Re: [debian-knoppix] Knoppix Autoconfig hangs with systems using Firewire / IEEE 1394
Am Freitag, 11. Oktober 2002 16:16 schrieb Jeff Penno:
> Hi,
>
> I've got two computers that have firewire / IEE1394 cards that are hanging
> during the autoconfiguration -- first is a laptop (HP N5445 P3 1.06GHz) and
> the other is a desktop (HP 760N, P4 1.8Ghz). I've tested the program on
> two other desktops and an HP 5450 laptop and it worked flawlessly (even
> discovered the D-Link 802.11b wifi card & hooked the laptop up to the
> network!)
>
> I was able to get the 760N desktop to work with Knoppix by physically
> removing the firewire card, but that's impossible with the laptop. Both
> firewire devices are controlled via PCI Bus 2. The desktop uses a firewire
> card based on an Agere chip, and the laptop is using one based on a Texas
> Instruments OHCI.
>
> Is there a command (cheat code) that can be entered to disable the
> autoconfig scanning these devices like the noscsi one?
Hi this is a know problem, thanx for reporting though ...
It is fixed since version 10-10-2002, please use this if you can!
cu
Fabian
>
> Thanks,
>
> Jeff.
>
> _________________________________________________________________
> MSN Photos is the easiest way to share and print your photos:
> http://photos.msn.com/support/worldwide.aspx
>
> _______________________________________________
> debian-knoppix mailing list
> debian-knoppix@linuxtag.org
> http://mailman.linuxtag.org/mailman/listinfo/debian-knoppix
_______________________________________________
debian-knoppix mailing list
debian-knoppix@linuxtag.org
http://mailman.linuxtag.org/mailman/listinfo/debian-knoppix
Reply to: