Bug#641176: xserver-xorg-video-radeon: Radeon 9200SE, Detected VRAM RAM=0M, BAR=0M
to, 2011-09-15 kello 16:35 -0500, Jonathan Nieder kirjoitti:
> Hi,
>
> Tomi Leppänen wrote:
>
> > I tried with 3.0.0-1-486 (from wheezy) but it didn't work much better,
> > but at least something changed:
> > dmesg |grep BAR
> [...]
> > [ 0.090632] pnp 00:00: disabling [mem 0x00100000-0x1ffeffff] because it overlaps 0000:01:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
> > [ 0.144712] pci 0000:01:00.0: BAR 0: trying firmware assignment [mem 0xd0000000-0xdfffffff pref]
> > [ 0.144737] pci 0000:01:00.0: BAR 0: [mem 0xd0000000-0xdfffffff pref] conflicts with PCI Bus 0000:01 [mem 0xd8000000-0xe7ffffff pref]
> > [ 0.144757] pci 0000:01:00.0: BAR 0: can't assign mem pref (size 0x10000000)
> > [ 0.144776] pci 0000:01:00.0: BAR 6: assigned [mem 0xd8000000-0xd801ffff pref]
> > [ 10.883325] [drm] Detected VRAM RAM=128M, BAR=0M
> > But still X won't start. Log seems to be the same (I can post it if
> > needed).
> >
> > There are no newer BIOS updates for that motherboard (Gigabyte GA-6BXE
> > with Intel 440BX) and I've updated it once already.
>
> Please attach full "dmesg" output from right after bootup.
>
> Thanks,
> Jonathan
Here:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-1-486 (Debian 3.0.0-3)
(ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-8) ) #1 Sat Aug
27 15:56:48 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI
data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000
(reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.1 present.
[ 0.000000] DMI: /i440BX-8671, BIOS 4.51 PG 02/06/01
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-F7FFF uncachable
[ 0.000000] F8000-FBFFF write-through
[ 0.000000] FC000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[ 0.000000] init_memory_mapping: 0000000000000000-000000001fff0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001fc00000 page 2M
[ 0.000000] 001fc00000 - 001fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1fff0000 @
17fb000-1800000
[ 0.000000] RAMDISK: 1777b000 - 18034000
[ 0.000000] ACPI: RSDP 000f6ee0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 1fff3000 00028 (v01 GBT AWRDACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: FACP 1fff3040 00074 (v01 GBT AWRDACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: DSDT 1fff30c0 02629 (v01 GBT AWRDACPI 00001000
MSFT 0100000C)
[ 0.000000] ACPI: FACS 1fff0000 00040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fff0000
[ 0.000000] low ram: 0 - 1fff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001fff0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001fff0
[ 0.000000] On node 0 totalpages: 130943
[ 0.000000] free_area_init_node: node 0, pgdat c13b2ae8, node_mem_map
dfbef200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125968 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
20000000:dfff0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 129919
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-486
root=UUID=7f4075cc-5b16-4fe4-a51b-ee8f697feac1 ro quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 505500k/524224k available (2519k kernel code,
18272k reserved, 1296k data, 444k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 0.000000] .init : 0xc13ba000 - 0xc1429000 ( 444 kB)
[ 0.000000] .data : 0xc1275d6c - 0xc13b9e80 (1296 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1275d6c (2519 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] NR_IRQS:288
[ 0.000000] CPU 0 irqstacks, hard=df406000 soft=df408000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 750.086 MHz processor.
[ 0.008010] Calibrating delay loop (skipped), value calculated using
timer frequency.. 1500.17 BogoMIPS (lpj=3000344)
[ 0.008033] pid_max: default: 32768 minimum: 301
[ 0.008190] Security Framework initialized
[ 0.008213] SELinux: Disabled at boot.
[ 0.008267] Mount-cache hash table entries: 512
[ 0.008647] Initializing cgroup subsys cpuacct
[ 0.008678] Initializing cgroup subsys memory
[ 0.008719] Initializing cgroup subsys devices
[ 0.008730] Initializing cgroup subsys freezer
[ 0.008741] Initializing cgroup subsys net_cls
[ 0.008752] Initializing cgroup subsys blkio
[ 0.008886] CPU: Centaur VIA Nehemiah stepping 04
[ 0.009988] ACPI: Core revision 20110413
[ 0.011349] ACPI Warning: Detected an unsupported executable opcode
at module-level: [0x0070] at table offset 0x0A6D (20110413/psloop-526)
[ 0.011388] ACPI Warning: Detected an unsupported executable opcode
at module-level: [0x0070] at table offset 0x0A76 (20110413/psloop-526)
[ 0.015427] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.016287] Performance Events:
[ 0.017195] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.017607] devtmpfs: initialized
[ 0.018114] PM: Registering ACPI NVS region at 1fff0000 (12288 bytes)
[ 0.018771] print_constraints: dummy:
[ 0.018957] NET: Registered protocol family 16
[ 0.019336] EISA bus registered
[ 0.019368] ACPI: bus type pci registered
[ 0.050029] PCI: PCI BIOS revision 2.10 entry at 0xfb020, last bus=1
[ 0.050041] PCI: Using configuration type 1 for base access
[ 0.052208] bio: create slab <bio-0> at 0
[ 0.053923] ACPI: EC: Look up EC in DSDT
[ 0.060142] ACPI: Interpreter enabled
[ 0.060161] ACPI: (supports S0 S1 S4 S5)
[ 0.060242] ACPI: Using PIC for interrupt routing
[ 0.072457] ACPI: Power Resource [PFAN] (on)
[ 0.073457] ACPI: No dock devices found.
[ 0.073468] HEST: Table not found.
[ 0.073485] PCI: Ignoring host bridge windows from ACPI; if
necessary, use "pci=use_crs" and report a bug
[ 0.073828] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.074512] pci_root PNP0A03:00: host bridge window [io
0x0000-0x0cf7] (ignored)
[ 0.074529] pci_root PNP0A03:00: host bridge window [io
0x0d00-0x3fff] (ignored)
[ 0.074545] pci_root PNP0A03:00: host bridge window [io
0x4042-0x4fff] (ignored)
[ 0.074561] pci_root PNP0A03:00: host bridge window [io
0x5010-0xffff] (ignored)
[ 0.074578] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000ccfff] (ignored)
[ 0.074596] pci_root PNP0A03:00: host bridge window [mem
0x20000000-0xffefffff] (ignored)
[ 0.074648] pci 0000:00:00.0: [8086:7190] type 0 class 0x000600
[ 0.074677] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xebffffff
pref]
[ 0.074770] pci 0000:00:01.0: [8086:7191] type 1 class 0x000604
[ 0.074850] pci 0000:00:07.0: [8086:7110] type 0 class 0x000601
[ 0.074969] pci 0000:00:07.1: [8086:7111] type 0 class 0x000101
[ 0.075034] pci 0000:00:07.1: reg 20: [io 0xf000-0xf00f]
[ 0.075106] pci 0000:00:07.2: [8086:7112] type 0 class 0x000c03
[ 0.075173] pci 0000:00:07.2: reg 20: [io 0xa000-0xa01f]
[ 0.075240] pci 0000:00:07.3: [8086:7113] type 0 class 0x000680
[ 0.075255] * Found PM-Timer Bug on the chipset. Due to workarounds
for a bug,
[ 0.075263] * this clock source is slow. Consider trying other clock
sources
[ 0.075359] pci 0000:00:07.3: quirk: [io 0x4000-0x403f] claimed by
PIIX4 ACPI
[ 0.075377] pci 0000:00:07.3: quirk: [io 0x5000-0x500f] claimed by
PIIX4 SMB
[ 0.075442] pci 0000:00:09.0: [13f6:0111] type 0 class 0x000401
[ 0.075474] pci 0000:00:09.0: reg 10: [io 0xa400-0xa4ff]
[ 0.075559] pci 0000:00:09.0: supports D1 D2
[ 0.075604] pci 0000:00:0a.0: [1317:0985] type 0 class 0x000200
[ 0.075635] pci 0000:00:0a.0: reg 10: [io 0xa800-0xa8ff]
[ 0.075660] pci 0000:00:0a.0: reg 14: [mem 0xf0000000-0xf00003ff]
[ 0.075719] pci 0000:00:0a.0: reg 30: [mem 0xee000000-0xee01ffff
pref]
[ 0.075751] pci 0000:00:0a.0: supports D1 D2
[ 0.075764] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.075780] pci 0000:00:0a.0: PME# disabled
[ 0.075831] pci 0000:00:0b.0: [1106:3249] type 0 class 0x000104
[ 0.075864] pci 0000:00:0b.0: reg 10: [io 0xac00-0xac0f]
[ 0.075887] pci 0000:00:0b.0: reg 14: [io 0xb000-0xb00f]
[ 0.075910] pci 0000:00:0b.0: reg 18: [io 0xb400-0xb40f]
[ 0.075933] pci 0000:00:0b.0: reg 1c: [io 0xb800-0xb80f]
[ 0.075956] pci 0000:00:0b.0: reg 20: [io 0xbc00-0xbc1f]
[ 0.075979] pci 0000:00:0b.0: reg 24: [io 0xc000-0xc0ff]
[ 0.076037] pci 0000:00:0b.0: reg 30: [mem 0xef000000-0xef00ffff
pref]
[ 0.076153] pci 0000:01:00.0: [1002:5964] type 0 class 0x000300
[ 0.076187] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff
pref]
[ 0.076210] pci 0000:01:00.0: reg 14: [io 0x9000-0x90ff]
[ 0.076233] pci 0000:01:00.0: reg 18: [mem 0xed000000-0xed00ffff]
[ 0.076280] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff
pref]
[ 0.076317] pci 0000:01:00.0: supports D1 D2
[ 0.076378] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.076395] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.076412] pci 0000:00:01.0: bridge window [mem
0xec000000-0xedffffff]
[ 0.076430] pci 0000:00:01.0: bridge window [mem
0xd8000000-0xe7ffffff pref]
[ 0.076452] pci_bus 0000:00: on NUMA node 0
[ 0.076470] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.076994] pci0000:00: Unable to request _OSC control (_OSC support
mask: 0x1e)
[ 0.080367] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12
14 15)
[ 0.080567] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12
14 15)
[ 0.080769] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12
14 15) *9
[ 0.080965] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12
14 15)
[ 0.081360] vgaarb: device added: PCI:0000:01:00.0,decodes=io
+mem,owns=io+mem,locks=none
[ 0.081374] vgaarb: loaded
[ 0.081382] vgaarb: bridge control possible 0000:01:00.0
[ 0.081549] PCI: Using ACPI for IRQ routing
[ 0.081565] PCI: pci_cache_line_size set to 32 bytes
[ 0.081645] pci 0000:01:00.0: no compatible bridge window for [mem
0xd0000000-0xdfffffff pref]
[ 0.081697] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.081712] reserve RAM buffer: 000000001fff0000 - 000000001fffffff
[ 0.082170] Switching to clocksource pit
[ 0.085502] pnp: PnP ACPI init
[ 0.085583] ACPI: bus type pnp registered
[ 0.086342] pnp 00:00: [mem 0x000cd000-0x000cffff]
[ 0.086357] pnp 00:00: [mem 0x000f0000-0x000f7fff]
[ 0.086371] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[ 0.086385] pnp 00:00: [mem 0x000fc000-0x000fffff]
[ 0.086399] pnp 00:00: [mem 0x1fff0000-0x1fffffff]
[ 0.086414] pnp 00:00: [mem 0xffff0000-0xffffffff]
[ 0.086427] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.086441] pnp 00:00: [mem 0x00100000-0x1ffeffff]
[ 0.086530] pnp 00:00: disabling [mem 0x000cd000-0x000cffff] because
it overlaps 0000:01:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
[ 0.086554] pnp 00:00: disabling [mem 0x000f0000-0x000f7fff] because
it overlaps 0000:01:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
[ 0.086578] pnp 00:00: disabling [mem 0x000f8000-0x000fbfff] because
it overlaps 0000:01:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
[ 0.086602] pnp 00:00: disabling [mem 0x000fc000-0x000fffff] because
it overlaps 0000:01:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
[ 0.086626] pnp 00:00: disabling [mem 0x00000000-0x0009ffff] because
it overlaps 0000:01:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
[ 0.086651] pnp 00:00: disabling [mem 0x00100000-0x1ffeffff] because
it overlaps 0000:01:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
[ 0.086814] system 00:00: [mem 0x1fff0000-0x1fffffff] could not be
reserved
[ 0.086833] system 00:00: [mem 0xffff0000-0xffffffff] has been
reserved
[ 0.086853] system 00:00: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 0.087173] pnp 00:01: [bus 00-ff]
[ 0.087187] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.087201] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.087215] pnp 00:01: [io 0x0d00-0x3fff window]
[ 0.087228] pnp 00:01: [io 0x4000-0x4041]
[ 0.087242] pnp 00:01: [io 0x4042-0x4fff window]
[ 0.087255] pnp 00:01: [io 0x5000-0x500f]
[ 0.087268] pnp 00:01: [io 0x5010-0xffff window]
[ 0.087283] pnp 00:01: [mem 0x000a0000-0x000ccfff window]
[ 0.087299] pnp 00:01: [mem 0x20000000-0xffefffff window]
[ 0.087453] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03
(active)
[ 0.087863] pnp 00:02: [io 0x0010-0x001f]
[ 0.087876] pnp 00:02: [io 0x0022-0x003f]
[ 0.087888] pnp 00:02: [io 0x0044-0x005f]
[ 0.087901] pnp 00:02: [io 0x0062-0x0063]
[ 0.087913] pnp 00:02: [io 0x0065-0x006f]
[ 0.087925] pnp 00:02: [io 0x0074-0x007f]
[ 0.087938] pnp 00:02: [io 0x0091-0x0093]
[ 0.087950] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.087962] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.087975] pnp 00:02: [io 0x03f0-0x03f1]
[ 0.087987] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.088000] pnp 00:02: [io 0x0294-0x0297]
[ 0.088204] system 00:02: [io 0x03f0-0x03f1] has been reserved
[ 0.088221] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.088237] system 00:02: [io 0x0294-0x0297] has been reserved
[ 0.088254] system 00:02: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.088310] pnp 00:03: [dma 4]
[ 0.088322] pnp 00:03: [io 0x0000-0x000f]
[ 0.088335] pnp 00:03: [io 0x0080-0x0090]
[ 0.088347] pnp 00:03: [io 0x0094-0x009f]
[ 0.088368] pnp 00:03: [io 0x00c0-0x00df]
[ 0.088489] pnp 00:03: Plug and Play ACPI device, IDs PNP0200
(active)
[ 0.088541] pnp 00:04: [io 0x0070-0x0073]
[ 0.088557] pnp 00:04: [irq 8]
[ 0.088680] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00
(active)
[ 0.088722] pnp 00:05: [io 0x0061]
[ 0.088838] pnp 00:05: Plug and Play ACPI device, IDs PNP0800
(active)
[ 0.088881] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.088894] pnp 00:06: [irq 13]
[ 0.089010] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04
(active)
[ 0.090748] pnp 00:07: [io 0x03f2-0x03f5]
[ 0.090761] pnp 00:07: [io 0x03f7]
[ 0.090773] pnp 00:07: [irq 6]
[ 0.090785] pnp 00:07: [dma 2]
[ 0.090979] pnp 00:07: Plug and Play ACPI device, IDs PNP0700
(active)
[ 0.092399] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.092413] pnp 00:08: [irq 4]
[ 0.092684] pnp 00:08: Plug and Play ACPI device, IDs PNP0501
(active)
[ 0.094191] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.094206] pnp 00:09: [irq 3]
[ 0.094469] pnp 00:09: Plug and Play ACPI device, IDs PNP0501
(active)
[ 0.096588] pnp 00:0a: [io 0x0378-0x037f]
[ 0.096602] pnp 00:0a: [irq 7]
[ 0.096835] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400
(active)
[ 0.097556] pnp 00:0b: [irq 12]
[ 0.097685] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13
(active)
[ 0.097787] pnp 00:0c: [io 0x0060]
[ 0.097799] pnp 00:0c: [io 0x0064]
[ 0.097848] pnp 00:0c: [irq 1]
[ 0.097988] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303
(active)
[ 0.098038] pnp: PnP ACPI: found 13 devices
[ 0.098048] ACPI: ACPI bus type pnp unregistered
[ 0.098065] PnPBIOS: Disabled by ACPI PNP
[ 0.140583] Switching to clocksource acpi_pm
[ 0.140648] PCI: max bus depth: 1 pci_try_num: 2
[ 0.140718] pci 0000:01:00.0: BAR 0: trying firmware assignment [mem
0xd0000000-0xdfffffff pref]
[ 0.140742] pci 0000:01:00.0: BAR 0: [mem 0xd0000000-0xdfffffff pref]
conflicts with PCI Bus 0000:01 [mem 0xd8000000-0xe7ffffff pref]
[ 0.140762] pci 0000:01:00.0: BAR 0: can't assign mem pref (size
0x10000000)
[ 0.140782] pci 0000:01:00.0: BAR 6: assigned [mem
0xd8000000-0xd801ffff pref]
[ 0.140798] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.140814] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.140834] pci 0000:00:01.0: bridge window [mem
0xec000000-0xedffffff]
[ 0.140852] pci 0000:00:01.0: bridge window [mem
0xd8000000-0xe7ffffff pref]
[ 0.140890] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.140905] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.140920] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.140936] pci_bus 0000:01: resource 1 [mem 0xec000000-0xedffffff]
[ 0.140953] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff
pref]
[ 0.141154] NET: Registered protocol family 2
[ 0.141434] IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
[ 0.141857] Switched to NOHz mode on CPU #0
[ 0.142410] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
[ 0.142979] TCP bind hash table entries: 16384 (order: 4, 65536
bytes)
[ 0.143355] TCP: Hash tables configured (established 16384 bind
16384)
[ 0.143367] TCP reno registered
[ 0.143383] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.143417] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.143928] NET: Registered protocol family 1
[ 0.143978] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.144137] pci 0000:01:00.0: Boot video device
[ 0.144150] PCI: CLS 32 bytes, default 32
[ 0.144398] Unpacking initramfs...
[ 1.608152] Freeing initrd memory: 8932k freed
[ 1.666895] audit: initializing netlink socket (disabled)
[ 1.666941] type=2000 audit(1316184652.660:1): initialized
[ 1.759040] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.759429] VFS: Disk quotas dquot_6.5.2
[ 1.759524] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 1.759709] msgmni has been set to 1004
[ 1.760380] alg: No test for stdrng (krng)
[ 1.760508] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 1.760524] io scheduler noop registered
[ 1.760535] io scheduler deadline registered
[ 1.760573] io scheduler cfq registered (default)
[ 1.761374] ERST: Table is not found!
[ 1.761429] isapnp: Scanning for PnP cards...
[ 2.115960] isapnp: No Plug & Play device found
[ 2.116298] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.136864] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.157459] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.178821] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.199530] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.200450] Linux agpgart interface v0.103
[ 2.200901] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[ 2.206312] agpgart-intel 0000:00:00.0: AGP aperture is 64M @
0xe8000000
[ 2.206937] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
at 0x60,0x64 irq 1,12
[ 2.210237] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.210267] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.210790] mousedev: PS/2 mouse device common for all mice
[ 2.210946] rtc_cmos 00:04: RTC can wake from S4
[ 2.211212] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.211258] rtc0: alarms up to one month, 242 bytes nvram
[ 2.211481] EISA: Probing bus 0 at eisa.0
[ 2.211533] Cannot allocate resource for EISA slot 4
[ 2.211546] Cannot allocate resource for EISA slot 5
[ 2.211582] EISA: Detected 0 cards.
[ 2.211593] cpuidle: using governor ladder
[ 2.211604] cpuidle: using governor menu
[ 2.212946] TCP cubic registered
[ 2.213062] NET: Registered protocol family 10
[ 2.215688] Mobile IPv6
[ 2.215702] NET: Registered protocol family 17
[ 2.215721] Registering the dns_resolver key type
[ 2.215863] Using IPI Shortcut mode
[ 2.216394] PM: Hibernation image not present or could not be loaded.
[ 2.216484] registered taskstats version 1
[ 2.217083] rtc_cmos 00:04: setting system clock to 2011-09-16
14:50:53 UTC (1316184653)
[ 2.217318] Initializing network drop monitor service
[ 2.217802] Freeing unused kernel memory: 444k freed
[ 2.220585] Write protecting the kernel text: 2520k
[ 2.220697] Write protecting the kernel read-only data: 1020k
[ 2.235041] input: AT Translated Set 2 keyboard
as /devices/platform/i8042/serio0/input/input0
[ 2.297471] udev[42]: starting version 164
[ 2.495125] tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27,
2007)
[ 2.495622] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 2.495636] PCI: setting IRQ 11 as level-triggered
[ 2.495659] tulip 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 11
(level, low) -> IRQ 11
[ 2.495744] tulip: tulip_init_one: Enabled WOL support for AN983B
[ 2.496270] tulip0: MII transceiver #1 config 3100 status 7869
advertising 05e1
[ 2.598426] net eth0: ADMtek Comet rev 17 at Port 0xa800,
00:50:bf:b8:f9:79, IRQ 11
[ 2.606601] ACPI: Fan [FAN] (on)
[ 2.736216] Refined TSC clocksource calibration: 749.914 MHz.
[ 2.736242] Switching to clocksource tsc
[ 2.754429] usbcore: registered new interface driver usbfs
[ 2.754526] usbcore: registered new interface driver hub
[ 2.762974] SCSI subsystem initialized
[ 2.768251] usbcore: registered new device driver usb
[ 2.771324] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 2.773431] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.773447] ACPI: Thermal Zone [THRM] (22 C)
[ 2.856853] FDC 0 is a post-1991 82077
[ 2.873583] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.874114] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 2.874129] PCI: setting IRQ 10 as level-triggered
[ 2.874152] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10
(level, low) -> IRQ 10
[ 2.874187] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 2.874265] uhci_hcd 0000:00:07.2: new USB bus registered, assigned
bus number 1
[ 2.874345] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000a000
[ 2.874570] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.874586] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.874601] usb usb1: Product: UHCI Host Controller
[ 2.874613] usb usb1: Manufacturer: Linux 3.0.0-1-486 uhci_hcd
[ 2.874625] usb usb1: SerialNumber: 0000:00:07.2
[ 2.875182] hub 1-0:1.0: USB hub found
[ 2.875212] hub 1-0:1.0: 2 ports detected
[ 2.992254] libata version 3.00 loaded.
[ 2.994366] ata_piix 0000:00:07.1: version 2.13
[ 3.021131] scsi0 : ata_piix
[ 3.031123] scsi1 : ata_piix
[ 3.031411] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000
irq 14
[ 3.031427] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xf008
irq 15
[ 3.031629] sata_via 0000:00:0b.0: version 2.6
[ 3.031674] sata_via 0000:00:0b.0: PCI INT A -> Link[LNKD] -> GSI 10
(level, low) -> IRQ 10
[ 3.031948] sata_via 0000:00:0b.0: routed to hard irq line 10
[ 3.038836] scsi2 : sata_via
[ 3.044136] scsi3 : sata_via
[ 3.048126] scsi4 : sata_via
[ 3.048437] ata3: SATA max UDMA/133 port i16@0xac00 bmdma 0xbc00 irq
10
[ 3.048454] ata4: SATA max UDMA/133 port i16@0xb000 bmdma 0xbc08 irq
10
[ 3.048469] ata5: PATA max UDMA/133 port i16@0xb400 bmdma 0xbc10 irq
10
[ 3.204333] ata1.00: CFA: TRANSCEND, 20080820, max UDMA/66
[ 3.204353] ata1.00: 7831152 sectors, multi 0: LBA
[ 3.220196] ata1.00: configured for UDMA/33
[ 3.220626] scsi 0:0:0:0: Direct-Access ATA TRANSCEND
2008 PQ: 0 ANSI: 5
[ 3.372089] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 3.380225] ata3.00: ATAPI: Optiarc DVD RW AD-7700S, 1.03, max
UDMA/100
[ 3.396208] ata3.00: configured for UDMA/100
[ 3.423493] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7700S
1.03 PQ: 0 ANSI: 5
[ 3.754721] ata4: SATA link down (SStatus 0 SControl 310)
[ 3.971553] sd 0:0:0:0: [sda] 7831152 512-byte logical blocks: (4.00
GB/3.73 GiB)
[ 3.971736] sd 0:0:0:0: [sda] Write Protect is off
[ 3.971753] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.971835] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.974433] sda: sda1
[ 3.975912] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.987200] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 3.987219] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.989134] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.029634] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.033208] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 5.230675] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
[ 5.919025] udev[229]: starting version 164
[ 6.239686] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.416520] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
[ 6.427736] piix4_smbus 0000:00:07.3: SMBus Host Controller at
0x5000, revision 0
[ 6.446501] input: Power Button
as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 6.446534] ACPI: Power Button [PWRB]
[ 6.448550] input: Power Button
as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 6.448579] ACPI: Power Button [PWRF]
[ 6.461688] ACPI: acpi_idle registered with cpuidle
[ 6.461838] Marking TSC unstable due to TSC halts in idle
[ 6.500155] Switching to clocksource acpi_pm
[ 6.678726] parport_pc 00:0a: reported by Plug and Play ACPI
[ 6.678801] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 6.732577] input: PC Speaker
as /devices/platform/pcspkr/input/input3
[ 6.999579] [drm] Initialized drm 1.1.0 20060810
[ 7.080115] psmouse serio1: ID: 10 00 64
[ 7.404243] [drm] radeon kernel modesetting enabled.
[ 7.404949] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 7.404975] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 7.407567] [drm] initializing kernel modesetting (RV280
0x1002:0x5964 0x148C:0x2073).
[ 7.407641] [drm] register mmio base: 0xED000000
[ 7.407652] [drm] register mmio size: 65536
[ 7.411388] agpgart-intel 0000:00:00.0: AGP 1.0 bridge
[ 7.413062] agpgart-intel 0000:00:00.0: putting AGP V2 device into 2x
mode
[ 7.413124] radeon 0000:01:00.0: putting AGP V2 device into 2x mode
[ 7.413147] radeon 0000:01:00.0: GTT: 64M 0xE8000000 - 0xEBFFFFFF
[ 7.413164] [drm] Generation 2 PCI interface, using max accessible
memory
[ 7.413184] radeon 0000:01:00.0: VRAM: 128M 0x0000000000000000 -
0x0000000007FFFFFF (128M used)
[ 7.413243] [drm] Supports vblank timestamp caching Rev 1
(10.10.2010).
[ 7.413254] [drm] Driver supports precise vblank timestamp query.
[ 7.413303] [drm] radeon: irq initialized.
[ 7.413318] mtrr: zero sized request
[ 7.413329] [drm] Detected VRAM RAM=128M, BAR=0M
[ 7.413339] [drm] RAM width 64bits DDR
[ 7.415848] [TTM] Zone kernel: Available graphics memory: 257438
kiB.
[ 7.415862] [TTM] Initializing pool allocator.
[ 7.415924] radeon_bo_create:116 alloc size 0M bigger than 0Mb limit
[ 7.415944] radeon 0000:01:00.0: Fatal error during GPU init
[ 7.416079] [drm] radeon: finishing device.
[ 7.416113] [drm] radeon: cp finalized
[ 7.416151] [TTM] Trying to take down uninitialized memory manager
type 1
[ 7.416224] [TTM] Finalizing pool allocator.
[ 7.416317] [TTM] Zone kernel: Used memory at exit: 0 kiB.
[ 7.416329] [drm] radeon: ttm finalized
[ 7.416340] vga_switcheroo: disabled
[ 7.417233] radeon 0000:01:00.0: PCI INT A disabled
[ 7.417266] radeon: probe of 0000:01:00.0 failed with error -12
[ 7.485850] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 7.485867] PCI: setting IRQ 5 as level-triggered
[ 7.485890] C-Media PCI 0000:00:09.0: PCI INT A -> Link[LNKB] -> GSI
5 (level, low) -> IRQ 5
[ 7.695165] input: ImPS/2 Generic Wheel Mouse
as /devices/platform/i8042/serio1/input/input4
[ 8.592836] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.755404] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.004685] loop: module loaded
[ 13.801775] tulip 0000:00:0a.0: eth0: tulip_stop_rxtx() failed (CSR5
0xfc664010 CSR6 0xff972113)
[ 13.801807] net eth0: Setting full-duplex based on MII#1 link partner
capability of 45e1
[ 15.897761] sshd (1366): /proc/1366/oom_adj is deprecated, please
use /proc/1366/oom_score_adj instead.
[ 21.248057] eth0: no IPv6 routers present
Reply to: