[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Network configuration conflicts with PCMCIA ethernet card

Drew Parsons <dparsons@emerall.com> writes:
> The problem is probably related to your having your default gateway set to
> the local address, and therefore there being no route from the local address
> to the new ppp address.

But on a local network, you should have no gateway!  I'm not shure
where it is configured, but try to remove the gateway from the
conffiles.  With the network card only,  netstat -r should have no
line with a * in the Destination column.

And don't change without remembering how to change back if it doesn't work...

HTH, but if the problem persists,send the output of `/sbin/route -n'.


Mikael Hedin, MSc                   +46 (0)980 79176
Swedish Institute of Space Physics  +46 (0)8 344979 (home)
Box 812, S-981 28 KIRUNA, Sweden    +46 (0)70 5891533 (mobile)
[gpg key fingerprint = 387F A8DB DC2A 50E3 FE26  30C4 5793 29D3 C01B 2A22]

Reply to: