Re: debian /dev/sequencer e alsa]
Alle 10:16, sabato 22 aprile 2006, crisium@email.it ha scritto:
> se eseguo alsaconf mi rileva la scheda audio e carica i moduli ma il
> sequencer non c'è in /dev mentre se carico i moduli elencati in
> precedenza questo salta fuori.
Ora ho il mio computer sotto mano e ti dico quello che ho fatto:
prima fase: effettivamente quando fai alsaconf poi dovresti anche
aggiornare /etc/modutils/alsa-base o qualche file del genere specificando
quali moduli caricare e come caricarli(quali opzioni) In coda all'email ti
posto il mio alsa-base (se non hai altre schede audio installate dovrebbe
andarti bene anche a te, l'unica cosa che potrebbe differire e' l'irq e la
porta. Controlla nel bios quali sono i valori e imposta quelli giusti. Io per
esempio ho l'irq 10 e la porta 330 e ho modificato la linea options cosi:
options snd-mpu401 port=0x330 irq=10
ad ogni modo controlla che tutte le linee che ci sono sul mio alsa-base
compaiano prima o dopo anche nel tuo ( io le impostazioni in piu le ho prese
dalla pagina del modulo via82xx di alsa). Dopo di che digita in una console
di root
#update-modules
e, se non hai tutti i moduli avviati riavvia il computer (modo poco elegante
ma consigliato per brevita'). Una volta riavviato controlla che ci sia il
device sequencer con
$ls -l /dev/sequencer
seconda fase: ho installato jack ( non ho avuto necessitaà di configurarlo ) e
l'ho fatto partire digitando su una console
$jackd -d alsa
terza fase: ho installato qsynth e, dopo averlo fatto partire digitando in una
nuova console
$qsynth
l'ho configurato cliccando sul tasto Setup. Le modifiche da fare sono:
- nel pannello MIDI controlla che su midi driver ci sia alsa-seq
- nel pannelo Audio, nel campo Audio Driver scegli jack
- nel pannello Soundfonts carica i tuoi soundfonts.
dai ok, ti chiederà di riavviare l'engine e il gioco e' fatto.
Apri qualche file midi e controlla che esca qualche suono. Se hai file midi
complicati ovvero con strumenti non ordinari vedi di caricarti dei
soundfounts che permettano di suonarlo.
Inoltre se senti distorto agisci sul gain di qsynth diminuendolo quasi al
minimo.
Se hai bisogno di soundfonts li puoi scaricare da me, te li metto sul mio
serverino ma di questo ci mettiamo d'accordo in privato.
Gook luck e w i led zeppelin! :)
fede
ecco il file /etc/modutils/alsa-base. di fatto io ho solo aggiunto qualche
riga al file standard di debian. Volendo lo si potrebbe smagrire di molto ma
al solito mancano tempo e voglia. Se vuoi solo le aggiunte vai sulla pagina
di documentazione del modulo via82xx.
# autoloader aliases
alias char-major-116 snd
alias snd-card-0 snd-via82xx
options snd-via82xx dxs_support=4
alias snd-card-1 snd-mpu401
options snd-mpu401 port=0x330 irq=10
alias sound-slot-1 snd-card-1
alias sound-service-1-0 snd-mixer-oss
alias sound-service-1-1 snd-seq-oss
alias sound-service-1-3 snd-pcm-oss
alias sound-service-1-12 snd-pcm-oss
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-slot-1 snd-card-1
alias sound-slot-2 snd-card-2
alias sound-slot-3 snd-card-3
alias sound-slot-4 snd-card-4
alias sound-slot-5 snd-card-5
alias sound-slot-6 snd-card-6
alias sound-slot-7 snd-card-7
above sound-slot-0 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-1 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-2 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-3 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-4 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-5 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-6 snd-pcm-oss snd-mixer-oss snd-seq-oss
above sound-slot-7 snd-pcm-oss snd-mixer-oss snd-seq-oss
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
# Load optional modules above their base modules
above snd-pcm snd-pcm-oss
above snd-mixer snd-mixer-oss
above snd-seq snd-seq-oss snd-seq-midi
above snd-emu10k1 snd-emu10k1-synth
above snd-via82xx snd-seq
# Cause a script to be run after snd-*-synth module initialization
post-install snd-emu8000-synth /lib/alsa/modprobe-post-install
snd-emu8000-synth
post-install snd-emu10k1-synth /lib/alsa/modprobe-post-install
snd-emu10k1-synth
# Cause a script to be run after card driver module initialization
post-install snd-ad1816a /lib/alsa/modprobe-post-install snd-ad1816a
post-install snd-ad1848 /lib/alsa/modprobe-post-install snd-ad1848
post-install snd-ad1889 /lib/alsa/modprobe-post-install snd-ad1889
post-install snd-ali5451 /lib/alsa/modprobe-post-install snd-ali5451
post-install snd-als100 /lib/alsa/modprobe-post-install snd-als100
post-install snd-als4000 /lib/alsa/modprobe-post-install snd-als4000
post-install snd-armaaci /lib/alsa/modprobe-post-install snd-armaaci
post-install snd-asihpi /lib/alsa/modprobe-post-install snd-asihpi
post-install snd-atiixp /lib/alsa/modprobe-post-install snd-atiixp
post-install snd-au1x00 /lib/alsa/modprobe-post-install snd-au1x00
post-install snd-au8810 /lib/alsa/modprobe-post-install snd-au8810
post-install snd-au8820 /lib/alsa/modprobe-post-install snd-au8820
post-install snd-au8830 /lib/alsa/modprobe-post-install snd-au8830
post-install snd-azt2320 /lib/alsa/modprobe-post-install snd-azt2320
post-install snd-azt3328 /lib/alsa/modprobe-post-install snd-azt3328
post-install snd-ca0106 /lib/alsa/modprobe-post-install snd-ca0106
post-install snd-cmi8330 /lib/alsa/modprobe-post-install snd-cmi8330
post-install snd-cmipci /lib/alsa/modprobe-post-install snd-cmipci
post-install snd-cs4231 /lib/alsa/modprobe-post-install snd-cs4231
post-install snd-cs4232 /lib/alsa/modprobe-post-install snd-cs4232
post-install snd-cs4236 /lib/alsa/modprobe-post-install snd-cs4236
post-install snd-cs4281 /lib/alsa/modprobe-post-install snd-cs4281
post-install snd-cs46xx /lib/alsa/modprobe-post-install snd-cs46xx
post-install snd-darla20 /lib/alsa/modprobe-post-install snd-darla20
post-install snd-darla24 /lib/alsa/modprobe-post-install snd-darla24
post-install snd-dt019x /lib/alsa/modprobe-post-install snd-dt019x
post-install snd-echo3g /lib/alsa/modprobe-post-install snd-echo3g
post-install snd-emu10k1x /lib/alsa/modprobe-post-install snd-emu10k1x
post-install snd-ens1370 /lib/alsa/modprobe-post-install snd-ens1370
post-install snd-ens1371 /lib/alsa/modprobe-post-install snd-ens1371
post-install snd-es1688 /lib/alsa/modprobe-post-install snd-es1688
post-install snd-es18xx /lib/alsa/modprobe-post-install snd-es18xx
post-install snd-es1938 /lib/alsa/modprobe-post-install snd-es1938
post-install snd-es1968 /lib/alsa/modprobe-post-install snd-es1968
post-install snd-es968 /lib/alsa/modprobe-post-install snd-es968
post-install snd-fm801 /lib/alsa/modprobe-post-install snd-fm801
post-install snd-fm801-tea575x /lib/alsa/modprobe-post-install
snd-fm801-tea575x
post-install snd-gina20 /lib/alsa/modprobe-post-install snd-gina20
post-install snd-gina24 /lib/alsa/modprobe-post-install snd-gina24
post-install snd-gusclassic /lib/alsa/modprobe-post-install snd-gusclassic
post-install snd-gusextreme /lib/alsa/modprobe-post-install snd-gusextreme
post-install snd-gusmax /lib/alsa/modprobe-post-install snd-gusmax
post-install snd-harmony /lib/alsa/modprobe-post-install snd-harmony
post-install snd-hda-intel /lib/alsa/modprobe-post-install snd-hda-intel
post-install snd-hdsp /lib/alsa/modprobe-post-install snd-hdsp
post-install snd-hdspm /lib/alsa/modprobe-post-install snd-hdspm
post-install snd-ice1712 /lib/alsa/modprobe-post-install snd-ice1712
post-install snd-ice1724 /lib/alsa/modprobe-post-install snd-ice1724
post-install snd-indigo /lib/alsa/modprobe-post-install snd-indigo
post-install snd-indigodj /lib/alsa/modprobe-post-install snd-indigodj
post-install snd-indigoio /lib/alsa/modprobe-post-install snd-indigoio
post-install snd-intel8x0 /lib/alsa/modprobe-post-install snd-intel8x0
post-install snd-interwave /lib/alsa/modprobe-post-install snd-interwave
post-install snd-interwave-stb /lib/alsa/modprobe-post-install
snd-interwave-stb
post-install snd-korg1212 /lib/alsa/modprobe-post-install snd-korg1212
post-install snd-layla20 /lib/alsa/modprobe-post-install snd-layla20
post-install snd-layla24 /lib/alsa/modprobe-post-install snd-layla24
post-install snd-maestro3 /lib/alsa/modprobe-post-install snd-maestro3
post-install snd-mia /lib/alsa/modprobe-post-install snd-mia
post-install snd-miro /lib/alsa/modprobe-post-install snd-miro
post-install snd-mixart /lib/alsa/modprobe-post-install snd-mixart
post-install snd-mona /lib/alsa/modprobe-post-install snd-mona
post-install snd-mpu401 /lib/alsa/modprobe-post-install snd-mpu401
post-install snd-msnd-pinnacle /lib/alsa/modprobe-post-install
snd-msnd-pinnacle
post-install snd-mtpav /lib/alsa/modprobe-post-install snd-mtpav
post-install snd-nm256 /lib/alsa/modprobe-post-install snd-nm256
post-install snd-opl3sa2 /lib/alsa/modprobe-post-install snd-opl3sa2
post-install snd-opti92x-ad1848 /lib/alsa/modprobe-post-install
snd-opti92x-ad1848
post-install snd-opti92x-cs4231 /lib/alsa/modprobe-post-install
snd-opti92x-cs4231
post-install snd-opti93x /lib/alsa/modprobe-post-install snd-opti93x
post-install snd-pc98-cs4232 /lib/alsa/modprobe-post-install snd-pc98-cs4232
post-install snd-pcsp /lib/alsa/modprobe-post-install snd-pcsp
post-install snd-pcxhr /lib/alsa/modprobe-post-install snd-pcxhr
post-install snd-pdaudiocf /lib/alsa/modprobe-post-install snd-pdaudiocf
post-install snd-pdplus /lib/alsa/modprobe-post-install snd-pdplus
post-install snd-portman2x4 /lib/alsa/modprobe-post-install snd-portman2x4
post-install snd-powermac /lib/alsa/modprobe-post-install snd-powermac
post-install snd-pxa2xx-ac97 /lib/alsa/modprobe-post-install snd-pxa2xx-ac97
post-install snd-riptide /lib/alsa/modprobe-post-install snd-riptide
post-install snd-rme32 /lib/alsa/modprobe-post-install snd-rme32
post-install snd-rme96 /lib/alsa/modprobe-post-install snd-rme96
post-install snd-rme9652 /lib/alsa/modprobe-post-install snd-rme9652
post-install snd-s3c2410 /lib/alsa/modprobe-post-install snd-s3c2410
post-install snd-sa11xx-uda1341 /lib/alsa/modprobe-post-install
snd-sa11xx-uda1341
post-install snd-sb16 /lib/alsa/modprobe-post-install snd-sb16
post-install snd-sb8 /lib/alsa/modprobe-post-install snd-sb8
post-install snd-sbawe /lib/alsa/modprobe-post-install snd-sbawe
post-install snd-serialmidi /lib/alsa/modprobe-post-install snd-serialmidi
post-install snd-serial-u16550 /lib/alsa/modprobe-post-install
snd-serial-u16550
post-install snd-sgalaxy /lib/alsa/modprobe-post-install snd-sgalaxy
post-install snd-sonicvibes /lib/alsa/modprobe-post-install snd-sonicvibes
post-install snd-sscape /lib/alsa/modprobe-post-install snd-sscape
post-install snd-sun-amd7930 /lib/alsa/modprobe-post-install snd-sun-amd7930
post-install snd-sun-cs4231 /lib/alsa/modprobe-post-install snd-sun-cs4231
post-install snd-sun-dbri /lib/alsa/modprobe-post-install snd-sun-dbri
post-install snd-trident /lib/alsa/modprobe-post-install snd-trident
post-install snd-usb-audio /lib/alsa/modprobe-post-install snd-usb-audio
post-install snd-usb-usx2y /lib/alsa/modprobe-post-install snd-usb-usx2y
post-install snd-vx222 /lib/alsa/modprobe-post-install snd-vx222
post-install snd-vxpocket /lib/alsa/modprobe-post-install snd-vxpocket
post-install snd-wavefront /lib/alsa/modprobe-post-install snd-wavefront
post-install snd-ymfpci /lib/alsa/modprobe-post-install snd-ymfpci
# Prevent abnormal drivers from grabbing index 0
options snd-bt87x index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
Reply to: