Re:dopo ricompilazione kernel non funge la tastiera [solved]
Tenetevi forte.
Ho collegato una tastiera PS2 e ho fatto il login.
Ho pensato subito "avrò scelto il kernel vecchio... non quello con cui ho
dialogato ieri sera".
Ma per sfizio ho dato un uname -a
AHHHHHHHHHHHHHHHHHHHHH!!!!!!!
Ho aggiornato il Kernel!!!!!! :-))))))))))))))))))
E funziona!!! :-)
Sta sera offro da bere a tutti!!!
Allego la buona nuova. Forse sembrerà eccessivo ma lo vedo come un primo passo
verso la liberazione! ;-)
Ho eseguito anche dmesg come consigliato. E per sfizio ho allegato anche quello.
Sembra che i moduli USB ci siano. Ma
darò una meglio occhiata più tardi.
Alla peggio cmq uso la tastiera PS2 (o l'adattatore della USB) per scoprire come
fare andare direttamente la USB.
Ciao!!!
Linux version 2.4.22 (root@Orion) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Thu Sep 18 00:58:44 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131068
zone(0): 4096 pages.
zone(1): 126972 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=miokernel ro root=301
Initializing CPU#0
Detected 1822.514 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3630.69 BogoMIPS
Memory: 514912k/524272k available (2113k kernel code, 8972k reserved, 843k data, 108k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(TM) XP 2500+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf1990, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/3177] at 00:11.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Coda Kernel/Venus communications, v5.3.18, coda@cs.cmu.edu
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver v1.1.22 [Flags: R/O]
parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
parport0: irq 7 detected
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
lp0: using parport0 (polling).
Non-volatile memory driver v1.2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
CSLIP: code copyright 1989 Regents of the University of California.
SLIP linefill/keepalive option.
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
plip: parport0 has no IRQ. Using IRQ-less mode,which is fairly inefficient!
NET3 PLIP version 2.4-parport gniibe@mri.co.jp
plip0: Parallel port at 0x378, not using IRQ.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: unable to determine aperture size.
[drm] Initialized tdfx 1.0.0 20010216 on minor 0
[drm] Initialized radeon 1.1.1 20010405 on minor 1
[drm:drm_init] *ERROR* Cannot initialize the agpgart module.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: MAXTOR 6L040J2, ATA DISK drive
hdb: Maxtor 6Y080L0, ATA DISK drive
hdc: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive
hdd: HL-DT-STDVD-ROM GDR8161B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: setmax LBA 78177792, native 66055248
hda: 66055248 sectors (33820 MB) w/1819KiB Cache, CHS=4111/255/63
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=9964/255/63
hdc: attached ide-cdrom driver.
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache
Uniform CD-ROM driver Revision: 3.12
hdd: attached ide-cdrom driver.
hdd: ATAPI 48X DVD-ROM drive, 256kB Cache
Partition check:
hda: hda1 hda2
hdb: hdb1 hdb2 < hdb5 >
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Via 686a/8233/8235 audio driver 1.9.1-ac3
PCI: Found IRQ 4 for device 00:11.5
IRQ routing conflict for 00:11.5, have irq 3, want irq 4
via82cxxx: Six channel audio available
PCI: Setting latency timer of device 00:11.5 to 64
via82cxxx: timeout while reading AC97 codec (0x8000000)
ac97_codec: AC97 Audio codec, id: ADS112 (Unknown)
via82cxxx: board #1 at 0xE000, IRQ 3
es1371: version v0.32 time 00:59:50 Sep 18 2003
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
host/uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 3 for device 00:10.0
IRQ routing conflict for 00:10.0, have irq 10, want irq 3
IRQ routing conflict for 00:10.1, have irq 10, want irq 3
IRQ routing conflict for 00:10.2, have irq 10, want irq 3
IRQ routing conflict for 00:10.3, have irq 10, want irq 3
host/uhci.c: USB UHCI at I/O 0xb800, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:10.1
IRQ routing conflict for 00:10.0, have irq 10, want irq 3
IRQ routing conflict for 00:10.1, have irq 10, want irq 3
IRQ routing conflict for 00:10.2, have irq 10, want irq 3
IRQ routing conflict for 00:10.3, have irq 10, want irq 3
host/uhci.c: USB UHCI at I/O 0xb400, IRQ 10
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 3 for device 00:10.2
IRQ routing conflict for 00:10.0, have irq 10, want irq 3
IRQ routing conflict for 00:10.1, have irq 10, want irq 3
IRQ routing conflict for 00:10.2, have irq 10, want irq 3
IRQ routing conflict for 00:10.3, have irq 10, want irq 3
host/uhci.c: USB UHCI at I/O 0xb000, IRQ 10
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver usbscanner
scanner.c: 0.4.13:USB Scanner Driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ds: no socket drivers loaded!
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 108k freed
Adding Swap: 979956k swap-space (priority -1)
spurious 8259A interrupt: IRQ7.
Linux Orion 2.4.22 #1 Thu Sep 18 00:58:44 CEST 2003 i686 unknown
Reply to: