Re: AW: Re: AW: Re: debian 10 installation fails
Hi,
Matthias Zillmer <mzillmer@alice-dsl.net> wrote:
> The image was not corrupted because after download I have checked the shasum -a 256 and it was the same as on your web page.
>
> I have burned it to another CD and now it worked (the same as Debian 10 installer). I still think it had some problems reading before and after the "framebuffer" message appeared.
Ok, fine.
I consider this case being closed then.
Holger
> The first CD I used was the one (CD-RW) which I used for Debian 10.
> Now I have written again Debian 10 to this CD and it works much more smoothly. After I start expertgui noapic acpi=off it needs also some time, but when the "framebuffer" message appears, then it continues very fast and shows some info before switching to the graphical installer.
> So the Debian 10 installer was running smoother than the 11,
> and anyway the Debian 9 and 8 were better for my hardware.
>
> Matthias
>
>
>
> Am Fri, 27 Mar 2020 21:07:20 +0100, Holger Wansing <hwansing@mailbox.org> schrieb:
>
> Hi,
>
> Matthias Zillmer wrote:
> > I see the boot screen, choose "help", F3 or F6, I type expertgui (or install) noapic acpi=off
> >
> > Loading /install.amd/vmlinuz ... ok
> > Loading /install.amd/gtk/initrd.gz ...
> >
> > The DVD drive LED is blinking but nothing happens on the screen for 10 minutes
> >
> > Not possible to switch to another screen with ctrl-alt-f2 or f3 or f4
>
> Are you sure the disk was burned correctly?
> Is it possible, that the disk is damaged? Try another one to make sure?
> Or maybe the downloaded image got corrupted, during download for example?
> Download another one?
>
>
> Holger
>
>
>
> > Am Fri, 27 Mar 2020 19:29:33 +0100, Holger Wansing schrieb:
> >
> > Hi,
> >
> > Matthias Zillmer wrote:
> > > Hi Holger,
> > >
> > > I have got the Debian 10 installer running by using the 10.3.0 amd64 xfce CD1 iso image and with
> > >
> > > Help
> > > F3
> > > expertgui noapic acpi=off
> > >
> > > Then "Trying to enable frame buffer" and I can continue with installation.
> > >
> > > I don't know if there is a hint somewhere under "Help" to use these parameters for (older) hardware.
> >
> > Yes, that boot parameters were mentioned various times for similar cases.
> > They are documented on help page F6.
> >
> > > This does not work with your Debian 11 bullseye DI alpha2 amd 64 xfce cd1 image.
> > > It continues reading from the CD drive but nothing happens on the screen for more than 5 minutes.
> >
> > At which step did the hang happen? Did you saw the Debian boot screen like
> >
> > Debian GNU/Linux installer menu
> > Graphical install
> > Install
> > Advanced options >
> > Accessible dark contrast installer menu >
> > Help
> >
> > and it hangs after hitting "Graphical install" for example ?
> >
> > Or did it fail to show the boot screen at all ?
> >
> > Could you try to find additional debugging info at the second console via
> > Alt+F2 ?
> >
> >
> > Holger
> >
> >
> >
> > --
> > Holger Wansing
> > PGP-Fingerprint: 496A C6E8 1442 4B34 8508 3529 59F1 87CA 156E B076
> >
>
>
> --
> Holger Wansing
> PGP-Fingerprint: 496A C6E8 1442 4B34 8508 3529 59F1 87CA 156E B076
>
--
Holger Wansing <hwansing@mailbox.org>
PGP-Fingerprint: 496A C6E8 1442 4B34 8508 3529 59F1 87CA 156E B076
Reply to: