Bug#658142: linux-image-2.6.32-5-amd64: kernel oops in __mark_inode_dirty
Package: linux-2.6
Version: 2.6.32-41
Severity: normal
I got the following with the kernel from 6.0.3 (the last boot before
upgrading to 6.0.4):
Jan 31 14:16:33 snowbell kernel: [ 34.117665] ------------[ cut here
]------------
Jan 31 14:16:33 snowbell kernel: [ 34.117686] WARNING: at
/tmp/buildd/linux-2.6-2.6.32/debian/build/source_amd64_none/fs/fs-writeback.c:1122
__mark_inode_dirty+0xe7/0x14a()
Jan 31 14:16:33 snowbell kernel: [ 34.117696] Hardware name: 1005PE
Jan 31 14:16:33 snowbell kernel: [ 34.117701] Modules linked in:
loop(+) snd_hda_codec_realtek joydev arc4 ecb snd_hda_intel ath9k
snd_hda_codec mac80211 snd_hwdep ath uvcvideo i915 snd_pcm videodev
snd_seq drm_kms_helper snd_timer v4l1_compat cfg80211 drm
snd_seq_device v4l2_compat_ioctl32 eeepc_laptop rfkill i2c_algo_bit
snd psmouse pci_hotplug i2c_core led_class serio_raw wmi evdev
soundcore video output battery processor snd_page_alloc ac button ext3
jbd mbcache sha256_generic aes_x86_64 aes_generic cbc dm_crypt dm_mod
sd_mod crc_t10dif ahci libata uhci_hcd thermal atl1c ehci_hcd scsi_mod
usbcore nls_base thermal_sys [last unloaded: scsi_wait_scan]
Jan 31 14:16:33 snowbell kernel: [ 34.117837] Pid: 831, comm:
udisks-part-id Not tainted 2.6.32-5-amd64 #1
Jan 31 14:16:33 snowbell kernel: [ 34.117843] Call Trace:
Jan 31 14:16:33 snowbell kernel: [ 34.117857] [<ffffffff8110872f>]
? __mark_inode_dirty+0xe7/0x14a
Jan 31 14:16:33 snowbell kernel: [ 34.117868] [<ffffffff8110872f>]
? __mark_inode_dirty+0xe7/0x14a
Jan 31 14:16:33 snowbell kernel: [ 34.117878] [<ffffffff8104df9c>]
? warn_slowpath_common+0x77/0xa3
Jan 31 14:16:33 snowbell kernel: [ 34.117890] [<ffffffff8110872f>]
? __mark_inode_dirty+0xe7/0x14a
Jan 31 14:16:33 snowbell kernel: [ 34.117901] [<ffffffff810ffc78>]
? touch_atime+0xfe/0x127
Jan 31 14:16:33 snowbell kernel: [ 34.117912] [<ffffffff810b5a4d>]
? generic_file_aio_read+0x499/0x536
Jan 31 14:16:33 snowbell kernel: [ 34.117926] [<ffffffff810eed05>]
? do_sync_read+0xce/0x113
Jan 31 14:16:33 snowbell kernel: [ 34.117938] [<ffffffff81064f92>]
? autoremove_wake_function+0x0/0x2e
Jan 31 14:16:33 snowbell kernel: [ 34.117950] [<ffffffff810ccd36>]
? handle_mm_fault+0x3b8/0x80f
Jan 31 14:16:33 snowbell kernel: [ 34.117961] [<ffffffff810ef728>]
? vfs_read+0xa6/0xff
Jan 31 14:16:33 snowbell kernel: [ 34.117971] [<ffffffff810ef83d>]
? sys_read+0x45/0x6e
Jan 31 14:16:33 snowbell kernel: [ 34.117981] [<ffffffff81010b42>]
? system_call_fastpath+0x16/0x1b
Jan 31 14:16:33 snowbell kernel: [ 34.117989] ---[ end trace
5132e90d34f21d4f ]---
It's the first time I see this in 2+ years since I have the netbook
(Asus EeePC 1005PE). e2fsck found nothing bad, but I didn't run
badblocks yet. The S.M.A.R.T. status is ok (smartctl -A /dev/sda), and I
ran a short and a long selftest with smartctl, which found nothing
wrong. Any ideas?
Thanks,
Laurentiu
P.S. kerneloops.org seems to be down.
-- Package-specific info:
<#part type="text/plain" disposition=attachment description="Bug script output">
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-41) (ben@decadent.org.uk)
(gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 16:22:28 UTC
2012
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64
root=/dev/mapper/VG_snowbell-LV_root ro acpi_osi=Linux quiet
** Not tainted
** Kernel log:
[ 46.927231] Bluetooth: RFCOMM ver 1.11
[ 47.118454] Bridge firewalling registered
[ 47.225327] Bluetooth: SCO (Voice Link) ver 0.6
[ 47.225334] Bluetooth: SCO socket layer initialized
[ 48.041185] lp: driver loaded but no devices found
[ 48.173327] ppdev: user-space parallel port driver
[ 48.888742] composite sync not supported
[ 49.023887] composite sync not supported
[ 56.555634] composite sync not supported
[ 56.696334] composite sync not supported
[ 56.860854] composite sync not supported
[ 61.005980] CPU0 attaching NULL sched-domain.
[ 61.005995] CPU1 attaching NULL sched-domain.
[ 61.041291] CPU0 attaching sched-domain:
[ 61.041301] domain 0: span 0-1 level SIBLING
[ 61.041309] groups: group ffff88000180fae0 cpus 0 (cpu_power =
589) group ffff88000190fae0 cpus 1 (cpu_power = 589)
[ 61.041330] domain 1: span 0-1 level MC
[ 61.041336] groups: group ffff88000180fbf0 cpus 0-1 (cpu_power = 1178)
[ 61.041355] CPU1 attaching sched-domain:
[ 61.041361] domain 0: span 0-1 level SIBLING
[ 61.041367] groups: group ffff88000190fae0 cpus 1 (cpu_power =
589) group ffff88000180fae0 cpus 0 (cpu_power = 589)
[ 61.041386] domain 1: span 0-1 level MC
[ 61.041392] groups: group ffff88000180fbf0 cpus 0-1 (cpu_power = 1178)
[ 76.950564] composite sync not supported
[ 77.098252] composite sync not supported
[ 77.238569] composite sync not supported
[ 80.440837] composite sync not supported
[ 85.635281] wlan0: direct probe to AP e0:46:9a:09:7d:fc (try 1)
[ 85.643985] wlan0: direct probe responded
[ 85.643996] wlan0: authenticate with AP e0:46:9a:09:7d:fc (try 1)
[ 85.649228] wlan0: authenticated
[ 85.649288] wlan0: associate with AP e0:46:9a:09:7d:fc (try 1)
[ 85.655469] wlan0: RX AssocResp from e0:46:9a:09:7d:fc (capab=0x431
status=0 aid=1)
[ 85.655479] wlan0: associated
[ 85.656461] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 85.656622] cfg80211: Calling CRDA for country: DE
[ 96.457032] wlan0: no IPv6 routers present
[ 1467.774718] composite sync not supported
[ 1987.754712] composite sync not supported
[ 1987.887744] composite sync not supported
[ 1990.502195] composite sync not supported
[ 1990.642567] composite sync not supported
[ 1990.782680] composite sync not supported
[ 1992.138861] CPU0 attaching NULL sched-domain.
[ 1992.138876] CPU1 attaching NULL sched-domain.
[ 1992.165263] CPU0 attaching sched-domain:
[ 1992.165274] domain 0: span 0-1 level SIBLING
[ 1992.165282] groups: group ffff88000180fae0 cpus 0 (cpu_power =
589) group ffff88000190fae0 cpus 1 (cpu_power = 589)
[ 1992.165304] domain 1: span 0-1 level MC
[ 1992.165310] groups: group ffff88000180fbf0 cpus 0-1 (cpu_power = 1178)
[ 1992.165329] CPU1 attaching sched-domain:
[ 1992.165336] domain 0: span 0-1 level SIBLING
[ 1992.165342] groups: group ffff88000190fae0 cpus 1 (cpu_power =
589) group ffff88000180fae0 cpus 0 (cpu_power = 589)
[ 1992.165362] domain 1: span 0-1 level MC
[ 1992.165368] groups: group ffff88000180fbf0 cpus 0-1 (cpu_power = 1178)
[ 2008.811667] composite sync not supported
[ 2008.950585] composite sync not supported
[ 2009.086623] composite sync not supported
[ 2010.768109] composite sync not supported
[ 2544.510685] composite sync not supported
[ 2571.154788] composite sync not supported
[ 2571.287679] composite sync not supported
[ 2574.595174] composite sync not supported
[ 2574.734682] composite sync not supported
[ 2574.878522] composite sync not supported
[ 3392.699567] composite sync not supported
[ 3402.999215] composite sync not supported
[ 3403.138638] composite sync not supported
[ 3403.282568] composite sync not supported
[ 3404.900076] composite sync not supported
[ 3417.083708] composite sync not supported
[ 3417.218764] composite sync not supported
[ 3419.714546] composite sync not supported
[ 3419.855702] composite sync not supported
[ 3419.994624] composite sync not supported
[ 3435.024078] wlan0: deauthenticating from e0:46:9a:09:7d:fc by local
choice (reason=3)
[ 3473.950619] composite sync not supported
[ 3506.191642] composite sync not supported
[ 3506.326618] composite sync not supported
[ 3508.806162] composite sync not supported
[ 3508.946589] composite sync not supported
[ 3509.082617] composite sync not supported
[ 3514.302519] composite sync not supported
[ 3525.532362] composite sync not supported
[ 3525.670770] composite sync not supported
[ 3525.810778] composite sync not supported
[ 3527.528076] composite sync not supported
[ 3530.540127] wlan0: direct probe to AP e0:46:9a:09:7d:fc (try 1)
[ 3530.546109] wlan0: direct probe responded
[ 3530.546121] wlan0: authenticate with AP e0:46:9a:09:7d:fc (try 1)
[ 3530.550150] wlan0: authenticated
[ 3530.550214] wlan0: associate with AP e0:46:9a:09:7d:fc (try 1)
[ 3530.559501] wlan0: RX AssocResp from e0:46:9a:09:7d:fc (capab=0x431
status=0 aid=1)
[ 3530.559511] wlan0: associated
[ 3681.174791] composite sync not supported
[ 4013.958809] composite sync not supported
[ 6571.627747] composite sync not supported
[ 7669.942573] composite sync not supported
[ 7973.442700] composite sync not supported
[ 8701.775570] composite sync not supported
** Model information
sys_vendor: ASUSTeK Computer INC.
product_name: 1005PE
product_version: x.x
chassis_vendor: ASUSTeK Computer INC.
chassis_version: x.x
bios_vendor: American Megatrends Inc.
bios_version: 1202
board_vendor: ASUSTeK Computer INC.
board_name: 1005P
board_version: x.xx
** Loaded modules:
Module Size Used by
acpi_cpufreq 5571 1
cpufreq_powersave 902 0
cpufreq_userspace 1992 0
cpufreq_stats 2740 0
cpufreq_conservative 5162 0
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
sco 7225 2
bridge 39646 0
stp 1440 1 bridge
rfcomm 29629 0
bnep 9427 2
l2cap 24752 4 rfcomm,bnep
crc16 1319 1 l2cap
bluetooth 41827 6 sco,rfcomm,bnep,l2cap
ext2 52905 1
loop 11799 0
snd_hda_codec_realtek 235698 1
arc4 1274 2
ecb 1841 2
joydev 8459 0
snd_hda_intel 20035 1
ath9k 249976 0
snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel
mac80211 137372 1 ath9k
ath 8006 1 ath9k
uvcvideo 52127 0
snd_hwdep 5380 1 snd_hda_codec
i915 256094 3
snd_pcm 60487 2 snd_hda_intel,snd_hda_codec
videodev 30041 1 uvcvideo
snd_seq 42881 0
drm_kms_helper 20369 1 i915
v4l1_compat 11442 2 uvcvideo,videodev
snd_timer 15598 2 snd_pcm,snd_seq
cfg80211 101496 3 ath9k,mac80211,ath
drm 142279 4 i915,drm_kms_helper
v4l2_compat_ioctl32 8474 1 videodev
eeepc_laptop 12992 0
snd_seq_device 4493 1 snd_seq
rfkill 13044 5 bluetooth,cfg80211,eeepc_laptop
i2c_algo_bit 4209 1 i915
psmouse 49937 0
snd 46526 10
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
i2c_core 15819 5 i915,videodev,drm_kms_helper,drm,i2c_algo_bit
serio_raw 3752 0
soundcore 4598 1 snd
video 17445 1 i915
wmi 4323 0
evdev 7352 25
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
led_class 2433 1 ath9k
output 1692 1 video
pci_hotplug 21587 1 eeepc_laptop
battery 4998 0
ac 2192 0
button 4650 1 i915
processor 29935 3 acpi_cpufreq
ext3 106710 5
jbd 37317 1 ext3
mbcache 5050 2 ext2,ext3
sha256_generic 8692 2
aes_x86_64 7340 4
aes_generic 25714 1 aes_x86_64
cbc 2539 1
dm_crypt 10664 1
dm_mod 53946 21 dm_crypt
sd_mod 29937 3
crc_t10dif 1276 1 sd_mod
ahci 32870 2
uhci_hcd 18521 0
libata 133776 1 ahci
thermal 11674 0
ehci_hcd 32097 0
scsi_mod 126725 2 sd_mod,libata
usbcore 123122 4 uvcvideo,uhci_hcd,ehci_hcd
nls_base 6377 1 usbcore
thermal_sys 11942 3 video,processor,thermal
atl1c 27315 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]
Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family
Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7d00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation N10 Family
Integrated Graphics Controller [8086:a012]
Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7e80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High
Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ce]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI
Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI
Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI
Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7f00000-f7ffffff
Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB
UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2
EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7cf7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC
Controller [8086:27bc] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA
AHCI Controller [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at d080 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at c880 [size=4]
Region 4: I/O ports at c800 [size=32]
Region 5: Memory at f7cf7800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus
Controller [8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 0400 [size=32]
01:00.0 Ethernet controller [0200]: Atheros Communications AR8132 Fast
Ethernet [1969:1062] (rev c0)
Subsystem: ASUSTeK Computer Inc. Device [1043:838a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f7fc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285
Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave Device [1a3b:1089]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 13d3:5111 IMC Networks Integrated Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
<#/part>
-- System Information:
Debian Release: 6.0.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-41 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
Reply to: