Re: eth1 without eth0
On Mon, May 10, 2004 at 03:38:44PM -0400, Curt Howland wrote:
> I'd say the first thing to do is run iwconfig and see at what
> interface your wireless card is being seen. I have noticed that it
> changes from time to time when changing kernels, and even kernel
> versions.
Hmm...iwconfig is not found on my system...
Here's the successful ifconfig on the 2.4 kernel:
eth0 Link encap:Ethernet HWaddr 00:00:E2:8D:22:8B
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:90 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:30780 (30.0 KiB)
Interrupt:10 Base address:0xc000
eth1 Link encap:Ethernet HWaddr 00:02:2D:56:0C:29
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6583 errors:0 dropped:0 overruns:0 frame:0
TX packets:9639 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:2505542 (2.3 MiB) TX bytes:10139750 (9.6 MiB)
Interrupt:11 Base address:0x100
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:5979 errors:0 dropped:0 overruns:0 frame:0
TX packets:5979 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1196240 (1.1 MiB) TX bytes:1196240 (1.1 MiB)
And here's the unsuccessful 2.6.5 version of the same information:
eth1 Link encap:Ethernet HWaddr 00:02:2D:56:0C:29
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:11 Base address:0x100
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:560 (560.0 b) TX bytes:560 (560.0 b)
--
Emma Jane Hogbin
[[ 416 417 2868 ][ www.xtrinsic.com ]]
Reply to: