[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#472487: additional info



Hello,

On Wed, 2 Apr 2008 16:44:37 +0200 Frans Pop wrote:
> > Yes. Auto-detecting the cdrom drive works this way.
> 
> OK. That at least identifies the problem, though reverting that change would 
> not solve all problems as initramfs-tools would still need to be made to 
> load the driver.
> 
> What we basically need to do here is find a way to identify this type of 
> system so we can automate the loading of ide-generic.
> 
> BTW, doesn't the installer offer to load additional drivers when it fails to 
> detect the CD? If it does, what are the dialogs that are displayed?

1. 	No common CD-ROM drive was detected.
	You may need to load additional CD-ROM drivers from a
	driver floppy...
	Load CD-ROM drivers from a driver floppy?
	Yes		No
[Answered with No.]

2.	No common CD-ROM drive was detected.
	Your CD-ROM drive may be an old Mitsumi or another non-IDE,
	non-SCSI CD-ROM drive. ...
	Manually select a CD-ROM module and device?
	Yes		No
[Answered with No.]

3.	An installation step failed.
	You can try to run the failing item again from the menu, or
	skip it and choose something else...
		Continue


> Could you also do the following:
> - boot the installer
> - proceed until the CD fails to be recognized
> - switch to VT2
> - what is the output of the following commands at that point:
>   - ls /proc/bus/*
>   - ls /sys/bus
>   - cat /proc/interrupts
>   - cat /proc/iomem
>   - cat /proc/ioports
> - enter the following commands:
>   - logger -t DEBUG "Before loading ide-generic"
>   - modprobe ide-generic
> - send the /var/log/syslog at this point
> - is there any change in the output of the commands above after that?


Output of: 	ls /proc/bus/*

/proc/bus/input:
devices
handlers

/proc/bus/pccard:
drivers

/proc/bus/pci:
00
devices

/proc/bus/usb:



Output of:	ls /sys/bus

MCA
acpi
eisa
ide
isa
pci
pci_express
pcmcia
platform
pnp
scsi
serio
spi
usb



Output of:	cat /proc/interrupts

           CPU0       
  0:      25005    XT-PIC-XT        timer
  1:        476    XT-PIC-XT        i8042
  2:          0    XT-PIC-XT        cascade
  6:          3    XT-PIC-XT        floppy
  7:          3    XT-PIC-XT        parport0
 11:          0    XT-PIC-XT        yenta, yenta, ohci_hcd:usb1
 12:          4    XT-PIC-XT        i8042
 13:         26    XT-PIC-XT        acpi
NMI:          0 
LOC:          0 
ERR:          0
MIS:          0



Output of:	cat /proc/iomem

00000000-0009fbff : System RAM
  00000000-00000000 : Crash kernel
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c97ff : Video ROM
000f0000-000fffff : System ROM
00100000-0200ffff : System RAM
  00100000-0029e27a : Kernel code
  0029e27b-00340cc3 : Kernel data
02010000-0201ffff : ACPI Tables
02020000-0203ffff : reserved
10000000-13ffffff : PCI CardBus #01
14000000-17ffffff : PCI CardBus #01
18000000-1bffffff : PCI CardBus #05
1c000000-1fffffff : PCI CardBus #05
20000000-2003ffff : 0000:00:04.0
20040000-20040fff : 0000:00:13.0
  20040000-20040fff : yenta_socket
20041000-20041fff : 0000:00:13.1
  20041000-20041fff : yenta_socket
fcfff000-fcffffff : 0000:00:0b.0
  fcfff000-fcffffff : ohci_hcd
fd000000-fdffffff : 0000:00:04.0
fef80000-feffffff : reserved
fffe0000-fffe6dff : reserved
fffe6e00-fffe6fff : ACPI Non-volatile Storage
fffe7000-ffffffff : reserved



Output of:	cat /proc/ioports

0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0378-037a : parport0
03c0-03df : vga+
03f2-03f5 : floppy
03f7-03f7 : floppy DIR
03f8-03ff : serial
0778-077a : parport0
0cf8-0cff : PCI conf1
1000-10ff : PCI CardBus #01
1400-14ff : PCI CardBus #01
1800-18ff : PCI CardBus #05
  18a0-18a3 : ACPI PM1a_EVT_BLK
  18a4-18a5 : ACPI PM1a_CNT_BLK
  18a6-18a6 : ACPI PM2_CNT_BLK
  18a8-18ab : ACPI PM_TMR
  18ac-18af : ACPI GPE0_BLK
  18b0-18b5 : ACPI CPU throttle
1c00-1cff : PCI CardBus #05
ffe0-ffff : 0000:00:11.0



[Executed "logger -t DEBUG "Before loading ide-generic"
  and "modprobe ide-generic" ]

After that:
Output of:	/var/log/syslog
	[see attached file "syslog" ]


Output of:	ls /proc/bus/*
	[the same as above]


Output of:	ls /sys/bus
	[the same as above]


Output of:	cat /proc/interrupts

           CPU0       
  0:      31540    XT-PIC-XT        timer
  1:       1095    XT-PIC-XT        i8042
  2:          0    XT-PIC-XT        cascade
  6:          3    XT-PIC-XT        floppy
  7:          3    XT-PIC-XT        parport0
 11:          0    XT-PIC-XT        yenta, yenta, ohci_hcd:usb1
 12:          4    XT-PIC-XT        i8042
 13:         36    XT-PIC-XT        acpi
 14:        491    XT-PIC-XT        ide0
 15:         27    XT-PIC-XT        ide1
NMI:          0 
LOC:          0 
ERR:          0
MIS:          0



Output of:	cat /proc/iomem
	[the same as above]


Output of:	cat /proc/ioports

0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f2-03f5 : floppy
03f6-03f6 : ide0
03f7-03f7 : floppy DIR
03f8-03ff : serial
0778-077a : parport0
0cf8-0cff : PCI conf1
1000-10ff : PCI CardBus #01
1400-14ff : PCI CardBus #01
1800-18ff : PCI CardBus #05
  18a0-18a3 : ACPI PM1a_EVT_BLK
  18a4-18a5 : ACPI PM1a_CNT_BLK
  18a6-18a6 : ACPI PM2_CNT_BLK
  18a8-18ab : ACPI PM_TMR
  18ac-18af : ACPI GPE0_BLK
  18b0-18b5 : ACPI CPU throttle
1c00-1cff : PCI CardBus #05
ffe0-ffff : 0000:00:11.0




-- 
Kind regards
Holger

==============================================================
Created with Sylpheed 2.3.0
    under THE NEW DEBIAN GNU/LINUX 4.0 »Etch«
        http://counter.li.org/,  Registered LinuxUser #311290
Try out OpenGL 3D-Desktop Beryl! www.beryl-project.org
=============================================================

Jun 13 11:30:57 syslogd started: BusyBox v1.1.3
Jun 13 11:30:57 kernel: klogd started: BusyBox v1.1.3 (Debian 1:1.1.3-5)
Jun 13 11:30:57 kernel: Linux version 2.6.22-3-486 (Debian 2.6.22-6) (maks@debian.org) (gcc version 4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 Mon Nov 12 07:53:08 UTC 2007
Jun 13 11:30:57 kernel: BIOS-provided physical RAM map:
Jun 13 11:30:57 kernel:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Jun 13 11:30:57 kernel:  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Jun 13 11:30:57 kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jun 13 11:30:57 kernel:  BIOS-e820: 0000000000100000 - 0000000002010000 (usable)
Jun 13 11:30:57 kernel:  BIOS-e820: 0000000002010000 - 0000000002020000 (ACPI data)
Jun 13 11:30:57 kernel:  BIOS-e820: 0000000002020000 - 0000000002040000 (reserved)
Jun 13 11:30:57 kernel:  BIOS-e820: 00000000fef80000 - 00000000ff000000 (reserved)
Jun 13 11:30:57 kernel:  BIOS-e820: 00000000fffe0000 - 00000000fffe6e00 (reserved)
Jun 13 11:30:57 kernel:  BIOS-e820: 00000000fffe6e00 - 00000000fffe7000 (ACPI NVS)
Jun 13 11:30:57 kernel:  BIOS-e820: 00000000fffe7000 - 0000000100000000 (reserved)
Jun 13 11:30:57 kernel: 32MB LOWMEM available.
Jun 13 11:30:57 kernel: Entering add_active_range(0, 0, 8208) 0 entries of 256 used
Jun 13 11:30:57 kernel: Zone PFN ranges:
Jun 13 11:30:57 kernel:   DMA             0 ->     4096
Jun 13 11:30:57 kernel:   Normal       4096 ->     8208
Jun 13 11:30:57 kernel: early_node_map[1] active PFN ranges
Jun 13 11:30:57 kernel:     0:        0 ->     8208
Jun 13 11:30:57 kernel: On node 0 totalpages: 8208
Jun 13 11:30:57 kernel:   DMA zone: 32 pages used for memmap
Jun 13 11:30:57 kernel:   DMA zone: 0 pages reserved
Jun 13 11:30:57 kernel:   DMA zone: 4064 pages, LIFO batch:0
Jun 13 11:30:57 kernel:   Normal zone: 32 pages used for memmap
Jun 13 11:30:57 kernel:   Normal zone: 4080 pages, LIFO batch:0
Jun 13 11:30:57 kernel: DMI not present or invalid.
Jun 13 11:30:57 kernel: ACPI: RSDP 000F4850, 0014 (r0 TOSHIB)
Jun 13 11:30:57 kernel: ACPI: RSDT 02010000, 0028 (r1 TOSHIB 750      19980225 TASM  4010000)
Jun 13 11:30:57 kernel: ACPI: FACP 02010054, 0074 (r1 TOSHIB 750      19980225 TASM  4010000)
Jun 13 11:30:57 kernel: ACPI: DSDT 020100C8, 489F (r1 TOSHIB 300      19990601 MSFT  100000B)
Jun 13 11:30:57 kernel: ACPI: FACS FFFE6E00, 0040
Jun 13 11:30:57 kernel: ACPI: PM-Timer IO Port: 0x18a8
Jun 13 11:30:57 kernel: Allocating PCI resources starting at 10000000 (gap: 02040000:fcf40000)
Jun 13 11:30:57 kernel: Built 1 zonelists.  Total pages: 8144
Jun 13 11:30:57 kernel: Kernel command line: vga=normal initrd=/install.386/initrd.gz rescue/enable=true -- quiet BOOT_IMAGE=/install.386/vmlinuz 
Jun 13 11:30:57 kernel: No local APIC present or hardware disabled
Jun 13 11:30:57 kernel: mapped APIC to ffffd000 (01049000)
Jun 13 11:30:57 kernel: Initializing CPU#0
Jun 13 11:30:57 kernel: PID hash table entries: 128 (order: 7, 512 bytes)
Jun 13 11:30:57 kernel: Detected 233.291 MHz processor.
Jun 13 11:30:57 kernel: Console: colour VGA+ 80x25
Jun 13 11:30:57 kernel: Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Jun 13 11:30:57 kernel: Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Jun 13 11:30:57 kernel: Memory: 25068k/32832k available (1656k kernel code, 7376k reserved, 650k data, 316k init, 0k highmem)
Jun 13 11:30:57 kernel: virtual kernel memory layout:
Jun 13 11:30:57 kernel:     fixmap  : 0xfffb5000 - 0xfffff000   ( 296 kB)
Jun 13 11:30:57 kernel:     vmalloc : 0xc3000000 - 0xfffb3000   ( 975 MB)
Jun 13 11:30:57 kernel:     lowmem  : 0xc0000000 - 0xc2010000   (  32 MB)
Jun 13 11:30:57 kernel:       .init : 0xc0344000 - 0xc0393000   ( 316 kB)
Jun 13 11:30:57 kernel:       .data : 0xc029e27b - 0xc0340cc4   ( 650 kB)
Jun 13 11:30:57 kernel:       .text : 0xc0100000 - 0xc029e27b   (1656 kB)
Jun 13 11:30:57 kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jun 13 11:30:57 kernel: Calibrating delay using timer specific routine.. 467.44 BogoMIPS (lpj=934880)
Jun 13 11:30:57 kernel: Security Framework v1.0.0 initialized
Jun 13 11:30:57 kernel: SELinux:  Disabled at boot.
Jun 13 11:30:57 kernel: Capability LSM initialized
Jun 13 11:30:57 kernel: Mount-cache hash table entries: 512
Jun 13 11:30:57 kernel: CPU: After generic identify, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000
Jun 13 11:30:57 kernel: Intel Pentium with F0 0F bug - workaround enabled.
Jun 13 11:30:57 kernel: 
Jun 13 11:30:57 kernel: CPU: After all inits, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000
Jun 13 11:30:57 kernel: Compat vDSO mapped to ffffe000.
Jun 13 11:30:57 kernel: CPU: Intel Mobile Pentium MMX stepping 01
Jun 13 11:30:57 kernel: Checking 'hlt' instruction... OK.
Jun 13 11:30:57 kernel: ACPI: Core revision 20070126
Jun 13 11:30:57 kernel: ACPI: setting ELCR to 2000 (from 0804)
Jun 13 11:30:57 kernel: Booting paravirtualized kernel on bare hardware
Jun 13 11:30:57 kernel: NET: Registered protocol family 16
Jun 13 11:30:57 kernel: EISA bus registered
Jun 13 11:30:57 kernel: ACPI: bus type pci registered
Jun 13 11:30:57 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd4ce, last bus=21
Jun 13 11:30:57 kernel: PCI: Using configuration type 1
Jun 13 11:30:57 kernel: Setting up standard PCI resources
Jun 13 11:30:57 kernel: ACPI: Interpreter enabled
Jun 13 11:30:57 kernel: ACPI: (supports S0 S1 S3 S4 S5)
Jun 13 11:30:57 kernel: ACPI: Using PIC for interrupt routing
Jun 13 11:30:57 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Jun 13 11:30:57 kernel: PCI: Probing PCI hardware (bus 00)
Jun 13 11:30:57 kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jun 13 11:30:57 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Jun 13 11:30:57 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Jun 13 11:30:57 kernel: >ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Jun 13 11:30:57 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Jun 13 11:30:57 kernel: ACPI: Power Resource [PFAN] (off)
Jun 13 11:30:57 kernel: ACPI: Power Resource [SFAN] (off)
Jun 13 11:30:57 kernel: ACPI: Power Resource [PWH1] (on)
Jun 13 11:30:57 kernel: ACPI: Power Resource [PWH2] (on)
Jun 13 11:30:57 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Jun 13 11:30:57 kernel: pnp: PnP ACPI init
Jun 13 11:30:57 kernel: ACPI: bus type pnp registered
Jun 13 11:30:57 kernel: PCI: setting IRQ 13 as level-triggered
Jun 13 11:30:57 kernel: pnp: PnP ACPI: found 15 devices
Jun 13 11:30:57 kernel: ACPI: ACPI bus type pnp unregistered
Jun 13 11:30:57 kernel: PnPBIOS: Disabled by ACPI PNP
Jun 13 11:30:57 kernel: PCI: Using ACPI for IRQ routing
Jun 13 11:30:57 kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Jun 13 11:30:57 kernel: NET: Registered protocol family 8
Jun 13 11:30:57 kernel: NET: Registered protocol family 20
Jun 13 11:30:57 kernel: ACPI: RTC can wake from S4
Jun 13 11:30:57 kernel: pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
Jun 13 11:30:57 kernel: pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
Jun 13 11:30:57 kernel: pnp: 00:00: iomem range 0x100000-0x200ffff could not be reserved
Jun 13 11:30:57 kernel: pnp: 00:00: iomem range 0x2010000-0x203ffff could not be reserved
Jun 13 11:30:57 kernel: Time: tsc clocksource has been installed.
Jun 13 11:30:57 kernel: PCI: Bus 1, cardbus bridge: 0000:00:13.0
Jun 13 11:30:57 kernel:   IO window: 00001000-000010ff
Jun 13 11:30:57 kernel:   IO window: 00001400-000014ff
Jun 13 11:30:57 kernel:   PREFETCH window: 10000000-13ffffff
Jun 13 11:30:57 kernel:   MEM window: 14000000-17ffffff
Jun 13 11:30:57 kernel: PCI: Bus 5, cardbus bridge: 0000:00:13.1
Jun 13 11:30:57 kernel:   IO window: 00001800-000018ff
Jun 13 11:30:57 kernel:   IO window: 00001c00-00001cff
Jun 13 11:30:57 kernel:   PREFETCH window: 18000000-1bffffff
Jun 13 11:30:57 kernel:   MEM window: 1c000000-1fffffff
Jun 13 11:30:57 kernel: PCI: Enabling device 0000:00:13.0 (0000 -> 0003)
Jun 13 11:30:57 kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
Jun 13 11:30:57 kernel: PCI: setting IRQ 11 as level-triggered
Jun 13 11:30:57 kernel: ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
Jun 13 11:30:57 kernel: PCI: Setting latency timer of device 0000:00:13.0 to 64
Jun 13 11:30:57 kernel: PCI: Enabling device 0000:00:13.1 (0000 -> 0003)
Jun 13 11:30:57 kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Jun 13 11:30:57 kernel: ACPI: PCI Interrupt 0000:00:13.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
Jun 13 11:30:57 kernel: PCI: Setting latency timer of device 0000:00:13.1 to 64
Jun 13 11:30:57 kernel: NET: Registered protocol family 2
Jun 13 11:30:57 kernel: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
Jun 13 11:30:57 kernel: TCP established hash table entries: 1024 (order: 1, 8192 bytes)
Jun 13 11:30:57 kernel: TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
Jun 13 11:30:57 kernel: TCP: Hash tables configured (established 1024 bind 1024)
Jun 13 11:30:57 kernel: TCP reno registered
Jun 13 11:30:57 kernel: checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
Jun 13 11:30:57 kernel:  it is
Jun 13 11:30:57 kernel: Freeing initrd memory: 4153k freed
Jun 13 11:30:57 kernel: audit: initializing netlink socket (disabled)
Jun 13 11:30:57 kernel: audit(1181734252.324:1): initialized
Jun 13 11:30:57 kernel: VFS: Disk quotas dquot_6.5.1
Jun 13 11:30:57 kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun 13 11:30:57 kernel: io scheduler noop registered
Jun 13 11:30:57 kernel: io scheduler anticipatory registered
Jun 13 11:30:57 kernel: io scheduler deadline registered
Jun 13 11:30:57 kernel: io scheduler cfq registered (default)
Jun 13 11:30:57 kernel: Boot video device is 0000:00:04.0
Jun 13 11:30:57 kernel: isapnp: Scanning for PnP cards...
Jun 13 11:30:57 kernel: isapnp: No Plug & Play device found
Jun 13 11:30:57 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jun 13 11:30:57 kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 13 11:30:57 kernel: 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 13 11:30:57 kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Jun 13 11:30:57 kernel: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jun 13 11:30:57 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 13 11:30:57 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 13 11:30:57 kernel: mice: PS/2 mouse device common for all mice
Jun 13 11:30:57 kernel: EISA: Probing bus 0 at eisa.0
Jun 13 11:30:57 kernel: Cannot allocate resource for EISA slot 1
Jun 13 11:30:57 kernel: EISA: Detected 0 cards.
Jun 13 11:30:57 kernel: TCP bic registered
Jun 13 11:30:57 kernel: NET: Registered protocol family 1
Jun 13 11:30:57 kernel: NET: Registered protocol family 17
Jun 13 11:30:57 kernel: Using IPI Shortcut mode
Jun 13 11:30:57 kernel: Freeing unused kernel memory: 316k freed
Jun 13 11:30:57 kernel: input: AT Translated Set 2 keyboard as /class/input/input0
Jun 13 11:30:57 kernel: Yenta: CardBus bridge found at 0000:00:13.0 [1179:0001]
Jun 13 11:30:57 kernel: Yenta: ISA IRQ mask 0x06b8, PCI irq 11
Jun 13 11:30:57 kernel: Socket status: 30000007
Jun 13 11:30:57 kernel: Yenta: CardBus bridge found at 0000:00:13.1 [1179:0001]
Jun 13 11:30:57 kernel: Yenta: ISA IRQ mask 0x06b8, PCI irq 11
Jun 13 11:30:57 kernel: Socket status: 30000007
Jun 13 11:30:57 kernel: usbcore: registered new interface driver usbfs
Jun 13 11:30:57 kernel: usbcore: registered new interface driver hub
Jun 13 11:30:57 kernel: usbcore: registered new device driver usb
Jun 13 11:30:57 kernel: st 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Jun 13 11:30:57 kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Jun 13 11:30:57 kernel: ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Jun 13 11:30:57 kernel: ohci_hcd 0000:00:0b.0: OHCI Host Controller
Jun 13 11:30:57 kernel: ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
Jun 13 11:30:57 kernel: ohci_hcd 0000:00:0b.0: irq 11, io mem 0xfcfff000
Jun 13 11:30:57 kernel: Floppy drive(s): fd0 is 1.44M
Jun 13 11:30:57 kernel: usb usb1: configuration #1 chosen from 1 choice
Jun 13 11:30:57 kernel: hub 1-0:1.0: USB hub found
Jun 13 11:30:57 kernel: hub 1-0:1.0: 2 ports detected
Jun 13 11:30:57 kernel: parport_pc 00:0d: reported by Plug and Play ACPI
Jun 13 11:30:57 kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Jun 13 11:30:57 kernel: FDC 0 is an 8272A
Jun 13 11:30:57 kernel: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x220-0x22f 0x330-0x337 0x370-0x37f 0x388-0x38f
Jun 13 11:30:57 kernel: cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7
Jun 13 11:30:57 kernel: cs: IO port probe 0x820-0x8ff: clean.
Jun 13 11:30:57 kernel: cs: IO port probe 0xc00-0xcf7: clean.
Jun 13 11:30:57 kernel: cs: IO port probe 0xa00-0xaff: clean.
Jun 13 11:30:57 kernel: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x220-0x22f 0x330-0x337 0x370-0x37f 0x388-0x38f
Jun 13 11:30:57 kernel: cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f 0x4d0-0x4d7
Jun 13 11:30:57 kernel: cs: IO port probe 0x820-0x8ff: clean.
Jun 13 11:30:57 kernel: cs: IO port probe 0xc00-0xcf7: clean.
Jun 13 11:30:57 kernel: cs: IO port probe 0xa00-0xaff: clean.
Jun 13 11:30:57 kernel: ACPI: Transitioning device [FAN] to D3
Jun 13 11:30:57 kernel: ACPI: Transitioning device [FAN] to D3
Jun 13 11:30:57 kernel: ACPI: Fan [FAN] (off)
Jun 13 11:30:57 kernel: ACPI: Transitioning device [FNS] to D3
Jun 13 11:30:57 kernel: ACPI: Transitioning device [FNS] to D3
Jun 13 11:30:57 kernel: ACPI: Fan [FNS] (off)
Jun 13 11:30:57 kernel: ACPI: Processor [CPU0] (supports 16 throttling states)
Jun 13 11:30:57 kernel: ACPI: Thermal Zone [THRM] (27 C)
Jun 13 11:30:58 lowmem: Entering low memory mode
Jun 13 11:31:00 anna-install: Queueing udeb lowmem for later installation
Jun 13 11:31:00 frontend: Obsolete command TITLE Low memory called
Jun 13 11:31:11 anna-install: Queueing udeb rescue-mode for later installation
Jun 13 11:31:11 init: Starting pid 860, console /dev/tty1: '/sbin/debian-installer'
Jun 13 11:31:11 init: Starting pid 863, console /dev/tty4: '/usr/bin/tail'
Jun 13 11:31:11 debconf: Setting debconf/language to en
Jun 13 11:31:11 main-menu[899]: DEBUG: resolver (libc6): package doesn't exist (ignored) 
Jun 13 11:31:12 main-menu[899]: INFO: Menu item 'localechooser' selected 
Jun 13 11:31:12 debconf: Setting debconf/language to en
Jun 13 11:31:12 localechooser: info: Locale has been preseeded to C
Jun 13 11:31:12 localechooser: info: Set languagechooser/language-name-latin = 'C'
Jun 13 11:31:12 localechooser: info: LANGNAME=C
Jun 13 11:31:12 localechooser: info: line=C;0;en;;C;
Jun 13 11:31:12 localechooser: info: Set debian-installer/language = 'en'
Jun 13 11:31:12 localechooser: info: Set debian-installer/locale = 'C'
Jun 13 11:31:12 localechooser: info: Set debian-installer/fallbacklocale = 'C'
Jun 13 11:31:12 localechooser: info: No default country; preserving current value ''
Jun 13 11:31:12 localechooser: info: Set debian-installer/consoledisplay = ''
Jun 13 11:31:12 debconf: Setting debconf/language to en
Jun 13 11:31:12 localechooser: info: Set debconf/language = 'en'
Jun 13 11:31:24 localechooser: info: Set debian-installer/country = 'DE'
Jun 13 11:31:24 localechooser: info: Set debian-installer/locale = 'C'
Jun 13 11:31:24 main-menu[899]: DEBUG: resolver (libc6): package doesn't exist (ignored) 
Jun 13 11:31:24 main-menu[899]: INFO: Menu item 'kbd-chooser' selected 
Jun 13 11:31:24 main-menu[899]: INFO: Falling back to the package description for console-keymaps-at 
Jun 13 11:31:24 main-menu[899]: INFO: Falling back to the package description for console-keymaps-at 
Jun 13 11:31:24 kbd-chooser[1102]: DEBUG: Mounting usbdevfs to look for kbd  
Jun 13 11:31:24 kbd-chooser[1102]: DEBUG: Parsing /proc/bus/usb/devices  
Jun 13 11:31:24 kbd-chooser[1102]: DEBUG: Adding generic entry for AT keymaps  
Jun 13 11:31:24 kbd-chooser[1102]: INFO: keyboard type at: present: true:    
Jun 13 11:31:24 kbd-chooser[1102]: INFO: keyboard type at: present: unknown    
Jun 13 11:31:24 kbd-chooser[1102]: INFO: Setting debian-installer/serial-console to false 
Jun 13 11:31:24 kbd-chooser[1102]: INFO: Setting debian-installer/uml-console to false 
Jun 13 11:31:24 kbd-chooser[1102]: INFO: kbd-chooser: arch at selected 
Jun 13 11:31:26 kbd-chooser[1102]: INFO: choose_keymap: keymap = de-latin1-nodeadkeys 
Jun 13 11:31:26 kbd-chooser[1102]: INFO: kbd_chooser: setting keymap de-latin1-nodeadkeys 
Jun 13 11:31:26 main-menu[899]: DEBUG: resolver (libc6): package doesn't exist (ignored) 
Jun 13 11:31:26 main-menu[899]: INFO: Menu item 'cdrom-detect' selected 
Jun 13 11:31:27 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Jun 13 11:31:29 hw-detect: Detected module 'usb-storage' for 'USB storage'
Jun 13 11:31:30 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jun 13 11:31:30 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jun 13 11:31:30 kernel: ide0: generic PnP IDE interface
Jun 13 11:31:30 kernel: ide1: generic PnP IDE interface
Jun 13 11:31:30 hw-detect: insmod /lib/modules/2.6.22-3-486/kernel/drivers/ide/ide-core.ko 
Jun 13 11:31:30 kernel: SCSI subsystem initialized
Jun 13 11:31:30 kernel: Initializing USB Mass Storage driver...
Jun 13 11:31:30 kernel: usbcore: registered new interface driver usb-storage
Jun 13 11:31:30 kernel: USB Mass Storage support registered.
Jun 13 11:31:30 hw-detect: insmod /lib/modules/2.6.22-3-486/kernel/drivers/scsi/scsi_mod.ko 
Jun 13 11:31:30 hw-detect: insmod /lib/modules/2.6.22-3-486/kernel/drivers/usb/storage/usb-storage.ko 
Jun 13 11:31:30 hw-detect: PCMCIA bridge driver already present in kernel
Jun 13 11:31:30 hw-detect: Detected PCMCIA, installing pcmciautils.
Jun 13 11:31:30 apt-install: Queueing package pcmciautils for later installation
Jun 13 11:31:30 apt-install: Queueing package udev for later installation
Jun 13 11:31:30 apt-install: Queueing package usbutils for later installation
Jun 13 11:31:30 apt-install: Queueing package acpi for later installation
Jun 13 11:31:30 apt-install: Queueing package acpid for later installation
Jun 13 11:31:30 apt-install: Queueing package acpi-support-base for later installation
Jun 13 11:31:33 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Jun 13 11:31:35 cdrom-detect: Searching for Debian installation media...
Jun 13 11:34:49 cdrom-detect: CDROM-detect failed; unmounting CD just to be sure
Jun 13 11:34:49 main-menu[899]: WARNING **: Configuring 'cdrom-detect' failed with error code 1 
Jun 13 11:34:49 main-menu[899]: WARNING **: Menu item 'cdrom-detect' failed. 
Jun 13 11:34:51 main-menu[899]: INFO: Modifying debconf priority limit from 'high' to 'medium' 
Jun 13 11:34:51 debconf: Setting debconf/priority to medium
Jun 13 11:34:51 main-menu[899]: DEBUG: resolver (libc6): package doesn't exist (ignored) 
Jun 13 11:35:05 main-menu[899]: INFO: Menu item 'cdrom-detect' selected 
Jun 13 11:35:06 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Jun 13 11:35:08 hw-detect: PCMCIA bridge driver already present in kernel
Jun 13 11:35:11 net/hw-detect.hotplug: Detected hotpluggable network interface lo
Jun 13 11:35:13 cdrom-detect: Searching for Debian installation media...
Jun 13 11:35:26 cdrom-detect: CDROM-detect failed; unmounting CD just to be sure
Jun 13 11:35:26 main-menu[899]: WARNING **: Configuring 'cdrom-detect' failed with error code 1 
Jun 13 11:35:26 main-menu[899]: WARNING **: Menu item 'cdrom-detect' failed. 
Jun 13 11:36:02 main-menu[899]: INFO: Modifying debconf priority limit from 'medium' to 'low' 
Jun 13 11:36:02 debconf: Setting debconf/priority to low
Jun 13 11:36:02 main-menu[899]: DEBUG: resolver (libc6): package doesn't exist (ignored) 
Jun 13 11:36:36 init: Starting pid 864, console /dev/tty2: '/bin/sh'
Jun 13 11:39:12 DEBUG: Before loading ide-generic
Jun 13 11:39:18 kernel: Probing IDE interface ide0...
Jun 13 11:39:18 kernel: hda: TOSHIBA MK4006MAV, ATA DISK drive
Jun 13 11:39:19 kernel: Probing IDE interface ide1...
Jun 13 11:39:19 kernel: hdc: CD-220EA, ATAPI CD/DVD-ROM drive
Jun 13 11:39:20 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jun 13 11:39:20 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jun 13 11:39:20 kernel: hda: max request size: 128KiB
Jun 13 11:39:20 kernel: hda: 8007552 sectors (4099 MB), CHS=7944/16/63
Jun 13 11:39:20 kernel: hda: cache flushes not supported
Jun 13 11:39:20 kernel:  hda6 >
Jun 13 11:39:20 kernel: hdc: ATAPI 20X CD-ROM drive, 128kB Cache
Jun 13 11:39:20 kernel: Uniform CD-ROM driver Revision: 3.20


Reply to: