Re: Configuring Network

[Clive Menzies <clive@clivemenzies.co.uk>]

On (11/02/06 18:29), Henrique Rennó wrote:
> I'm using static.
> 
> ifconfig results:
> 
> eth0    Encapsulamento do Link: Ethernet    Endereço de HW 00:C0:9F:88:E6:52
>           inet end.: 192.168.0.1   Bcast:192.168.0.255   Masc: 255.255.255.0
>           UP BROADCASTRUNNING MULTICAST MTU:1500    Métrica: 1
>           RX packets: 0   errors:0 dropped:0  overruns:0  frame:0
>           TX packets:105  errors:0  dropped:0  overruns:0  carrier:0
>           colisões:0  txqueuelen:1000
>           RX bytes:0 (0.0 b)  TX bytes:4410  (4.3 KiB)
>           IRQ:19  Endereço de E/S:0x1800
> lo       Encapsulamento do Link: Loopback Local
>           inet end.: 127.0.0.1  Masc: 255.0.0.0
>           UP LOOPBACKRUNNING  MTU:16436   Métrica:1
>           RX packets:50 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:50 errors:0 dropped:0 overruns:0 carrier:0
>           colisões:0 txqueuelen:0
>           RX bytes:4432 (4.3 KiB) TX bytes:4432 (4.3 KiB)
> 
> My system is in portuguese because I'm brazilian.
> 
> The line before the last line of eth0 has RX bytes:0 (0.0 b), what I
> think it's because the network card didn't receive any packages.
> 
> When I type /etc/init.d/networking restart comes:
> 
> Setting up IP spoofing protection: rp_filter.
> Reconfiguring network interfaces...ifup: interface lo already configured
> done.
> aspire:~# eth0: Media Link On 100mbps full-duplex
> 
> This last line hangs and I have to type CTRL+C to return to the shell.

Try setting a different IP address; are you sure nothing else on your
network is using that address (router/modem perhaps)? 

Another thing to try is booting from a Live CD and seeing if the eth0
interface works under that.

Regards

Clive

-- 
www.clivemenzies.co.uk ...
...strategies for business