Bug#710004: linux-image-3.2.0-4-amd64: lxc-checkcopnfig reports missing CONFIG_CGROUP_NS
Package: src:linux
Version: 3.2.41-2+deb7u2
Severity: important
* This is a "clean upgraded" Debian, from recent Debian-6 installation
* since OpenVZ is missing, I've installed LXC packages, did lxc-create
and lxc-start
* What was the outcome:
lxc-start: No cgroup mounted on the system; lxc-start: failed to spawn ...
* What you've expected:
lxc-start: OK.
lcx-checkconfig reports some missing components:
--- Namespaces ---
Namespaces: enabled
Utsname namespace: enabled
Ipc namespace: enabled
Pid namespace: enabled
User namespace: enabled
Network namespace: enabled
Multiple /dev/pts instances: enabled
--- Control groups ---
Cgroup: enabled
Cgroup namespace: CONFIG_CGROUP_NSmissing
^^^^^^^
Cgroup device: enabled
Cgroup sched: enabled
Cgroup cpu account: enabled
Cgroup memory controller: enabled
Cgroup cpuset: enabled
--- Misc ---
Veth pair device: enabled
Macvlan: enabled
Vlan: enabled
File capabilities: enabled
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/bronek-root ro quiet
** Not tainted
** Kernel log:
[ 1.268111] cciss 0000:04:03.0: cciss0: <0x46> at PCI 0000:04:03.0 IRQ 19 using DAC
[ 1.295566] cciss/c0d0: p1 p2 < p5 >
[ 1.296193] scsi0 : cciss
[ 1.336075] libata version 3.00 loaded.
[ 1.336826] ata_piix 0000:00:1f.1: version 2.13
[ 1.336840] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.336847] ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
[ 1.336907] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.337425] scsi1 : ata_piix
[ 1.337574] scsi2 : ata_piix
[ 1.337660] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
[ 1.337663] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
[ 1.354255] e1000 0000:0a:01.0: eth1: (PCI-X:133MHz:64-bit) 00:0e:0c:b3:c8:0c
[ 1.354267] e1000 0000:0a:01.0: eth1: Intel(R) PRO/1000 Network Connection
[ 1.354300] e1000 0000:0a:01.1: PCI IRQ 98 -> rerouted to legacy IRQ 18
[ 1.366788] tg3 0000:03:01.1: eth2: Tigon3 [partno(N/A) rev 2100] (PCIX:133MHz:64-bit) MAC address 00:13:21:f1:98:c8
[ 1.366793] tg3 0000:03:01.1: eth2: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 1.366797] tg3 0000:03:01.1: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.366801] tg3 0000:03:01.1: eth2: dma_rwctrl[769f4000] dma_mask[64-bit]
[ 1.500301] ata1.00: ATAPI: CD-224E, 9.9A, max MWDMA2
[ 1.516188] ata1.00: configured for MWDMA2
[ 1.518567] scsi 1:0:0:0: CD-ROM TEAC CD-224E 9.9A PQ: 0 ANSI: 5
[ 1.528605] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 1.528612] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.528914] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.532694] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.662086] e1000 0000:0a:01.1: eth3: (PCI-X:133MHz:64-bit) 00:0e:0c:b3:c8:0d
[ 1.662095] e1000 0000:0a:01.1: eth3: Intel(R) PRO/1000 Network Connection
[ 1.696033] Refined TSC clocksource calibration: 3600.127 MHz.
[ 1.696041] Switching to clocksource tsc
[ 4.096034] floppy0: no floppy controllers found
[ 4.490356] device-mapper: uevent: version 1.0.3
[ 4.490513] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 5.112066] PM: Starting manual resume from disk
[ 5.112073] PM: Hibernation image partition 254:1 present
[ 5.112076] PM: Looking for hibernation image.
[ 5.127116] PM: Image not found (code -22)
[ 5.127120] PM: Hibernation image not present or could not be loaded.
[ 7.066583] udevd[325]: starting version 175
[ 7.367739] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.392084] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 7.392100] ACPI: Power Button [PWRF]
[ 7.510939] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 7.594905] Floppy drive(s): fd0 is 1.44M
[ 7.604970] udevd[348]: renamed network interface eth2 to rename4
[ 7.620842] udevd[341]: renamed network interface eth1 to eth2
[ 7.696801] udevd[348]: renamed network interface rename4 to eth1
[ 7.787765] hpwdt 0000:01:04.0: This server does not have an iLO2+ ASIC.
[ 7.793807] EDAC MC: Ver: 2.1.0
[ 7.983508] Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden
[ 7.992558] Error: Driver 'pcspkr' is already registered, aborting...
[ 8.105060] intel_rng: FWH not detected
[ 8.156460] iTCO_vendor_support: vendor-support=0
[ 8.175934] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 8.176145] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 8.339831] psmouse serio1: bad data from KBC - timeout
[ 8.364916] psmouse serio1: bad data from KBC - timeout
[ 8.390003] psmouse serio1: bad data from KBC - timeout
[ 8.415076] psmouse serio1: bad data from KBC - timeout
[ 8.950310] psmouse serio1: bad data from KBC - timeout
[ 8.975385] psmouse serio1: bad data from KBC - timeout
[ 9.000468] psmouse serio1: bad data from KBC - timeout
[ 9.535712] psmouse serio1: bad data from KBC - timeout
[ 9.560783] psmouse serio1: bad data from KBC - timeout
[ 9.585861] psmouse serio1: bad data from KBC - timeout
[ 10.156144] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input3
[ 10.171622] psmouse serio1: Failed to enable mouse on isa0060/serio1
[ 10.616038] floppy0: no floppy controllers found
[ 11.947679] loop: module loaded
[ 13.522394] Adding 2895868k swap on /dev/mapper/bronek-swap_1. Priority:-1 extents:1 across:2895868k
[ 14.532334] JFS: nTxBlock = 8192, nTxLock = 65536
[ 17.121049] ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 17.124455] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 17.125156] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 17.850067] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.891712] tg3 0000:03:01.1: firmware: agent loaded tigon/tg3_tso.bin into memory
[ 18.261249] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 18.264616] ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 18.337415] RPC: Registered named UNIX socket transport module.
[ 18.337422] RPC: Registered udp transport module.
[ 18.337425] RPC: Registered tcp transport module.
[ 18.337428] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 18.401988] FS-Cache: Loaded
[ 18.480799] FS-Cache: Netfs 'nfs' registered for caching
[ 18.525854] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 19.991682] tg3 0000:03:01.1: eth1: Link is up at 100 Mbps, full duplex
[ 19.991688] tg3 0000:03:01.1: eth1: Flow control is off for TX and off for RX
[ 19.992283] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 20.259585] tg3 0000:03:01.0: eth0: Link is up at 1000 Mbps, full duplex
[ 20.259592] tg3 0000:03:01.0: eth0: Flow control is off for TX and off for RX
[ 20.260266] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 22.982558] Ebtables v2.0 registered
[ 23.399390] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.727357] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 28.128013] eth2: no IPv6 routers present
[ 30.024010] eth1: no IPv6 routers present
[ 30.304009] eth0: no IPv6 routers present
[ 33.358431] postgres (2510): /proc/2510/oom_adj is deprecated, please use /proc/2510/oom_score_adj instead.
[ 37.461324] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 56.043063] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
** Model information
sys_vendor: HP
product_name: ProLiant DL380 G4
product_version:
chassis_vendor: HP
chassis_version:
bios_vendor: HP
bios_version: P51
** Loaded modules:
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_state
nf_conntrack
ip6table_filter
ip6_tables
iptable_filter
ip_tables
ebtable_nat
ebtables
x_tables
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
jfs
loop
iTCO_wdt
iTCO_vendor_support
e752x_edac
rng_core
snd_pcm
snd_page_alloc
psmouse
edac_core
hpwdt
evdev
hpilo
snd_timer
snd
soundcore
serio_raw
pcspkr
container
button
shpchp
processor
ext2
mbcache
dm_mod
sg
sr_mod
cdrom
ata_generic
ata_piix
libata
cciss
scsi_mod
uhci_hcd
e1000
thermal
thermal_sys
ehci_hcd
tg3
libphy
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation E7520 Memory Controller Hub [8086:3590] (rev 0c)
Subsystem: Compaq Computer Corporation Device [0e11:3200]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI Express Port A [8086:3595] (rev 0c) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fdd00000-fdefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Intel Corporation E7520 PCI Express Port C [8086:3599] (rev 0c) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 3000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 3020 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fbef0000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00001000-00002fff
Memory behind bridge: fbf00000-fcffffff
Prefetchable memory behind bridge: f0200000-f02fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Compaq Computer Corporation Device [0e11:3201]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 255
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 0500 [size=16]
Region 5: Memory at f0300000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
01:03.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Rage XL [1002:4752] (rev 27) (prog-if 00 [VGA controller])
Subsystem: Compaq Computer Corporation Proliant Rage XL [0e11:001e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at fbff0000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at f0200000 [disabled] [size=128K]
Capabilities: <access denied>
01:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] (rev 01)
Subsystem: Compaq Computer Corporation Device [0e11:b206]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at fbfe0000 (32-bit, non-prefetchable) [size=512]
Capabilities: <access denied>
01:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Processor [0e11:b204] (rev 01)
Subsystem: Compaq Computer Corporation Device [0e11:b206]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at 2400 [size=256]
Region 1: Memory at fbfd0000 (32-bit, non-prefetchable) [size=2K]
Region 2: Memory at fbfc0000 (32-bit, non-prefetchable) [size=8K]
Region 3: Memory at fbf00000 (32-bit, non-prefetchable) [size=512K]
[virtual] Expansion ROM at f0220000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: hpilo
02:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
Memory behind bridge: fdd00000-fddfffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
02:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=02, secondary=04, subordinate=04, sec-latency=64
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
03:01.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet [14e4:1648] (rev 10)
Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter (PCI-X, 10,100,1000-T) [0e11:00d0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fddf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
03:01.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet [14e4:1648] (rev 10)
Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter (PCI-X, 10,100,1000-T) [0e11:00d0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fdde0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
04:03.0 RAID bus controller [0104]: Compaq Computer Corporation Smart Array 64xx [0e11:0046] (rev 01)
Subsystem: Compaq Computer Corporation Smart Array 6i [0e11:4091]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fdef0000 (64-bit, non-prefetchable) [size=8K]
Region 2: I/O ports at 4000 [size=256]
Region 3: Memory at fde80000 (64-bit, non-prefetchable) [size=256K]
[virtual] Expansion ROM at f0000000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: cciss
05:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=06, subordinate=09, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
05:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=0a, subordinate=0c, sec-latency=64
I/O behind bridge: 00005000-00005fff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0a:01.0 Ethernet controller [0200]: Intel Corporation 82546GB Gigabit Ethernet Controller [8086:1079] (rev 03)
Subsystem: Intel Corporation Device [8086:118a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fdfe0000 (64-bit, non-prefetchable) [size=128K]
Region 2: Memory at fdf80000 (64-bit, non-prefetchable) [size=256K]
Region 4: I/O ports at 5000 [size=64]
[virtual] Expansion ROM at f0100000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: e1000
0a:01.1 Ethernet controller [0200]: Intel Corporation 82546GB Gigabit Ethernet Controller [8086:1079] (rev 03)
Subsystem: Intel Corporation Device [8086:118a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fdf60000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at 5040 [size=64]
Capabilities: <access denied>
Kernel driver in use: e1000
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 7.0
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
* linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: