For the Redhat system ( 5.3 ) with HP driver 3.6.20-20.rhel5.x86_64 Regards On Thu, September 10, 2009 12:45 am, dann frazier wrote: > On Wed, Sep 09, 2009 at 12:14:20PM +0200, Olivier JUDITH wrote: >> Sorry , i made i big mistake . >> I'm very confuse. >> >> The problem not coming from the P410i card but from a P212 SAS PCI >> controller which is directly attached to the HP MSL Tape library. >> same driver module is used for both card. >> I have no information and device for P212 card and can not see the tape >> library on debian. >> >> /proc/scsi/scsi on debian >> Attached devices: >> Host: scsi0 Channel: 00 Id: 00 Lun: 00 >> Vendor: TEAC Model: DV-28S-V Rev: C.0F >> Type: CD-ROM ANSI SCSI revision: 05 >> >> >> /proc/scsi/scsi on Redhat >> Attached devices: >> Host: scsi0 Channel: 00 Id: 00 Lun: 00 >> Vendor: TEAC Model: DV-28S-V Rev: C.0F >> Type: CD-ROM ANSI SCSI revision: 05 >> Host: scsi2 Channel: 00 Id: 00 Lun: 00 >> Vendor: HP Model: Ultrium 3-SCSI Rev: C25W >> Type: Sequential-Access ANSI SCSI revision: 05 >> Host: scsi2 Channel: 00 Id: 01 Lun: 00 >> Vendor: HP Model: MSL G3 Series Rev: 4.60 >> Type: Medium Changer ANSI SCSI revision: 05 >> >> >> Sorry bad informations in my previous email > > Can you provide the 'dmesg' output from the Red Hat system? > > -- > dann frazier > >
Attachment:
lspci
Description: Binary data
Attachment:
dmesg
Description: Binary data
Attachment:
modinfo
Description: Binary data