Re: Driver for HP arry P410I ZM SAS array controller

[dann frazier <dannf@dannf.org>]

On Wed, Sep 09, 2009 at 12:14:20PM +0200, Olivier JUDITH wrote:
> Sorry , i made i big mistake .
> I'm very confuse.
> 
> The problem not coming from the P410i card but from a P212 SAS PCI
> controller which is directly attached to the HP MSL Tape library.
> same driver module is used for both card.
> I have no information and device for P212 card and can not see the tape
> library on debian.
> 
> /proc/scsi/scsi on debian
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>   Vendor: TEAC     Model: DV-28S-V         Rev: C.0F
>   Type:   CD-ROM                           ANSI  SCSI revision: 05
> 
> 
> /proc/scsi/scsi on Redhat
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>   Vendor: TEAC     Model: DV-28S-V         Rev: C.0F
>   Type:   CD-ROM                           ANSI SCSI revision: 05
> Host: scsi2 Channel: 00 Id: 00 Lun: 00
>   Vendor: HP       Model: Ultrium 3-SCSI   Rev: C25W
>   Type:   Sequential-Access                ANSI SCSI revision: 05
> Host: scsi2 Channel: 00 Id: 01 Lun: 00
>   Vendor: HP       Model: MSL G3 Series    Rev: 4.60
>   Type:   Medium Changer                   ANSI SCSI revision: 05
> 
> 
> Sorry bad informations in my previous email

Can you provide the 'dmesg' output from the Red Hat system?

-- 
dann frazier