[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: 735 does not found a bootdev after install



jmd wrote:

> not sure if the firmware is similar or not but when i interrupt the boot
> process and get the firmware prompt i type:
> 
> BO P1 (BO=boot and P1=my scsi disk)

It's not the first time i worked with an Apollo (but, the first time with
linux..). At least, the machine should found sth. which is P1... but there
is only _one_ boot device... my rbootd server => P0 and nothing more (why
i have to repeat myself that often?) no scsi disk, nothing only my
netboothost i installed from.

to make it clear:

root@kartoffel olivleh1> kermit
C-Kermit 7.0.197, 8 Feb 2000, for FreeBSD
 Copyright (C) 1985, 2000,
  Trustees of Columbia University in the City of New York.
Type ? or HELP for help.
(/usr/home/olivleh1/) C-Kermit>set line /dev/cuaa0         
(/usr/home/olivleh1/) C-Kermit>set speed 9600              
/dev/cuaa0, 9600 bps
(/usr/home/olivleh1/) C-Kermit>set parity none             
(/usr/home/olivleh1/) C-Kermit>set flow rts/cts            
(/usr/home/olivleh1/) C-Kermit>set terminal bytesize 8     
(/usr/home/olivleh1/) C-Kermit>connect
Connecting to /dev/cuaa0, speed 9600.
The escape character is Ctrl-\ (ASCII 28, FS)
Type the escape character followed by C to get back,
or followed by ? to see other options.
----------------------------------------------------



(c) Copyright.  Hewlett-Packard Company.  1992.
All rights reserved.

PDC ROM rev. 2.7
IODC ROM rev. 1.1
144 MB of memory configured and tested.


Selecting a system to boot.
To stop selection process, press and hold the ESCAPE key.

Selection process stopped.

Searching for Potential Boot Devices.
To terminate search, press and hold the ESCAPE key.

Device Selection      Device Path              Device Type
-------------------------------------------------------------------------
---

P0                    lan.006097-393a76.0.0    gurke



b)    Boot from specified device
s)    Search for bootable devices
a)    Enter Boot Administration mode
x)    Exit and continue boot sequence
?)    Help

Select from menu: a
BOOT_ADMIN> boot scsi
                     
Trying scsi.0.0
Failed to initialize scsi.0.0
ENTRY_INIT status = -7

80040000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 
0000350B 00000012 FF00473F 80200000 800100DC 00000000 0021F000 00000400 
9E030000 FFFFFF02 0000A1B8 F0002898 FFFFFFFF 00000000 00000000 00000000 


Searching for Potential Boot Devices.
To terminate search, press and hold the ESCAPE key.

[and so on]


-- 
Oliver Lehmann, lehmann@ans-netz.de, http://www.pofo.de/
  http://wishlist.pofo.de/



Reply to: