Re: Re[2]: Driver for winmodem smartlink Hamr 5600
On Tuesday 14 May 2002 09:38, Mark Janssen wrote:
> > .....
> > slmdm: country set is 0x59 (ITALY).
> > Smart Link AMRMO modem.
> > amrmo: probe 1039:7018 Silicon Integrated Systems [SiS] SiS PCI Audio
> > Accelerator : SiS 960 card...
> > PCI: Found IRQ 10 for device 00:01.4
> > PCI: Sharing IRQ 10 with 00:01.6
> > PCI: Sharing IRQ 10 with 00:03.0
> > amrmo: probe 1039:7013 PCI device 1039:7013 (Silicon Integrated Systems
> > [SiS]) : SiS 630 card...
> > PCI: Found IRQ 10 for device 00:01.6
> > PCI: Sharing IRQ 10 with 00:01.4
> > PCI: Sharing IRQ 10 with 00:03.0
>
> You could try unloading the module for your soundcard first (in my case
> trident.o) and check which devices are sharing IRQ's here
> (lspci and look for what devices use 00:01.4/6 and 00:03.0)
The other devices (00:01.6 is the modem) are the cardbus bridge (for pcmcia
I suppose) and the sound controller, here's the output of lspci -v:
-----------
00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS PCI
Audio Accelerator (rev 01)
Subsystem: Uniwill Computer Corp: Unknown device 5001
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at d400 [size=256]
Memory at ffdf0000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>
00:01.6 Modem: Silicon Integrated Systems [SiS]: Unknown device 7013 (rev a0)
(prog-if 00 [Generic])
Subsystem: Uniwill Computer Corp: Unknown device 4003
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at dc00 [size=256]
I/O ports at d800 [size=128]
Capabilities: <available only to root>
00:03.0 CardBus bridge: O2 Micro, Inc. OZ6812 Cardbus Controller (rev 05)
Subsystem: Uniwill Computer Corp: Unknown device 3000
Flags: bus master, stepping, slow devsel, latency 168, IRQ 10
Memory at 10000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 10400000-107ff000 (prefetchable)
Memory window 1: 10800000-10bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
16-bit legacy interface ports at 0001
-------------
Could you send me your output of lspci -v to see the differences?
> 3 devices on one ICQ can cause some problems... try if you can to
> disable some of them or get them working on another icq.
Do you know if there is a way to assign irq from Linux? I can't do it from my
bios.
> If it doesn't work, contact Smartlink, their getting more responsive to
> support-emails nowadays :)
>
> (/me is currently working with some smartlink tech to fix my own
> hamr5600 problem)
Ok, thanks a lot.
Bye,
Rick
--
To UNSUBSCRIBE, email to debian-laptop-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: