....
debuild: fatal error at line 1246:
running debsign failed
I guess that all these messages are good news,
and that the error at the end is simply due to
some specific keys being required for that step.
-----
Summary,
Retracing the steps, it looks like the one below
is the process that works for me in this new
installation:
mkdir /tmp/fis-gtm-initial_build
cd /tmp/fis-gtm-initial_build
cp /home/ibanez/src/debian-med/trunk/packages/fis-gtm/fis-gtm-initial/fis-gtm-initial_54002B.orig.tar.gz .
tar -xzf fis-gtm-initial_54002B.orig.tar.gz
cd fis-gtm-initial/
cp -a /home/ibanez/src/debian-med/trunk/packages/fis-gtm/fis-gtm-initial/trunk/debian/ .
at this point "pwd" returns:
/tmp/fis-gtm-initial_build/fis-gtm-initial
and "ls -l" returns:
total 19840
drwxr-xr-x 5 ibanez ibanez 4096 Jan 24 16:57 debian
-rw-r--r-- 1 ibanez ibanez 10024159 Jan 24 16:39 gtm_V54002B_linux_i686_pro-i386.tar.gz
-rw-r--r-- 1 ibanez ibanez 10251995 Jan 24 16:39 gtm_V54002B_linux_x8664_pro-amd64.tar.gz
Then I do "debuild" and get:
dpkg-buildpackage -rfakeroot -D -us -uc
dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor):
dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2
dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor):
dpkg-buildpackage: source package fis-gtm-initial
dpkg-buildpackage: source version 54002B-1
dpkg-buildpackage: source changed by Andreas Tille <
tille@debian.org>
dpkg-source --before-build fis-gtm-initial
dpkg-buildpackage: host architecture i386
fakeroot debian/rules clean
dh clean
dh_testdir
debian/rules override_dh_auto_clean
make[1]: Entering directory `/tmp/fis-gtm-initial_build/fis-gtm-initial'
dh_auto_clean
rm -f debian/defaults.template
make[1]: Leaving directory `/tmp/fis-gtm-initial_build/fis-gtm-initial'
dh_clean
dpkg-source -b fis-gtm-initial
dpkg-source: info: using source format `3.0 (quilt)'
dpkg-source: info: building fis-gtm-initial using existing ./fis-gtm-initial_54002B.orig.tar.gz
dpkg-source: info: building fis-gtm-initial in fis-gtm-initial_54002B-1.debian.tar.gz
dpkg-source: info: building fis-gtm-initial in fis-gtm-initial_54002B-1.dsc
debian/rules build
dh build
dh_testdir
debian/rules override_dh_auto_configure
make[1]: Entering directory `/tmp/fis-gtm-initial_build/fis-gtm-initial'
echo "do not configure anything in this step"
do not configure anything in this step
make[1]: Leaving directory `/tmp/fis-gtm-initial_build/fis-gtm-initial'
dh_auto_build
dh_auto_test
fakeroot debian/rules binary
dh binary
dh_testroot
dh_prep
dh_installdirs
debian/rules override_dh_auto_install
make[1]: Entering directory `/tmp/fis-gtm-initial_build/fis-gtm-initial'
# that's a pretty complex way to copy the gtm tarball to a certain dir - let's rather do this directly
# cat debian/install.template > debian/install
# echo "/usr/lib/fis-gtm" >> debian/install
mkdir -p debian/fis-gtm-initial//usr/lib/fis-gtm/distribution
# Considering that there are two distinct tarballs in the original tarball copying both into the
# target binary deb is just wrong - wee need to grep for the right architecture as well
cp -a `ls -1 | grep -v debian | grep i386` debian/fis-gtm-initial//usr/lib/fis-gtm/distribution
cat debian/defaults.template.template |\
sed "s?RRRRR?/usr/lib/fis-gtm?g" |\
sed "s/VVVVV/54002B/g" > debian/defaults.template
make[1]: Leaving directory `/tmp/fis-gtm-initial_build/fis-gtm-initial'
dh_install
dh_installdocs
dh_installchangelogs
dh_installexamples
dh_installman
dh_installcatalogs
dh_installcron
dh_installdebconf
dh_installemacsen
dh_installifupdown
dh_installinfo
dh_pysupport
dh_installinit
dh_installmenu
dh_installmime
dh_installmodules
dh_installlogcheck
dh_installlogrotate
dh_installpam
dh_installppp
dh_installudev
dh_installwm
dh_installxfonts
dh_bugfiles
dh_lintian
dh_gconf
dh_icons
dh_perl
dh_usrlocal
dh_link
dh_compress
dh_fixperms
dh_strip
dh_makeshlibs
dh_shlibdeps
dh_installdeb
dh_gencontrol
dh_md5sums
dh_builddeb
dpkg-deb: building package `fis-gtm-initial' in `../fis-gtm-initial_54002B-1_i386.deb'.
dpkg-genchanges >../fis-gtm-initial_54002B-1_i386.changes
dpkg-genchanges: including full source code in upload
dpkg-source --after-build fis-gtm-initial
dpkg-buildpackage: full upload (original source is included)
Now running lintian...
W: fis-gtm-initial source: newer-standards-version 3.9.2 (current is 3.9.1)
Finished running lintian.
Now signing changes and any dsc files...
signfile fis-gtm-initial_54002B-1.dsc Andreas Tille <
tille@debian.org>
gpg: skipped "Andreas Tille <
tille@debian.org>": secret key not available
gpg: /tmp/debsign.elh7rtXS/fis-gtm-initial_54002B-1.dsc: clearsign failed: secret key not available
debsign: gpg error occurred! Aborting....
debuild: fatal error at line 1246:
running debsign failed
----
I hope this is not too verbose for a report.
Thanks
Luis