[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Xircom XE 2000 issues

Adam C Powell IV wrote:

Chris Sutcliffe wrote:

I'm trying to get my Xircom XE 2000 PCMCIA network card working. I can get a link light on both the card and the router, ifconfig displays all the configuration information correctly, and the route table is setup correctly. I've read various messages around the 'net saying to put the card in promisc mode, which I tried, with no success.

How did you install Debian on this machine? I had the same symptoms on a Xircom card

Correction: it was an IBM EtherJet 10/100, which is a clone of an older Xircom card. And it was the 2.2R3 disks that made it work, but R4 or R5 should be as good. The symptoms are still similar enough that the fix is likely to work...


-Adam P.

GPG fingerprint: D54D 1AEE B11C CE9B A02B  C5DD 526F 01E8 564E E4B6

Welcome to the best software in the world today cafe! <http://lyre.mit.edu/%7Epowell/The_Best_Stuff_In_The_World_Today_Cafe.ogg>

Reply to: