Bug#641176: xserver-xorg-video-radeon: Radeon 9200SE, Detected VRAM RAM=0M, BAR=0M
pe, 2011-09-16 kello 15:43 -0500, Jonathan Nieder kirjoitti:
> Hi Tomi,
>
> Tomi Leppänen wrote:
>
> > [ 0.073485] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
>
> I was hoping it would be that. Does adding pci=use_crs to the kernel
> command line help?
>
> Thanks,
> Jonathan
Didn't make any difference. Here is dmesg now:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-1-486 (Debian 3.0.0-3)
(ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-8) ) #1 Sat Aug
27 15:56:48 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI
data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000
(reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.1 present.
[ 0.000000] DMI: /i440BX-8671, BIOS 4.51 PG 02/06/01
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-F7FFF uncachable
[ 0.000000] F8000-FBFFF write-through
[ 0.000000] FC000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[ 0.000000] init_memory_mapping: 0000000000000000-000000001fff0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001fc00000 page 2M
[ 0.000000] 001fc00000 - 001fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1fff0000 @
17fb000-1800000
[ 0.000000] RAMDISK: 1777b000 - 18034000
[ 0.000000] ACPI: RSDP 000f6ee0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 1fff3000 00028 (v01 GBT AWRDACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: FACP 1fff3040 00074 (v01 GBT AWRDACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: DSDT 1fff30c0 02629 (v01 GBT AWRDACPI 00001000
MSFT 0100000C)
[ 0.000000] ACPI: FACS 1fff0000 00040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fff0000
[ 0.000000] low ram: 0 - 1fff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001fff0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001fff0
[ 0.000000] On node 0 totalpages: 130943
[ 0.000000] free_area_init_node: node 0, pgdat c13b2ae8, node_mem_map
dfbef200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125968 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
20000000:dfff0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 129919
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-486
root=UUID=7f4075cc-5b16-4fe4-a51b-ee8f697feac1 ro quiet pci=use_crs
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 505500k/524224k available (2519k kernel code,
18272k reserved, 1296k data, 444k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 0.000000] .init : 0xc13ba000 - 0xc1429000 ( 444 kB)
[ 0.000000] .data : 0xc1275d6c - 0xc13b9e80 (1296 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1275d6c (2519 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] NR_IRQS:288
[ 0.000000] CPU 0 irqstacks, hard=df406000 soft=df408000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 749.921 MHz processor.
[ 0.012011] Calibrating delay loop (skipped), value calculated using
timer frequency.. 1499.84 BogoMIPS (lpj=2999684)
[ 0.012033] pid_max: default: 32768 minimum: 301
[ 0.012189] Security Framework initialized
[ 0.012212] SELinux: Disabled at boot.
[ 0.012266] Mount-cache hash table entries: 512
[ 0.012645] Initializing cgroup subsys cpuacct
[ 0.012681] Initializing cgroup subsys memory
[ 0.012723] Initializing cgroup subsys devices
[ 0.012734] Initializing cgroup subsys freezer
[ 0.012744] Initializing cgroup subsys net_cls
[ 0.012755] Initializing cgroup subsys blkio
[ 0.012888] CPU: Centaur VIA Nehemiah stepping 04
[ 0.013992] ACPI: Core revision 20110413
[ 0.015353] ACPI Warning: Detected an unsupported executable opcode
at module-level: [0x0070] at table offset 0x0A6D (20110413/psloop-526)
[ 0.015392] ACPI Warning: Detected an unsupported executable opcode
at module-level: [0x0070] at table offset 0x0A76 (20110413/psloop-526)
[ 0.019443] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.020287] Performance Events:
[ 0.021196] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.021608] devtmpfs: initialized
[ 0.022114] PM: Registering ACPI NVS region at 1fff0000 (12288 bytes)
[ 0.022770] print_constraints: dummy:
[ 0.022957] NET: Registered protocol family 16
[ 0.023337] EISA bus registered
[ 0.023368] ACPI: bus type pci registered
[ 0.054044] PCI: PCI BIOS revision 2.10 entry at 0xfb020, last bus=1
[ 0.054056] PCI: Using configuration type 1 for base access
[ 0.056224] bio: create slab <bio-0> at 0
[ 0.057938] ACPI: EC: Look up EC in DSDT
[ 0.064158] ACPI: Interpreter enabled
[ 0.064177] ACPI: (supports S0 S1 S4 S5)
[ 0.064258] ACPI: Using PIC for interrupt routing
[ 0.076519] ACPI: Power Resource [PFAN] (on)
[ 0.077520] ACPI: No dock devices found.
[ 0.077532] HEST: Table not found.
[ 0.077549] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.077889] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.078573] pci_root PNP0A03:00: host bridge window [io
0x0000-0x0cf7]
[ 0.078590] pci_root PNP0A03:00: host bridge window [io
0x0d00-0x3fff]
[ 0.078605] pci_root PNP0A03:00: host bridge window [io
0x4042-0x4fff]
[ 0.078620] pci_root PNP0A03:00: host bridge window [io
0x5010-0xffff]
[ 0.078636] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000ccfff]
[ 0.078653] pci_root PNP0A03:00: host bridge window [mem
0x20000000-0xffefffff]
[ 0.078717] pci 0000:00:00.0: [8086:7190] type 0 class 0x000600
[ 0.078746] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xebffffff
pref]
[ 0.078841] pci 0000:00:01.0: [8086:7191] type 1 class 0x000604
[ 0.078921] pci 0000:00:07.0: [8086:7110] type 0 class 0x000601
[ 0.079038] pci 0000:00:07.1: [8086:7111] type 0 class 0x000101
[ 0.079104] pci 0000:00:07.1: reg 20: [io 0xf000-0xf00f]
[ 0.079173] pci 0000:00:07.2: [8086:7112] type 0 class 0x000c03
[ 0.079239] pci 0000:00:07.2: reg 20: [io 0xa000-0xa01f]
[ 0.079306] pci 0000:00:07.3: [8086:7113] type 0 class 0x000680
[ 0.079322] * Found PM-Timer Bug on the chipset. Due to workarounds
for a bug,
[ 0.079330] * this clock source is slow. Consider trying other clock
sources
[ 0.079423] pci 0000:00:07.3: no compatible bridge window for [io
0x4000-0x403f]
[ 0.079442] pci 0000:00:07.3: no compatible bridge window for [io
0x5000-0x500f]
[ 0.079506] pci 0000:00:09.0: [13f6:0111] type 0 class 0x000401
[ 0.079538] pci 0000:00:09.0: reg 10: [io 0xa400-0xa4ff]
[ 0.079624] pci 0000:00:09.0: supports D1 D2
[ 0.079668] pci 0000:00:0a.0: [1317:0985] type 0 class 0x000200
[ 0.079699] pci 0000:00:0a.0: reg 10: [io 0xa800-0xa8ff]
[ 0.079723] pci 0000:00:0a.0: reg 14: [mem 0xf0000000-0xf00003ff]
[ 0.079782] pci 0000:00:0a.0: reg 30: [mem 0xee000000-0xee01ffff
pref]
[ 0.079815] pci 0000:00:0a.0: supports D1 D2
[ 0.079828] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.079844] pci 0000:00:0a.0: PME# disabled
[ 0.079895] pci 0000:00:0b.0: [1106:3249] type 0 class 0x000104
[ 0.079928] pci 0000:00:0b.0: reg 10: [io 0xac00-0xac0f]
[ 0.079951] pci 0000:00:0b.0: reg 14: [io 0xb000-0xb00f]
[ 0.079974] pci 0000:00:0b.0: reg 18: [io 0xb400-0xb40f]
[ 0.080031] pci 0000:00:0b.0: reg 1c: [io 0xb800-0xb80f]
[ 0.080054] pci 0000:00:0b.0: reg 20: [io 0xbc00-0xbc1f]
[ 0.080077] pci 0000:00:0b.0: reg 24: [io 0xc000-0xc0ff]
[ 0.080101] pci 0000:00:0b.0: reg 30: [mem 0xef000000-0xef00ffff
pref]
[ 0.080217] pci 0000:01:00.0: [1002:5964] type 0 class 0x000300
[ 0.080251] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff
pref]
[ 0.080274] pci 0000:01:00.0: reg 14: [io 0x9000-0x90ff]
[ 0.080297] pci 0000:01:00.0: reg 18: [mem 0xed000000-0xed00ffff]
[ 0.080343] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff
pref]
[ 0.080381] pci 0000:01:00.0: supports D1 D2
[ 0.080442] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.080458] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.080475] pci 0000:00:01.0: bridge window [mem
0xec000000-0xedffffff]
[ 0.080494] pci 0000:00:01.0: bridge window [mem
0xd8000000-0xe7ffffff pref]
[ 0.080516] pci_bus 0000:00: on NUMA node 0
[ 0.080534] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.081061] pci0000:00: Unable to request _OSC control (_OSC support
mask: 0x1e)
[ 0.084442] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.084642] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 0.084837] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12
14 15) *9
[ 0.085033] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.085427] vgaarb: device added: PCI:0000:01:00.0,decodes=io
+mem,owns=io+mem,locks=none
[ 0.085440] vgaarb: loaded
[ 0.085449] vgaarb: bridge control possible 0000:01:00.0
[ 0.085617] PCI: Using ACPI for IRQ routing
[ 0.085633] PCI: pci_cache_line_size set to 32 bytes
[ 0.085717] pci 0000:01:00.0: no compatible bridge window for [mem
0xd0000000-0xdfffffff pref]
[ 0.085771] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.085786] reserve RAM buffer: 000000001fff0000 - 000000001fffffff
[ 0.086244] Switching to clocksource pit
[ 0.089486] pnp: PnP ACPI init
[ 0.089567] ACPI: bus type pnp registered
[ 0.090324] pnp 00:00: [mem 0x000cd000-0x000cffff]
[ 0.090340] pnp 00:00: [mem 0x000f0000-0x000f7fff]
[ 0.090354] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[ 0.090368] pnp 00:00: [mem 0x000fc000-0x000fffff]
[ 0.090382] pnp 00:00: [mem 0x1fff0000-0x1fffffff]
[ 0.090397] pnp 00:00: [mem 0xffff0000-0xffffffff]
[ 0.090410] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.090424] pnp 00:00: [mem 0x00100000-0x1ffeffff]
[ 0.090513] pnp 00:00: disabling [mem 0x000cd000-0x000cffff] because
it overlaps 0000:01:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
[ 0.090537] pnp 00:00: disabling [mem 0x000f0000-0x000f7fff] because
it overlaps 0000:01:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
[ 0.090561] pnp 00:00: disabling [mem 0x000f8000-0x000fbfff] because
it overlaps 0000:01:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
[ 0.090585] pnp 00:00: disabling [mem 0x000fc000-0x000fffff] because
it overlaps 0000:01:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
[ 0.090609] pnp 00:00: disabling [mem 0x00000000-0x0009ffff] because
it overlaps 0000:01:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
[ 0.090634] pnp 00:00: disabling [mem 0x00100000-0x1ffeffff] because
it overlaps 0000:01:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
[ 0.090796] system 00:00: [mem 0x1fff0000-0x1fffffff] could not be
reserved
[ 0.090815] system 00:00: [mem 0xffff0000-0xffffffff] has been
reserved
[ 0.090835] system 00:00: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 0.091151] pnp 00:01: [bus 00-ff]
[ 0.091165] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.091179] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.091193] pnp 00:01: [io 0x0d00-0x3fff window]
[ 0.091206] pnp 00:01: [io 0x4000-0x4041]
[ 0.091219] pnp 00:01: [io 0x4042-0x4fff window]
[ 0.091233] pnp 00:01: [io 0x5000-0x500f]
[ 0.091246] pnp 00:01: [io 0x5010-0xffff window]
[ 0.091261] pnp 00:01: [mem 0x000a0000-0x000ccfff window]
[ 0.091276] pnp 00:01: [mem 0x20000000-0xffefffff window]
[ 0.091431] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03
(active)
[ 0.091841] pnp 00:02: [io 0x0010-0x001f]
[ 0.091854] pnp 00:02: [io 0x0022-0x003f]
[ 0.091866] pnp 00:02: [io 0x0044-0x005f]
[ 0.091879] pnp 00:02: [io 0x0062-0x0063]
[ 0.091891] pnp 00:02: [io 0x0065-0x006f]
[ 0.091903] pnp 00:02: [io 0x0074-0x007f]
[ 0.091916] pnp 00:02: [io 0x0091-0x0093]
[ 0.091928] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.091940] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.091953] pnp 00:02: [io 0x03f0-0x03f1]
[ 0.091965] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.091978] pnp 00:02: [io 0x0294-0x0297]
[ 0.092182] system 00:02: [io 0x03f0-0x03f1] has been reserved
[ 0.092199] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.092215] system 00:02: [io 0x0294-0x0297] has been reserved
[ 0.092231] system 00:02: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.092291] pnp 00:03: [dma 4]
[ 0.092303] pnp 00:03: [io 0x0000-0x000f]
[ 0.092316] pnp 00:03: [io 0x0080-0x0090]
[ 0.092328] pnp 00:03: [io 0x0094-0x009f]
[ 0.092349] pnp 00:03: [io 0x00c0-0x00df]
[ 0.092466] pnp 00:03: Plug and Play ACPI device, IDs PNP0200
(active)
[ 0.092518] pnp 00:04: [io 0x0070-0x0073]
[ 0.092534] pnp 00:04: [irq 8]
[ 0.092657] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00
(active)
[ 0.092699] pnp 00:05: [io 0x0061]
[ 0.092815] pnp 00:05: Plug and Play ACPI device, IDs PNP0800
(active)
[ 0.092859] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.092872] pnp 00:06: [irq 13]
[ 0.092989] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04
(active)
[ 0.094724] pnp 00:07: [io 0x03f2-0x03f5]
[ 0.094738] pnp 00:07: [io 0x03f7]
[ 0.094750] pnp 00:07: [irq 6]
[ 0.094761] pnp 00:07: [dma 2]
[ 0.094956] pnp 00:07: Plug and Play ACPI device, IDs PNP0700
(active)
[ 0.096374] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.096388] pnp 00:08: [irq 4]
[ 0.096660] pnp 00:08: Plug and Play ACPI device, IDs PNP0501
(active)
[ 0.098165] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.098179] pnp 00:09: [irq 3]
[ 0.098452] pnp 00:09: Plug and Play ACPI device, IDs PNP0501
(active)
[ 0.100557] pnp 00:0a: [io 0x0378-0x037f]
[ 0.100572] pnp 00:0a: [irq 7]
[ 0.100804] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400
(active)
[ 0.101523] pnp 00:0b: [irq 12]
[ 0.101653] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13
(active)
[ 0.101793] pnp 00:0c: [io 0x0060]
[ 0.101806] pnp 00:0c: [io 0x0064]
[ 0.101818] pnp 00:0c: [irq 1]
[ 0.101957] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303
(active)
[ 0.102007] pnp: PnP ACPI: found 13 devices
[ 0.102017] ACPI: ACPI bus type pnp unregistered
[ 0.102035] PnPBIOS: Disabled by ACPI PNP
[ 0.144568] Switching to clocksource acpi_pm
[ 0.144635] PCI: max bus depth: 1 pci_try_num: 2
[ 0.144681] pci 0000:00:07.3: BAR 13: [io 0x4000-0x403f] has bogus
alignment
[ 0.144698] pci 0000:00:07.3: BAR 14: [io 0x5000-0x500f] has bogus
alignment
[ 0.144739] pci 0000:01:00.0: BAR 0: trying firmware assignment [mem
0xd0000000-0xdfffffff pref]
[ 0.144764] pci 0000:01:00.0: BAR 0: [mem 0xd0000000-0xdfffffff pref]
conflicts with PCI Bus 0000:00 [mem 0x20000000-0xffefffff]
[ 0.144784] pci 0000:01:00.0: BAR 0: can't assign mem pref (size
0x10000000)
[ 0.144803] pci 0000:01:00.0: BAR 6: assigned [mem
0xd8000000-0xd801ffff pref]
[ 0.144820] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.144835] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.144855] pci 0000:00:01.0: bridge window [mem
0xec000000-0xedffffff]
[ 0.144873] pci 0000:00:01.0: bridge window [mem
0xd8000000-0xe7ffffff pref]
[ 0.144911] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.144926] pci_bus 0000:00: resource 5 [io 0x0d00-0x3fff]
[ 0.144940] pci_bus 0000:00: resource 6 [io 0x4042-0x4fff]
[ 0.144955] pci_bus 0000:00: resource 7 [io 0x5010-0xffff]
[ 0.144970] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000ccfff]
[ 0.144986] pci_bus 0000:00: resource 9 [mem 0x20000000-0xffefffff]
[ 0.145002] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.145018] pci_bus 0000:01: resource 1 [mem 0xec000000-0xedffffff]
[ 0.145034] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff
pref]
[ 0.145234] NET: Registered protocol family 2
[ 0.145509] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.145787] Switched to NOHz mode on CPU #0
[ 0.146488] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 0.147057] TCP bind hash table entries: 16384 (order: 4, 65536
bytes)
[ 0.147432] TCP: Hash tables configured (established 16384 bind
16384)
[ 0.147444] TCP reno registered
[ 0.147460] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.147494] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.148004] NET: Registered protocol family 1
[ 0.148115] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.148214] pci 0000:01:00.0: Boot video device
[ 0.148227] PCI: CLS 32 bytes, default 32
[ 0.148473] Unpacking initramfs...
[ 1.612266] Freeing initrd memory: 8932k freed
[ 1.671006] audit: initializing netlink socket (disabled)
[ 1.671050] type=2000 audit(1316241956.664:1): initialized
[ 1.763151] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.763539] VFS: Disk quotas dquot_6.5.2
[ 1.763634] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 1.763819] msgmni has been set to 1004
[ 1.764500] alg: No test for stdrng (krng)
[ 1.764628] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 1.764644] io scheduler noop registered
[ 1.764654] io scheduler deadline registered
[ 1.764688] io scheduler cfq registered (default)
[ 1.765488] ERST: Table is not found!
[ 1.765546] isapnp: Scanning for PnP cards...
[ 2.119940] isapnp: No Plug & Play device found
[ 2.120279] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.140836] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.161429] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.182792] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.203507] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.204425] Linux agpgart interface v0.103
[ 2.204882] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 2.210288] agpgart-intel 0000:00:00.0: AGP aperture is 64M @
0xe8000000
[ 2.210914] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
at 0x60,0x64 irq 1,12
[ 2.214586] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.214618] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.215147] mousedev: PS/2 mouse device common for all mice
[ 2.215301] rtc_cmos 00:04: RTC can wake from S4
[ 2.215568] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.215614] rtc0: alarms up to one month, 242 bytes nvram
[ 2.215839] EISA: Probing bus 0 at eisa.0
[ 2.215857] EISA: Cannot allocate resource for mainboard
[ 2.215870] Cannot allocate resource for EISA slot 1
[ 2.215882] Cannot allocate resource for EISA slot 2
[ 2.215894] Cannot allocate resource for EISA slot 3
[ 2.215907] Cannot allocate resource for EISA slot 4
[ 2.215919] Cannot allocate resource for EISA slot 5
[ 2.215931] Cannot allocate resource for EISA slot 6
[ 2.215943] Cannot allocate resource for EISA slot 7
[ 2.215955] Cannot allocate resource for EISA slot 8
[ 2.215966] EISA: Detected 0 cards.
[ 2.215978] cpuidle: using governor ladder
[ 2.215988] cpuidle: using governor menu
[ 2.217315] TCP cubic registered
[ 2.217429] NET: Registered protocol family 10
[ 2.220093] Mobile IPv6
[ 2.220107] NET: Registered protocol family 17
[ 2.220141] Registering the dns_resolver key type
[ 2.220212] Using IPI Shortcut mode
[ 2.220666] PM: Hibernation image not present or could not be loaded.
[ 2.220719] registered taskstats version 1
[ 2.221345] rtc_cmos 00:04: setting system clock to 2011-09-17
06:45:57 UTC (1316241957)
[ 2.221605] Initializing network drop monitor service
[ 2.222083] Freeing unused kernel memory: 444k freed
[ 2.224808] Write protecting the kernel text: 2520k
[ 2.224920] Write protecting the kernel read-only data: 1020k
[ 2.239643] input: AT Translated Set 2 keyboard
as /devices/platform/i8042/serio0/input/input0
[ 2.301742] udev[42]: starting version 164
[ 2.544570] tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27,
2007)
[ 2.545064] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 2.545078] PCI: setting IRQ 11 as level-triggered
[ 2.545101] tulip 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 11
(level, low) -> IRQ 11
[ 2.545181] tulip: tulip_init_one: Enabled WOL support for AN983B
[ 2.545617] tulip0: MII transceiver #1 config 3100 status 7869
advertising 05e1
[ 2.740166] Refined TSC clocksource calibration: 749.914 MHz.
[ 2.740192] Switching to clocksource tsc
[ 2.741857] net eth0: ADMtek Comet rev 17 at Port 0xa800,
00:50:bf:b8:f9:79, IRQ 11
[ 2.767626] SCSI subsystem initialized
[ 2.779812] usbcore: registered new interface driver usbfs
[ 2.779909] usbcore: registered new interface driver hub
[ 2.796242] usbcore: registered new device driver usb
[ 2.799303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 2.810061] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.810078] ACPI: Thermal Zone [THRM] (32 C)
[ 2.811283] ACPI: Fan [FAN] (on)
[ 2.868823] FDC 0 is a post-1991 82077
[ 2.913919] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.914456] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 2.914470] PCI: setting IRQ 10 as level-triggered
[ 2.914493] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10
(level, low) -> IRQ 10
[ 2.914524] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 2.914618] uhci_hcd 0000:00:07.2: new USB bus registered, assigned
bus number 1
[ 2.914694] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000a000
[ 2.914916] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.914932] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.914946] usb usb1: Product: UHCI Host Controller
[ 2.914958] usb usb1: Manufacturer: Linux 3.0.0-1-486 uhci_hcd
[ 2.914971] usb usb1: SerialNumber: 0000:00:07.2
[ 2.915522] hub 1-0:1.0: USB hub found
[ 2.915546] hub 1-0:1.0: 2 ports detected
[ 2.993738] libata version 3.00 loaded.
[ 2.995168] sata_via 0000:00:0b.0: version 2.6
[ 2.995220] sata_via 0000:00:0b.0: PCI INT A -> Link[LNKD] -> GSI 10
(level, low) -> IRQ 10
[ 2.995496] sata_via 0000:00:0b.0: routed to hard irq line 10
[ 3.023445] scsi0 : sata_via
[ 3.028142] scsi1 : sata_via
[ 3.033972] scsi2 : sata_via
[ 3.034263] ata1: SATA max UDMA/133 port i16@0xac00 bmdma 0xbc00 irq
10
[ 3.034280] ata2: SATA max UDMA/133 port i16@0xb000 bmdma 0xbc08 irq
10
[ 3.034295] ata3: PATA max UDMA/133 port i16@0xb400 bmdma 0xbc10 irq
10
[ 3.034480] ata_piix 0000:00:07.1: version 2.13
[ 3.040137] scsi3 : ata_piix
[ 3.045440] scsi4 : ata_piix
[ 3.045748] ata4: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000
irq 14
[ 3.045764] ata5: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xf008
irq 15
[ 3.224439] ata4.00: CFA: TRANSCEND, 20080820, max UDMA/66
[ 3.224458] ata4.00: 7831152 sectors, multi 0: LBA
[ 3.240209] ata4.00: configured for UDMA/33
[ 3.360078] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.368214] ata1.00: ATAPI: Optiarc DVD RW AD-7700S, 1.03, max
UDMA/100
[ 3.384209] ata1.00: configured for UDMA/100
[ 3.411485] scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7700S
1.03 PQ: 0 ANSI: 5
[ 3.742724] ata2: SATA link down (SStatus 0 SControl 310)
[ 3.907774] scsi 3:0:0:0: Direct-Access ATA TRANSCEND
2008 PQ: 0 ANSI: 5
[ 3.976874] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 3.976894] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.978626] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 3.979359] sd 3:0:0:0: [sda] 7831152 512-byte logical blocks: (4.00
GB/3.73 GiB)
[ 3.979544] sd 3:0:0:0: [sda] Write Protect is off
[ 3.979561] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.979644] sd 3:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.982979] sda: sda1
[ 3.984728] sd 3:0:0:0: [sda] Attached SCSI disk
[ 4.024149] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 4.028012] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 4.728222] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
[ 5.393145] udev[223]: starting version 164
[ 5.728553] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.770601] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
[ 5.886748] piix4_smbus 0000:00:07.3: SMBus Host Controller at
0x5000, revision 0
[ 5.953697] input: Power Button
as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 5.953730] ACPI: Power Button [PWRB]
[ 5.954070] input: Power Button
as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 5.954090] ACPI: Power Button [PWRF]
[ 5.958988] ACPI: acpi_idle registered with cpuidle
[ 5.959128] Marking TSC unstable due to TSC halts in idle
[ 5.976157] Switching to clocksource acpi_pm
[ 6.219270] input: PC Speaker
as /devices/platform/pcspkr/input/input3
[ 6.265136] parport_pc 00:0a: reported by Plug and Play ACPI
[ 6.265215] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 6.459007] [drm] Initialized drm 1.1.0 20060810
[ 6.546118] psmouse serio1: ID: 10 00 64
[ 6.869995] [drm] radeon kernel modesetting enabled.
[ 6.870641] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 6.870666] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 6.876716] [drm] initializing kernel modesetting (RV280
0x1002:0x5964 0x148C:0x2073).
[ 6.876789] [drm] register mmio base: 0xED000000
[ 6.876800] [drm] register mmio size: 65536
[ 6.880508] agpgart-intel 0000:00:00.0: AGP 1.0 bridge
[ 6.888240] agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x
mode
[ 6.888303] radeon 0000:01:00.0: putting AGP V2 device into 2x mode
[ 6.888326] radeon 0000:01:00.0: GTT: 64M 0xE8000000 - 0xEBFFFFFF
[ 6.888342] [drm] Generation 2 PCI interface, using max accessible
memory
[ 6.888363] radeon 0000:01:00.0: VRAM: 128M 0x0000000000000000 -
0x0000000007FFFFFF (128M used)
[ 6.888418] [drm] Supports vblank timestamp caching Rev 1
(10.10.2010).
[ 6.888429] [drm] Driver supports precise vblank timestamp query.
[ 6.888468] [drm] radeon: irq initialized.
[ 6.888482] mtrr: zero sized request
[ 6.888493] [drm] Detected VRAM RAM=128M, BAR=0M
[ 6.888503] [drm] RAM width 64bits DDR
[ 6.890422] [TTM] Zone kernel: Available graphics memory: 257438
kiB.
[ 6.890437] [TTM] Initializing pool allocator.
[ 6.890496] radeon_bo_create:116 alloc size 0M bigger than 0Mb limit
[ 6.890514] radeon 0000:01:00.0: Fatal error during GPU init
[ 6.890586] [drm] radeon: finishing device.
[ 6.890601] [drm] radeon: cp finalized
[ 6.890642] [TTM] Trying to take down uninitialized memory manager
type 1
[ 6.890716] [TTM] Finalizing pool allocator.
[ 6.890812] [TTM] Zone kernel: Used memory at exit: 0 kiB.
[ 6.890824] [drm] radeon: ttm finalized
[ 6.890835] vga_switcheroo: disabled
[ 6.891803] radeon 0000:01:00.0: PCI INT A disabled
[ 6.891836] radeon: probe of 0000:01:00.0 failed with error -12
[ 6.954015] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 6.954032] PCI: setting IRQ 5 as level-triggered
[ 6.954054] C-Media PCI 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI
5 (level, low) -> IRQ 5
[ 7.171736] input: ImPS/2 Generic Wheel Mouse
as /devices/platform/i8042/serio1/input/input4
[ 7.586073] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 10.705962] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 10.898033] loop: module loaded
[ 14.922882] sshd (1130): /proc/1130/oom_adj is deprecated, please
use /proc/1130/oom_score_adj instead.
[ 15.209719] tulip 0000:00:0a.0: eth0: tulip_stop_rxtx() failed (CSR5
0xfc664010 CSR6 0xff972113)
[ 15.209749] net eth0: Setting full-duplex based on MII#1 link partner
capability of 45e1
[ 23.216073] eth0: no IPv6 routers present
Reply to:
- References:
- Re: Bug#641176: xserver-xorg-video-radeon: Radeon 9200SE, Detected VRAM RAM=0M, BAR=0M
- From: Julien Cristau <jcristau@debian.org>
- Bug#641176: xserver-xorg-video-radeon: Radeon 9200SE, Detected VRAM RAM=0M, BAR=0M
- From: Tomi Leppänen <tomppeli12@gmail.com>
- Bug#641176: xserver-xorg-video-radeon: Radeon 9200SE, Detected VRAM RAM=0M, BAR=0M
- From: Jonathan Nieder <jrnieder@gmail.com>
- Bug#641176: xserver-xorg-video-radeon: Radeon 9200SE, Detected VRAM RAM=0M, BAR=0M
- From: Tomi Leppänen <tomppeli12@gmail.com>
- Bug#641176: xserver-xorg-video-radeon: Radeon 9200SE, Detected VRAM RAM=0M, BAR=0M
- From: Jonathan Nieder <jrnieder@gmail.com>