Re: Module for ES1888?
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
>>>>> "Rodin" == Rodin Fadul <mr_inter_man@hotmail.com> writes:
Rodin> Hello. I own a Dell Latitude Xpi with a ESS ES1888 Plug & Play
Rodin> AudioDrive. I've been told that I have to use modconf in order to
Rodin> include the module to support my sound card. The problem is there
Rodin> are varius modules that refer to ESS cards, which should I use?
Rodin> And how do I configure it afterwards?. THANKS. (I hope I've
Rodin> included enough information this time, sorry for before :-)
Rodin> inexperience is a b***h.
I don't have an ES1888 card, but...
,----[ kernel-source-2.4.7/Documentation/sound/ESS ]
| Documentation for the ESS AudioDrive chips
|
| In 2.4 kernels the SoundBlaster driver not only tries to detect an ESS chip, it
| tries to detect the type of ESS chip too. The correct detection of the chip
| doesn't always succeed however, so unless you use the kernel isapnp facilities
| (and you chip is pnp capable) the default behaviour is 2.0 behaviour which
| means: only detect ES688 and ES1688.
|
| All ESS chips now have a recording level setting. This is a need-to-have for
| people who want to use their ESS for recording sound.
|
| Every chip that's detected as a later-than-es1688 chip has a 6 bits logarithmic
| master volume control.
|
| Every chip that's detected as a ES1887 now has Full Duplex support. Made a
| little testprogram that shows that is works, haven't seen a real program that
| needs this however.
|
| For ESS chips an additional parameter "esstype" can be specified. This controls
| the (auto) detection of the ESS chips. It can have 3 kinds of values:
|
| -1 Act like 2.0 kernels: only detect ES688 or ES1688.
| 0 Try to auto-detect the chip (may fail for ES1688)
| 688 The chip will be treated as ES688
| 1688 ,, ,, ,, ,, ,, ,, ES1688
| 1868 ,, ,, ,, ,, ,, ,, ES1868
| 1869 ,, ,, ,, ,, ,, ,, ES1869
| 1788 ,, ,, ,, ,, ,, ,, ES1788
| 1887 ,, ,, ,, ,, ,, ,, ES1887
| 1888 ,, ,, ,, ,, ,, ,, ES1888
|
| Because Full Duplex is supported for ES1887 you can specify a second DMA
| channel by specifying module parameter dma16. It can be one of: 0, 1, 3 or 5.
|
`----
So... It seems like you want the SoundBlaster driver (sb.o I think),
and maybe add an esstype parameter.
Of course, this is for kernel 2.4. Anyone know about 2.2?
Hubert
- --
Hubert Chan <hackerhue@geek.com> - http://www.geocities.com/hubertchan/
PGP/GnuPG key: 1024D/71FDA37F
Fingerprint: 6CC5 822D 2E55 494C 81DD 6F2C 6518 54DF 71FD A37F
Key available at wwwkeys.pgp.net. Please encrypt *all* e-mail to me.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE7shY3ZRhU33H9o38RAiRaAJ9w2rcplQhj7iEG2wuijI54OgNoyQCgnGi0
ZSxbEM9PJE8YfLp00Pt6ojk=
=b9CV
-----END PGP SIGNATURE-----
Reply to: