Bug#641176: xserver-xorg-video-radeon: Radeon 9200SE, Detected VRAM RAM=0M, BAR=0M

[Tomi Leppänen <tomppeli12@gmail.com>]

ke, 2011-09-21 kello 18:29 -0500, Jonathan Nieder kirjoitti:
> Tomi Leppänen wrote:
> 
> > Didn't make any difference. Here is dmesg now:
> [...]
> > [    0.144739] pci 0000:01:00.0: BAR 0: trying firmware assignment [mem 0xd0000000-0xdfffffff pref]
> > [    0.144764] pci 0000:01:00.0: BAR 0: [mem 0xd0000000-0xdfffffff pref] conflicts with PCI Bus 0000:00 [mem 0x20000000-0xffefffff]
> > [    0.144784] pci 0000:01:00.0: BAR 0: can't assign mem pref (size 0x10000000)
> 
> Thanks, Tomi.  If you still have time to work on this, please report
> it upstream to linux-pci@vger.kernel.org (no subscription needed,
> since the convention is to always reply-to-all there) and either cc us
> or let us know the Message-ID so we can follow the resulting
> discussion.
What subject should I use?

> Upstream will probably want to know a few things (so it can be good to
> use a few attachments):
> 
>  - which versions you have tested and what happened with each
>  - "dmesg" output from a recent (ideally a mainline kernel or 3.1-rc4
>    from experimental) right after boot, just like you sent here
You mean that I should try with Debian experimental kernel? This guide
is probably correct to install it:
http://wiki.debian.org/DebianExperimental

>  - "lspci -vvx" or even "lspci -vvxxx" output (see the lspci manpage
>    for a warning about the latter)
So my biggest worry with -xxx is that my computer may crash? With this test setup it shouldn't be any problem.

> Thanks and good luck,
> Jonathan