Bug#658164: linux-image-3.1.0-1-amd64: Baud rate of FTDI USB-to-serial converter not initialized
Package: linux-2.6
Version: 3.1.8-2
Severity: normal
Tags: upstream
Dear Maintainer,
When attaching a FT232RL USB-to-serial converter to the PC, the baud rate is not (or not always)
initialized correctly (sometimes, the bug only occurs after the device has been removed
from the USB port at least once).
To reproduce, attach the converter to the PC and measure the baud rate with an oscilloscope.
- Attach and check the baud rate with stty and the scope. (The rates might still match at this point)
- Detach from USB and attach again.
- Now, the baud rate reported by stty is still the standard value (500000 for me), but the converter
actually runs at about 3000000 baud.
- When setting the baud rate to 500000 again, nothing happens (the kernel probably thinks there is nothing to do)
- To get the device back into sync, you need to set the baud rate to something different (I tried 115200) and back again.
If the bug is not reproducible right away, leave the baud rate at 500000 and detach and attach the device
(the displayed baud rate should stay at 500000).
-- Package-specific info:
** Version:
Linux version 3.1.0-1-amd64 (Debian 3.1.8-2) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-11) ) #1 SMP Tue Jan 10 05:01:58 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64 root=UUID=***************[redacted] ro quiet
** Not tainted
** Kernel log:
[ 6.728549] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 6.728556] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.728558] [drm] Driver supports precise vblank timestamp query.
[ 6.728598] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.780140] fixme: max PWM is zero.
[ 7.253046] fbcon: inteldrmfb (fb0) is primary device
[ 7.483115] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
[ 7.531344] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
[ 7.811405] Console: switching to colour frame buffer device 160x50
[ 7.814614] fb0: inteldrmfb frame buffer device
[ 7.814615] drm: registered panic notifier
[ 7.904184] acpi device:06: registered as cooling_device2
[ 7.904513] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 7.904568] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.905169] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.905222] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 7.905287] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 7.905317] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 7.962743] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 7.972570] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 7.972641] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.681901] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 8.970907] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 9.059090] device-mapper: uevent: version 1.0.3
[ 9.059175] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[ 12.806451] Intel AES-NI instructions are not detected.
[ 12.839874] padlock_aes: VIA PadLock not detected.
[ 12.858616] padlock_sha: VIA PadLock Hash Engine not detected.
[ 13.275779] loop: module loaded
[ 13.769092] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 14.650395] RPC: Registered named UNIX socket transport module.
[ 14.650398] RPC: Registered udp transport module.
[ 14.650400] RPC: Registered tcp transport module.
[ 14.650402] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.720208] FS-Cache: Loaded
[ 14.754686] FS-Cache: Netfs 'nfs' registered for caching
[ 14.806812] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 15.260907] fuse init (API version 7.17)
[ 16.733660] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 18.017832] r8169 0000:08:00.0: eth0: link down
[ 18.018443] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.476272] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 22.179243] Bluetooth: Core ver 2.16
[ 22.179272] NET: Registered protocol family 31
[ 22.179274] Bluetooth: HCI device and connection manager initialized
[ 22.179277] Bluetooth: HCI socket layer initialized
[ 22.179278] Bluetooth: L2CAP socket layer initialized
[ 22.179284] Bluetooth: SCO socket layer initialized
[ 22.207392] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.207396] Bluetooth: BNEP filters: protocol multicast
[ 22.219714] Bluetooth: RFCOMM TTY layer initialized
[ 22.219719] Bluetooth: RFCOMM socket layer initialized
[ 22.219720] Bluetooth: RFCOMM ver 1.11
[ 24.142734] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.438838] lp: driver loaded but no devices found
[ 24.533917] ppdev: user-space parallel port driver
[ 27.776294] wlan0: authenticate with xx:xx:xx:xx:xx:xx[redacted] (try 1)
[ 27.779237] wlan0: authenticated
[ 27.800387] wlan0: associate with xx:xx:xx:xx:xx:xx (try 1)
[ 27.804421] wlan0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x411 status=0 aid=5)
[ 27.804425] wlan0: associated
[ 27.805988] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 40.237321] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 40.405877] EXT4-fs (dm-0): re-mounted. Opts: commit=0
[ 99.320289] usb 6-1: new full speed USB device number 2 using uhci_hcd
[ 99.513831] usb 6-1: New USB device found, idVendor=0403, idProduct=6001
[ 99.513840] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 99.513847] usb 6-1: Product: FT232R USB UART
[ 99.513852] usb 6-1: Manufacturer: FTDI
[ 99.513856] usb 6-1: SerialNumber: A100UJBV
[ 99.616898] usbcore: registered new interface driver usbserial
[ 99.616917] USB Serial support registered for generic
[ 99.616953] usbcore: registered new interface driver usbserial_generic
[ 99.616955] usbserial: USB Serial Driver core
[ 99.624805] USB Serial support registered for FTDI USB Serial Device
[ 99.624875] ftdi_sio 6-1:1.0: FTDI USB Serial Device converter detected
[ 99.624906] usb 6-1: Detected FT232RL
[ 99.624908] usb 6-1: Number of endpoints 2
[ 99.624910] usb 6-1: Endpoint 1 MaxPacketSize 64
[ 99.624912] usb 6-1: Endpoint 2 MaxPacketSize 64
[ 99.624914] usb 6-1: Setting MaxPacketSize 64
[ 99.627705] usb 6-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 99.627724] usbcore: registered new interface driver ftdi_sio
[ 99.627727] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[ 308.664351] usb 6-1: USB disconnect, device number 2
[ 308.664773] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 308.664817] ftdi_sio 6-1:1.0: device disconnected
[ 310.392311] usb 6-1: new full speed USB device number 3 using uhci_hcd
[ 310.585874] usb 6-1: New USB device found, idVendor=0403, idProduct=6001
[ 310.585883] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 310.585890] usb 6-1: Product: FT232R USB UART
[ 310.585895] usb 6-1: Manufacturer: FTDI
[ 310.585900] usb 6-1: SerialNumber: A100UJBV
[ 310.592998] ftdi_sio 6-1:1.0: FTDI USB Serial Device converter detected
[ 310.593084] usb 6-1: Detected FT232RL
[ 310.593090] usb 6-1: Number of endpoints 2
[ 310.593095] usb 6-1: Endpoint 1 MaxPacketSize 64
[ 310.593100] usb 6-1: Endpoint 2 MaxPacketSize 64
[ 310.593106] usb 6-1: Setting MaxPacketSize 64
[ 310.594844] usb 6-1: FTDI USB Serial Device converter now attached to ttyUSB0
** Model information
sys_vendor: Dell Inc.
product_name: Vostro 1320
product_version: Null
chassis_vendor: Dell Inc.
chassis_version: N/A
bios_vendor: Dell Inc.
bios_version: A08
board_vendor: Dell Inc.
board_name: GRA31P
board_version:
** Loaded modules:
ftdi_sio
usbserial
parport_pc
ppdev
lp
parport
rfcomm
bnep
bluetooth
acpi_cpufreq
mperf
cpufreq_stats
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
uinput
fuse
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
loop
sha256_generic
cryptd
aes_x86_64
aes_generic
cbc
dm_crypt
dm_mod
snd_hda_codec_idt
joydev
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_seq_midi
snd_rawmidi
snd_seq_midi_event
snd_seq
i915
drm_kms_helper
drm
i2c_algo_bit
psmouse
arc4
snd_timer
snd_seq_device
b43
uvcvideo
videodev
mac80211
iTCO_wdt
media
dell_laptop
v4l2_compat_ioctl32
dcdbas
evdev
pcspkr
snd
i2c_i801
i2c_core
serio_raw
cfg80211
iTCO_vendor_support
battery
video
processor
ac
rfkill
bcma
button
rng_core
soundcore
power_supply
snd_page_alloc
thermal_sys
ext4
mbcache
jbd2
crc16
sr_mod
cdrom
sd_mod
crc_t10dif
uhci_hcd
ahci
libahci
libata
scsi_mod
ehci_hcd
r8169
mii
ssb
mmc_core
pcmcia
pcmcia_core
usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:02bb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:02bb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Dell Device [1028:02bb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f6100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02bb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02bb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02bb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:02bb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 0: Memory at f6804800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Dell Device [1028:02bb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f6800000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c0600000-c0afffff
Prefetchable memory behind bridge: 00000000f6000000-00000000f60fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0e, subordinate=0f, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=14, subordinate=15, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f5ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: c0200000-c03fffff
Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02bb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02bb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02bb]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:02bb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f6804c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=26, subordinate=26, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
Subsystem: Dell Device [1028:02bb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:02bb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 46
Region 0: I/O ports at 1818 [size=8]
Region 1: I/O ports at 180c [size=4]
Region 2: I/O ports at 1810 [size=8]
Region 3: I/O ports at 1808 [size=4]
Region 4: I/O ports at 18e0 [size=32]
Region 5: Memory at f6804000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Dell Device [1028:02bb]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at c0100000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]
Kernel driver in use: i801_smbus
08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Dell Device [1028:02bb]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at f6004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f6000000 (64-bit, prefetchable) [size=16K]
[virtual] Expansion ROM at f6020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
0e:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0c45:63e0 Microdia Sonix Integrated Webcam
Bus 006 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.1.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.1.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.1.0-1-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.1.0-1-amd64 suggests:
pn grub-pc 1.99-14
pn linux-doc-3.1 <none>
Versions of packages linux-image-3.1.0-1-amd64 is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-linux 0.34
pn firmware-linux-nonfree 0.34
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn xen-hypervisor <none>
-- debconf information:
* linux-image-3.1.0-1-amd64/postinst/missing-firmware-3.1.0-1-amd64:
linux-image-3.1.0-1-amd64/postinst/ignoring-ramdisk:
linux-image-3.1.0-1-amd64/postinst/depmod-error-initrd-3.1.0-1-amd64: false
linux-image-3.1.0-1-amd64/prerm/removing-running-kernel-3.1.0-1-amd64: true
Reply to: