Your message dated Mon, 27 May 2013 16:23:10 +0100 with message-id <1369668190.3469.363.camel@deadeye.wl.decadent.org.uk> and subject line Re: Bug#710004: linux-image-3.2.0-4-amd64: lxc-checkcopnfig reports missing CONFIG_CGROUP_NS has caused the Debian Bug report #710004, regarding linux-image-3.2.0-4-amd64: lxc-checkcopnfig reports missing CONFIG_CGROUP_NS to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 710004: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=710004 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.2.0-4-amd64: lxc-checkcopnfig reports missing CONFIG_CGROUP_NS
- From: Rafal Pietrak <rafal@zorro.isa-geek.com>
- Date: Mon, 27 May 2013 14:26:59 +0200
- Message-id: <[🔎] 20130527122659.3678.61356.reportbug@bronek.ztk-rp.eu>
Package: src:linux Version: 3.2.41-2+deb7u2 Severity: important * This is a "clean upgraded" Debian, from recent Debian-6 installation * since OpenVZ is missing, I've installed LXC packages, did lxc-create and lxc-start * What was the outcome: lxc-start: No cgroup mounted on the system; lxc-start: failed to spawn ... * What you've expected: lxc-start: OK. lcx-checkconfig reports some missing components: --- Namespaces --- Namespaces: enabled Utsname namespace: enabled Ipc namespace: enabled Pid namespace: enabled User namespace: enabled Network namespace: enabled Multiple /dev/pts instances: enabled --- Control groups --- Cgroup: enabled Cgroup namespace: CONFIG_CGROUP_NSmissing ^^^^^^^ Cgroup device: enabled Cgroup sched: enabled Cgroup cpu account: enabled Cgroup memory controller: enabled Cgroup cpuset: enabled --- Misc --- Veth pair device: enabled Macvlan: enabled Vlan: enabled File capabilities: enabled -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/bronek-root ro quiet ** Not tainted ** Kernel log: [ 1.268111] cciss 0000:04:03.0: cciss0: <0x46> at PCI 0000:04:03.0 IRQ 19 using DAC [ 1.295566] cciss/c0d0: p1 p2 < p5 > [ 1.296193] scsi0 : cciss [ 1.336075] libata version 3.00 loaded. [ 1.336826] ata_piix 0000:00:1f.1: version 2.13 [ 1.336840] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 1.336847] ata_piix 0000:00:1f.1: can't derive routing for PCI INT A [ 1.336907] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 1.337425] scsi1 : ata_piix [ 1.337574] scsi2 : ata_piix [ 1.337660] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14 [ 1.337663] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15 [ 1.354255] e1000 0000:0a:01.0: eth1: (PCI-X:133MHz:64-bit) 00:0e:0c:b3:c8:0c [ 1.354267] e1000 0000:0a:01.0: eth1: Intel(R) PRO/1000 Network Connection [ 1.354300] e1000 0000:0a:01.1: PCI IRQ 98 -> rerouted to legacy IRQ 18 [ 1.366788] tg3 0000:03:01.1: eth2: Tigon3 [partno(N/A) rev 2100] (PCIX:133MHz:64-bit) MAC address 00:13:21:f1:98:c8 [ 1.366793] tg3 0000:03:01.1: eth2: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) [ 1.366797] tg3 0000:03:01.1: eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 1.366801] tg3 0000:03:01.1: eth2: dma_rwctrl[769f4000] dma_mask[64-bit] [ 1.500301] ata1.00: ATAPI: CD-224E, 9.9A, max MWDMA2 [ 1.516188] ata1.00: configured for MWDMA2 [ 1.518567] scsi 1:0:0:0: CD-ROM TEAC CD-224E 9.9A PQ: 0 ANSI: 5 [ 1.528605] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 1.528612] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.528914] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.532694] sr 1:0:0:0: Attached scsi generic sg0 type 5 [ 1.662086] e1000 0000:0a:01.1: eth3: (PCI-X:133MHz:64-bit) 00:0e:0c:b3:c8:0d [ 1.662095] e1000 0000:0a:01.1: eth3: Intel(R) PRO/1000 Network Connection [ 1.696033] Refined TSC clocksource calibration: 3600.127 MHz. [ 1.696041] Switching to clocksource tsc [ 4.096034] floppy0: no floppy controllers found [ 4.490356] device-mapper: uevent: version 1.0.3 [ 4.490513] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 5.112066] PM: Starting manual resume from disk [ 5.112073] PM: Hibernation image partition 254:1 present [ 5.112076] PM: Looking for hibernation image. [ 5.127116] PM: Image not found (code -22) [ 5.127120] PM: Hibernation image not present or could not be loaded. [ 7.066583] udevd[325]: starting version 175 [ 7.367739] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.392084] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 7.392100] ACPI: Power Button [PWRF] [ 7.510939] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 7.594905] Floppy drive(s): fd0 is 1.44M [ 7.604970] udevd[348]: renamed network interface eth2 to rename4 [ 7.620842] udevd[341]: renamed network interface eth1 to eth2 [ 7.696801] udevd[348]: renamed network interface rename4 to eth1 [ 7.787765] hpwdt 0000:01:04.0: This server does not have an iLO2+ ASIC. [ 7.793807] EDAC MC: Ver: 2.1.0 [ 7.983508] Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden [ 7.992558] Error: Driver 'pcspkr' is already registered, aborting... [ 8.105060] intel_rng: FWH not detected [ 8.156460] iTCO_vendor_support: vendor-support=0 [ 8.175934] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 8.176145] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 8.339831] psmouse serio1: bad data from KBC - timeout [ 8.364916] psmouse serio1: bad data from KBC - timeout [ 8.390003] psmouse serio1: bad data from KBC - timeout [ 8.415076] psmouse serio1: bad data from KBC - timeout [ 8.950310] psmouse serio1: bad data from KBC - timeout [ 8.975385] psmouse serio1: bad data from KBC - timeout [ 9.000468] psmouse serio1: bad data from KBC - timeout [ 9.535712] psmouse serio1: bad data from KBC - timeout [ 9.560783] psmouse serio1: bad data from KBC - timeout [ 9.585861] psmouse serio1: bad data from KBC - timeout [ 10.156144] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input3 [ 10.171622] psmouse serio1: Failed to enable mouse on isa0060/serio1 [ 10.616038] floppy0: no floppy controllers found [ 11.947679] loop: module loaded [ 13.522394] Adding 2895868k swap on /dev/mapper/bronek-swap_1. Priority:-1 extents:1 across:2895868k [ 14.532334] JFS: nTxBlock = 8192, nTxLock = 65536 [ 17.121049] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 17.124455] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 17.125156] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 17.850067] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.891712] tg3 0000:03:01.1: firmware: agent loaded tigon/tg3_tso.bin into memory [ 18.261249] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 18.264616] ADDRCONF(NETDEV_UP): eth3: link is not ready [ 18.337415] RPC: Registered named UNIX socket transport module. [ 18.337422] RPC: Registered udp transport module. [ 18.337425] RPC: Registered tcp transport module. [ 18.337428] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 18.401988] FS-Cache: Loaded [ 18.480799] FS-Cache: Netfs 'nfs' registered for caching [ 18.525854] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 19.991682] tg3 0000:03:01.1: eth1: Link is up at 100 Mbps, full duplex [ 19.991688] tg3 0000:03:01.1: eth1: Flow control is off for TX and off for RX [ 19.992283] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 20.259585] tg3 0000:03:01.0: eth0: Link is up at 1000 Mbps, full duplex [ 20.259592] tg3 0000:03:01.0: eth0: Flow control is off for TX and off for RX [ 20.260266] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 22.982558] Ebtables v2.0 registered [ 23.399390] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.727357] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 28.128013] eth2: no IPv6 routers present [ 30.024010] eth1: no IPv6 routers present [ 30.304009] eth0: no IPv6 routers present [ 33.358431] postgres (2510): /proc/2510/oom_adj is deprecated, please use /proc/2510/oom_score_adj instead. [ 37.461324] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 56.043063] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4 ** Model information sys_vendor: HP product_name: ProLiant DL380 G4 product_version: chassis_vendor: HP chassis_version: bios_vendor: HP bios_version: P51 ** Loaded modules: xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ip6table_filter ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc jfs loop iTCO_wdt iTCO_vendor_support e752x_edac rng_core snd_pcm snd_page_alloc psmouse edac_core hpwdt evdev hpilo snd_timer snd soundcore serio_raw pcspkr container button shpchp processor ext2 mbcache dm_mod sg sr_mod cdrom ata_generic ata_piix libata cciss scsi_mod uhci_hcd e1000 thermal thermal_sys ehci_hcd tg3 libphy usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation E7520 Memory Controller Hub [8086:3590] (rev 0c) Subsystem: Compaq Computer Corporation Device [0e11:3200] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:02.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI Express Port A [8086:3595] (rev 0c) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=04, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: fdd00000-fdefffff Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:06.0 PCI bridge [0604]: Intel Corporation E7520 PCI Express Port C [8086:3599] (rev 0c) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation Device [0e11:3201] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 3000 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation Device [0e11:3201] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 3020 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation Device [0e11:3201] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 3040 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI]) Subsystem: Compaq Computer Corporation Device [0e11:3201] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 3060 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI]) Subsystem: Compaq Computer Corporation Device [0e11:3201] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at fbef0000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00001000-00002fff Memory behind bridge: fbf00000-fcffffff Prefetchable memory behind bridge: f0200000-f02fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Compaq Computer Corporation Device [0e11:3201] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 255 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 0500 [size=16] Region 5: Memory at f0300000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix 01:03.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Rage XL [1002:4752] (rev 27) (prog-if 00 [VGA controller]) Subsystem: Compaq Computer Corporation Proliant Rage XL [0e11:001e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 64 bytes Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at 2000 [size=256] Region 2: Memory at fbff0000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at f0200000 [disabled] [size=128K] Capabilities: <access denied> 01:04.0 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Controller [0e11:b203] (rev 01) Subsystem: Compaq Computer Corporation Device [0e11:b206] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 7 Region 0: I/O ports at 1800 [size=256] Region 1: Memory at fbfe0000 (32-bit, non-prefetchable) [size=512] Capabilities: <access denied> 01:04.2 System peripheral [0880]: Compaq Computer Corporation Integrated Lights Out Processor [0e11:b204] (rev 01) Subsystem: Compaq Computer Corporation Device [0e11:b206] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 22 Region 0: I/O ports at 2400 [size=256] Region 1: Memory at fbfd0000 (32-bit, non-prefetchable) [size=2K] Region 2: Memory at fbfc0000 (32-bit, non-prefetchable) [size=8K] Region 3: Memory at fbf00000 (32-bit, non-prefetchable) [size=512K] [virtual] Expansion ROM at f0220000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: hpilo 02:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=02, secondary=03, subordinate=03, sec-latency=64 Memory behind bridge: fdd00000-fddfffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 02:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=02, secondary=04, subordinate=04, sec-latency=64 I/O behind bridge: 00004000-00004fff Memory behind bridge: fde00000-fdefffff Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 03:01.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet [14e4:1648] (rev 10) Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter (PCI-X, 10,100,1000-T) [0e11:00d0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fddf0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 03:01.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet [14e4:1648] (rev 10) Subsystem: Compaq Computer Corporation NC7782 Gigabit Server Adapter (PCI-X, 10,100,1000-T) [0e11:00d0] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (16000ns min), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 18 Region 0: Memory at fdde0000 (64-bit, non-prefetchable) [size=64K] Expansion ROM at <ignored> [disabled] Capabilities: <access denied> Kernel driver in use: tg3 04:03.0 RAID bus controller [0104]: Compaq Computer Corporation Smart Array 64xx [0e11:0046] (rev 01) Subsystem: Compaq Computer Corporation Smart Array 6i [0e11:4091] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fdef0000 (64-bit, non-prefetchable) [size=8K] Region 2: I/O ports at 4000 [size=256] Region 3: Memory at fde80000 (64-bit, non-prefetchable) [size=256K] [virtual] Expansion ROM at f0000000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: cciss 05:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=05, secondary=06, subordinate=09, sec-latency=64 Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 05:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=05, secondary=0a, subordinate=0c, sec-latency=64 I/O behind bridge: 00005000-00005fff Memory behind bridge: fdf00000-fdffffff Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 0a:01.0 Ethernet controller [0200]: Intel Corporation 82546GB Gigabit Ethernet Controller [8086:1079] (rev 03) Subsystem: Intel Corporation Device [8086:118a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fdfe0000 (64-bit, non-prefetchable) [size=128K] Region 2: Memory at fdf80000 (64-bit, non-prefetchable) [size=256K] Region 4: I/O ports at 5000 [size=64] [virtual] Expansion ROM at f0100000 [disabled] [size=256K] Capabilities: <access denied> Kernel driver in use: e1000 0a:01.1 Ethernet controller [0200]: Intel Corporation 82546GB Gigabit Ethernet Controller [8086:1079] (rev 03) Subsystem: Intel Corporation Device [8086:118a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 18 Region 0: Memory at fdf60000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at 5040 [size=64] Capabilities: <access denied> Kernel driver in use: e1000 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 7.0 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109.1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.2.0-4-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u1 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.36+wheezy.1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: * linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--- End Message ---
--- Begin Message ---
- To: 710004-done@bugs.debian.org
- Subject: Re: Bug#710004: linux-image-3.2.0-4-amd64: lxc-checkcopnfig reports missing CONFIG_CGROUP_NS
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Mon, 27 May 2013 16:23:10 +0100
- Message-id: <1369668190.3469.363.camel@deadeye.wl.decadent.org.uk>
- In-reply-to: <[🔎] 20130527122659.3678.61356.reportbug@bronek.ztk-rp.eu>
- References: <[🔎] 20130527122659.3678.61356.reportbug@bronek.ztk-rp.eu>
On Mon, 2013-05-27 at 14:26 +0200, Rafal Pietrak wrote: > Package: src:linux > Version: 3.2.41-2+deb7u2 > Severity: important > > > * This is a "clean upgraded" Debian, from recent Debian-6 installation > * since OpenVZ is missing, I've installed LXC packages, did lxc-create > and lxc-start > * What was the outcome: > lxc-start: No cgroup mounted on the system; lxc-start: failed to spawn ... So read the documentation about how to mount cgroups. > * What you've expected: > lxc-start: OK. > > lcx-checkconfig reports some missing components: > --- Namespaces --- > Namespaces: enabled > Utsname namespace: enabled > Ipc namespace: enabled > Pid namespace: enabled > User namespace: enabled > Network namespace: enabled > Multiple /dev/pts instances: enabled > > --- Control groups --- > Cgroup: enabled > Cgroup namespace: CONFIG_CGROUP_NSmissing > ^^^^^^^ [...] There is no such config symbol. I have no idea why this is being checked for, but it's not a kernel bug. Ben. -- Ben Hutchings Experience is what causes a person to make new mistakes instead of old ones.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---