[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Debian on embedded...

On Sun, 2004-05-09 at 15:47, rvt@dds.nl wrote:
> Hey Justin,
> the error I receive is:
>    no DRQ after issuing WRITE
>    ide0 reset: success
> And after a few minutes to a few hours or when the system is under higher load. 
> (copying large files is enough) I get that error.
> My kernel where all i386 kernels, currently I try a 2.4.26 kernel epcially for 
> the crusoe processor. It might be so that the frequency (longrun system) is not 
> set correctly so I'll try that first.....

hmm, you still didnt say what the device was. Sounds like either it has
problem or there are quirks with your ide chipset. output of lspci and
kernel config might help.


Reply to: