Bug#415983: installation-report: No network detected, and some other comments
Package: installation-reports
Version: 2.29
Severity: normal
-- Package-specific info:
Boot method: CD
Image version: Etch Official Beta i386 CD Binary-1 20070317-21:45
Date: 2007-03-23 16:00 CET
Machine: HP nc6320
Partitions: <df -Tl will do; the raw partition table is preferred>
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda1 ext3 75459076 2040420 69585552 3% /
tmpfs tmpfs 254284 0 254284 0% /lib/init/rw
udev tmpfs 10240 52 10188 1% /dev
tmpfs tmpfs 254284 0 254284 0% /dev/shm
/dev/hda iso9660 658440 658440 0 100% /media/cdrom0
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [E]
Configure network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [O]
Clock/timezone setup: [ ]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [E]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
I have used the installgui boot method, GUI started up all right.
First thing: the navigation is not explained anywhere, and is not intuitive enough.
In the tree view for example when I have to choose my country I tried to press the right arrow to open a branch (the key I use in KDE
to do that). It didn't work. Then I have pressed space, another common key to open/collapse lists. It did not work (I think it has
closed everything, or something). Then I tried to figure it out, and after some time I remembered that some people in windows use +
and - to open and collapse. And it worked here too.
I would prefer if d-i handled all the possible keys that users could use, right-left arrow, space, +-, whatever.
But more important is that there should be either an explanation somewhere on the screen (bottom statusline for example), or at least
something like press ? for help (or F1, whatever). And open a vindow to explain how d-i graphical interface navigates.
Then, configuring the network, d-i have recognized my eth0, my firewire as eth1, and hasn't found my wifi. Alas I only have wifi
network here, so network could not be configured for the install.
Another usability problem: I was asked for my password twice. When the focus was on the first field, pressing return after the
password, d-i has submitted the page, then complained that the two do not match, and then cleaned both textboxes.
The problems: when the focus is on a text entry box, most probably I do not want the continue button to be activated when I press
return. d-i should just move the focus on the other box. Especially in the case of a password, where you are required to type the
same thing twice.
And it shouldn't erase the first textbox when the second one is empty, just position the focus there so that I can enter the password
the second time.
Choosing tasks: When I press return (I have learnt now that return means continue for d-i), it does not submit the page, all it does
it changes the tick in the list.
You should be more consistent in handling return. And anyway, return for tickink? Why not space, and return for submitting?
Tasks: "Desktop environment". No explanation. There should be a big fat warning that this is gnome, and not anything else one might
expect.
I have realized that there was no other desktop environment on the CD, and my network did not work, but a couple of weeks ago I have
installed from an Etch official beta DVD, and there was only one desktop environment. Only after installing everything was I shocked
to see gnome :-)
So 1, I think you should write "Gnome desktop environment",
2, and if there are others (because you have a DVD, or network connection), there should be other options, like "KDE desktop
environment", "XFCE desktop environment"
During the installation I was not asked any debconf questions. And I am a bit afraid what the defaults might be.
For example the default exim4 configuration wouldn't let me send this installation report, as it is good for local delivery only.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070308)"
X_INSTALLATION_MEDIUM=cdrom
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux nb106 2.6.18-4-486 #1 Wed Feb 21 15:25:16 UTC 2007 i686 unknown
lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
lspci -nn: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
lspci -nn: 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
lspci -nn: 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
lspci -nn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
lspci -nn: 00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 01)
lspci -nn: 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 01)
lspci -nn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 01)
lspci -nn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 01)
lspci -nn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 01)
lspci -nn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 01)
lspci -nn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01)
lspci -nn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1)
lspci -nn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01)
lspci -nn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
lspci -nn: 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI [8086:27c5] (rev 01)
lspci -nn: 02:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
lspci -nn: 02:06.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a]
lspci -nn: 02:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
lspci -nn: 02:06.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c]
lspci -nn: 02:06.4 Communication controller [0780]: Texas Instruments PCIxx12 GemCore based SmartCard controller [104c:803d]
lspci -nn: 02:0e.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet [14e4:169c] (rev 03)
lspci -nn: 08:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02)
lspci -vnn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Capabilities: [e0] Vendor Specific Information
lspci -vnn:
lspci -vnn: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: fast devsel, IRQ 10
lspci -vnn: Memory at e8400000 (32-bit, non-prefetchable) [size=512K]
lspci -vnn: I/O ports at 6000 [size=8]
lspci -vnn: Memory at d0000000 (32-bit, prefetchable) [size=256M]
lspci -vnn: Memory at e8480000 (32-bit, non-prefetchable) [size=256K]
lspci -vnn: Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
lspci -vnn: Capabilities: [d0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Memory at e8500000 (32-bit, non-prefetchable) [size=512K]
lspci -vnn: Capabilities: [d0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 10
lspci -vnn: Memory at e8580000 (64-bit, non-prefetchable) [size=16K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
lspci -vnn: Capabilities: [70] Express Unknown type IRQ 0
lspci -vnn:
lspci -vnn: 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
lspci -vnn: Memory behind bridge: e8000000-e80fffff
lspci -vnn: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn: Capabilities: [a0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=18, subordinate=18, sec-latency=0
lspci -vnn: I/O behind bridge: 00004000-00005fff
lspci -vnn: Memory behind bridge: e4000000-e7ffffff
lspci -vnn: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn: Capabilities: [a0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
lspci -vnn: I/O behind bridge: 00002000-00003fff
lspci -vnn: Memory behind bridge: e0000000-e3ffffff
lspci -vnn: Capabilities: [40] Express Root Port (Slot+) IRQ 0
lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: Capabilities: [90] Subsystem: Gammagraphx, Inc. Unknown device [0000:0000]
lspci -vnn: Capabilities: [a0] Power Management version 2
lspci -vnn:
lspci -vnn: 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 [8086:27c8] (rev 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 225
lspci -vnn: I/O ports at 6020 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 [8086:27c9] (rev 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 233
lspci -vnn: I/O ports at 6040 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 [8086:27ca] (rev 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 177
lspci -vnn: I/O ports at 6060 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 [8086:27cb] (rev 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 185
lspci -vnn: I/O ports at 6080 [size=32]
lspci -vnn:
lspci -vnn: 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 225
lspci -vnn: Memory at e8584000 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: Capabilities: [50] Power Management version 2
lspci -vnn: Capabilities: [58] Debug port
lspci -vnn:
lspci -vnn: 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) (prog-if 01)
lspci -vnn: Flags: bus master, fast devsel, latency 0
lspci -vnn: Bus: primary=00, secondary=02, subordinate=06, sec-latency=32
lspci -vnn: I/O behind bridge: 00007000-00007fff
lspci -vnn: Memory behind bridge: e8100000-e83fffff
lspci -vnn: Prefetchable memory behind bridge: 0000000020000000-0000000021ffffff
lspci -vnn: Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn:
lspci -vnn: 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: bus master, medium devsel, latency 0
lspci -vnn: Capabilities: [e0] Vendor Specific Information
lspci -vnn:
lspci -vnn: 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: bus master, medium devsel, latency 0, IRQ 169
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at <unassigned>
lspci -vnn: I/O ports at 60a0 [size=16]
lspci -vnn:
lspci -vnn: 00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller AHCI [8086:27c5] (rev 01) (prog-if 01)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 58
lspci -vnn: I/O ports at 13f0 [size=8]
lspci -vnn: I/O ports at 15f4 [size=4]
lspci -vnn: I/O ports at 1370 [size=8]
lspci -vnn: I/O ports at 1574 [size=4]
lspci -vnn: I/O ports at 60d0 [size=16]
lspci -vnn: Memory at e8585000 (32-bit, non-prefetchable) [size=1K]
lspci -vnn: Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
lspci -vnn: Capabilities: [70] Power Management version 2
lspci -vnn:
lspci -vnn: 02:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: bus master, medium devsel, latency 168, IRQ 177
lspci -vnn: Memory at e8100000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
lspci -vnn: Memory window 0: 20000000-21fff000 (prefetchable)
lspci -vnn: Memory window 1: 22000000-23fff000
lspci -vnn: I/O window 0: 00007000-000070ff
lspci -vnn: I/O window 1: 00007400-000074ff
lspci -vnn: 16-bit legacy interface ports at 0001
lspci -vnn:
lspci -vnn: 02:06.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a] (prog-if 10)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 185
lspci -vnn: Memory at e8101000 (32-bit, non-prefetchable) [size=2K]
lspci -vnn: Memory at e8104000 (32-bit, non-prefetchable) [size=16K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn:
lspci -vnn: 02:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 10
lspci -vnn: Memory at e8108000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn:
lspci -vnn: 02:06.3 Generic system peripheral [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c]
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: bus master, medium devsel, latency 64, IRQ 10
lspci -vnn: Memory at e8109000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Capabilities: [80] Power Management version 2
lspci -vnn:
lspci -vnn: 02:06.4 Communication controller [0780]: Texas Instruments PCIxx12 GemCore based SmartCard controller [104c:803d]
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: medium devsel, IRQ 10
lspci -vnn: Memory at e810a000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Memory at e810b000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [44] Power Management version 2
lspci -vnn:
lspci -vnn: 02:0e.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet [14e4:169c] (rev 03)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:30aa]
lspci -vnn: Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 169
lspci -vnn: Memory at e8110000 (32-bit, non-prefetchable) [size=64K]
lspci -vnn: Capabilities: [48] Power Management version 2
lspci -vnn: Capabilities: [50] Vital Product Data
lspci -vnn: Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
lspci -vnn:
lspci -vnn: 08:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02)
lspci -vnn: Subsystem: Hewlett-Packard Company Unknown device [103c:135c]
lspci -vnn: Flags: bus master, fast devsel, latency 0, IRQ 11
lspci -vnn: Memory at e8000000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [c8] Power Management version 2
lspci -vnn: Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
lspci -vnn: Capabilities: [e0] Express Legacy Endpoint IRQ 0
lspci -vnn:
modulemap: 8086:27c8 uhci_hcd
modulemap: 8086:27c9 uhci_hcd
modulemap: 8086:27ca uhci_hcd
modulemap: 8086:27cb uhci_hcd
modulemap: 8086:27cc ehci_hcd
modulemap: 8086:27df piix
modulemap: 8086:27c5 ahci
modulemap: 104c:8039 yenta_socket
modulemap: 104c:803a ohci1394
modulemap: 14e4:169c tg3
lsmod: Module Size Used by
lsmod: qnx4 10612 0
lsmod: ntfs 184084 0
lsmod: xfs 464756 0
lsmod: reiserfs 210432 0
lsmod: jfs 156380 0
lsmod: ext3 116488 1
lsmod: jbd 47272 1 ext3
lsmod: vfat 11392 0
lsmod: fat 45596 1 vfat
lsmod: eth1394 17540 0
lsmod: tg3 93572 0
lsmod: nls_iso8859_1 4096 0
lsmod: sbp2 20232 0
lsmod: isofs 31544 0
lsmod: ide_disk 14720 0
lsmod: ide_generic 1280 0 [permanent]
lsmod: pdc202xx_new 7808 0 [permanent]
lsmod: aec62xx 6656 0 [permanent]
lsmod: alim15x3 11020 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: atiixp 5776 0 [permanent]
lsmod: cmd64x 9884 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7684 0 [permanent]
lsmod: jmicron 4096 0 [permanent]
lsmod: ns87415 4168 0 [permanent]
lsmod: opti621 3972 0 [permanent]
lsmod: pdc202xx_old 9344 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6528 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: siimage 10880 0 [permanent]
lsmod: sis5513 12296 0 [permanent]
lsmod: slc90e66 4992 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 3972 0 [permanent]
lsmod: via82cxxx 8324 0 [permanent]
lsmod: usb_storage 70848 0
lsmod: usbmouse 5376 0
lsmod: vga16fb 11148 0
lsmod: vgastate 7680 1 vga16fb
lsmod: usbserial 28136 0
lsmod: usbhid 35552 0
lsmod: usbkbd 6656 0
lsmod: thermal 13320 0
lsmod: processor 23212 1 thermal
lsmod: fan 4740 0
lsmod: sd_mod 18832 3
lsmod: ide_cd 35360 0
lsmod: cdrom 32160 1 ide_cd
lsmod: generic 5380 0 [permanent]
lsmod: pcmcia 33468 0
lsmod: firmware_class 9216 1 pcmcia
lsmod: parport_pc 31268 0
lsmod: parport 31816 1 parport_pc
lsmod: ahci 17540 2
lsmod: psmouse 34312 0
lsmod: libata 87316 1 ahci
lsmod: scsi_mod 121352 5 sbp2,usb_storage,sd_mod,ahci,libata
lsmod: ohci1394 29744 0
lsmod: ieee1394 84408 3 eth1394,sbp2,ohci1394
lsmod: yenta_socket 24332 1
lsmod: rsrc_nonstatic 11648 1 yenta_socket
lsmod: pcmcia_core 35856 3 pcmcia,yenta_socket,rsrc_nonstatic
lsmod: piix 9092 0 [permanent]
lsmod: ide_core 107248 31 ide_disk,ide_generic,pdc202xx_new,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,jmicron,ns87415,opti621,pdc202xx_old,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,ide_cd,generic,piix
lsmod: ehci_hcd 26888 0
lsmod: uhci_hcd 19980 0
lsmod: usbcore 108676 8 usb_storage,usbmouse,usbserial,usbhid,usbkbd,ehci_hcd,uhci_hcd
lsmod: evdev 8832 4
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 254360 416 253944 0% /dev
df: tmpfs 254360 416 253944 0% /dev
df: tmpfs 254360 416 253944 0% /.dev
df: /dev/scsi/host0/bus0/target0/lun0/part1 75459076 1379812 70246160 2% /target
free: total used free shared buffers
free: Mem: 508724 482652 26072 0 46536
free: Swap: 1485972 412 1485560
free: Total: 1994696 483064 1511632
cardctl status: Socket 0:
cardctl status: no card
cardctl ident: Socket 0:
cardctl ident: no product info available
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 15
/proc/cpuinfo: model name : Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz
/proc/cpuinfo: stepping : 6
/proc/cpuinfo: cpu MHz : 1662.551
/proc/cpuinfo: cache size : 2048 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 10
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl est tm2 cx16 xtpr lahf_lm
/proc/cpuinfo: bogomips : 3328.79
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 01f0-01f7 : ide0
/proc/ioports: 0378-037a : parport0
/proc/ioports: 03c0-03df : vesafb
/proc/ioports: 03f6-03f6 : ide0
/proc/ioports: 03f8-03ff : serial
/proc/ioports: 04d0-04d1 : pnp 00:0c
/proc/ioports: 0778-077a : parport0
/proc/ioports: 0cf8-0cff : PCI conf1
/proc/ioports: 1000-107f : motherboard
/proc/ioports: 1000-1003 : ACPI PM1a_EVT_BLK
/proc/ioports: 1004-1005 : ACPI PM1a_CNT_BLK
/proc/ioports: 1008-100b : ACPI PM_TMR
/proc/ioports: 1010-1015 : ACPI CPU throttle
/proc/ioports: 1020-1020 : ACPI PM2_CNT_BLK
/proc/ioports: 1028-102f : ACPI GPE0_BLK
/proc/ioports: 1100-113f : motherboard
/proc/ioports: 1100-113f : pnp 00:0c
/proc/ioports: 1200-121f : motherboard
/proc/ioports: 1200-121f : pnp 00:0c
/proc/ioports: 1370-1377 : 0000:00:1f.2
/proc/ioports: 1370-1377 : ahci
/proc/ioports: 13f0-13f7 : 0000:00:1f.2
/proc/ioports: 13f0-13f7 : ahci
/proc/ioports: 1574-1577 : 0000:00:1f.2
/proc/ioports: 1574-1577 : ahci
/proc/ioports: 15f4-15f7 : 0000:00:1f.2
/proc/ioports: 15f4-15f7 : ahci
/proc/ioports: 2000-3fff : PCI Bus #20
/proc/ioports: 4000-5fff : PCI Bus #18
/proc/ioports: 6000-6007 : 0000:00:02.0
/proc/ioports: 6020-603f : 0000:00:1d.0
/proc/ioports: 6020-603f : uhci_hcd
/proc/ioports: 6040-605f : 0000:00:1d.1
/proc/ioports: 6040-605f : uhci_hcd
/proc/ioports: 6060-607f : 0000:00:1d.2
/proc/ioports: 6060-607f : uhci_hcd
/proc/ioports: 6080-609f : 0000:00:1d.3
/proc/ioports: 6080-609f : uhci_hcd
/proc/ioports: 60a0-60af : 0000:00:1f.1
/proc/ioports: 60a0-60a7 : ide0
/proc/ioports: 60d0-60df : 0000:00:1f.2
/proc/ioports: 60d0-60df : ahci
/proc/ioports: 7000-7fff : PCI Bus #02
/proc/ioports: 7000-70ff : PCI CardBus #03
/proc/ioports: 7400-74ff : PCI CardBus #03
/proc/iomem: 00000000-0009fbff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009fc00-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-1f7cffff : System RAM
/proc/iomem: 00100000-00277829 : Kernel code
/proc/iomem: 0027782a-0030dc73 : Kernel data
/proc/iomem: 1f7d0000-1f7e55ff : reserved
/proc/iomem: 1f7e5600-1f7f7fff : ACPI Non-volatile Storage
/proc/iomem: 1f7f8000-1f7fffff : reserved
/proc/iomem: 20000000-21ffffff : PCI Bus #02
/proc/iomem: 20000000-21ffffff : PCI CardBus #03
/proc/iomem: 22000000-23ffffff : PCI CardBus #03
/proc/iomem: d0000000-dfffffff : 0000:00:02.0
/proc/iomem: d0000000-d07affff : vesafb
/proc/iomem: e0000000-e3ffffff : PCI Bus #20
/proc/iomem: e4000000-e7ffffff : PCI Bus #18
/proc/iomem: e8000000-e80fffff : PCI Bus #08
/proc/iomem: e8000000-e8000fff : 0000:08:00.0
/proc/iomem: e8100000-e83fffff : PCI Bus #02
/proc/iomem: e8100000-e8100fff : 0000:02:06.0
/proc/iomem: e8100000-e8100fff : yenta_socket
/proc/iomem: e8101000-e81017ff : 0000:02:06.1
/proc/iomem: e8101000-e81017ff : ohci1394
/proc/iomem: e8104000-e8107fff : 0000:02:06.1
/proc/iomem: e8108000-e8108fff : 0000:02:06.2
/proc/iomem: e8109000-e81090ff : 0000:02:06.3
/proc/iomem: e810a000-e810afff : 0000:02:06.4
/proc/iomem: e810b000-e810bfff : 0000:02:06.4
/proc/iomem: e8110000-e811ffff : 0000:02:0e.0
/proc/iomem: e8110000-e811ffff : tg3
/proc/iomem: e8400000-e847ffff : 0000:00:02.0
/proc/iomem: e8480000-e84bffff : 0000:00:02.0
/proc/iomem: e8500000-e857ffff : 0000:00:02.1
/proc/iomem: e8580000-e8583fff : 0000:00:1b.0
/proc/iomem: e8584000-e85843ff : 0000:00:1d.7
/proc/iomem: e8584000-e85843ff : ehci_hcd
/proc/iomem: e8585000-e85853ff : 0000:00:1f.2
/proc/iomem: e8585000-e85853ff : ahci
/proc/iomem: fec00000-fec00fff : reserved
/proc/iomem: fed20000-fed9afff : reserved
/proc/iomem: feda0000-fedbffff : reserved
/proc/iomem: fee00000-fee00fff : reserved
/proc/iomem: ffb00000-ffbfffff : reserved
/proc/iomem: fff00000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 1216648 IO-APIC-edge timer
/proc/interrupts: 1: 344 IO-APIC-edge i8042
/proc/interrupts: 7: 0 IO-APIC-edge parport0
/proc/interrupts: 9: 1142 IO-APIC-level acpi
/proc/interrupts: 12: 10130 IO-APIC-edge i8042
/proc/interrupts: 14: 11002 IO-APIC-edge ide0
/proc/interrupts: 58: 89524 PCI-MSI libata
/proc/interrupts: 169: 44741 IO-APIC-level eth0
/proc/interrupts: 177: 1 IO-APIC-level uhci_hcd:usb3, yenta
/proc/interrupts: 185: 1 IO-APIC-level uhci_hcd:usb4, ohci1394
/proc/interrupts: 225: 121 IO-APIC-level uhci_hcd:usb1, ehci_hcd:usb5
/proc/interrupts: 233: 0 IO-APIC-level uhci_hcd:usb2
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 1216555
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 508724 kB
/proc/meminfo: MemFree: 25880 kB
/proc/meminfo: Buffers: 46536 kB
/proc/meminfo: Cached: 374076 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 182268 kB
/proc/meminfo: Inactive: 263680 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 508724 kB
/proc/meminfo: LowFree: 25880 kB
/proc/meminfo: SwapTotal: 1485972 kB
/proc/meminfo: SwapFree: 1485560 kB
/proc/meminfo: Dirty: 948 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 25376 kB
/proc/meminfo: Mapped: 6936 kB
/proc/meminfo: Slab: 28976 kB
/proc/meminfo: PageTables: 252 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 1740332 kB
/proc/meminfo: Committed_AS: 66684 kB
/proc/meminfo: VmallocTotal: 523984 kB
/proc/meminfo: VmallocUsed: 8612 kB
/proc/meminfo: VmallocChunk: 514432 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd event0
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 feffffdf ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0011 Vendor=0002 Product=0007 Version=0000
/proc/bus/input/devices: N: Name="SynPS/2 Synaptics TouchPad"
/proc/bus/input/devices: P: Phys=isa0060/serio4/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=mouse0 event1
/proc/bus/input/devices: B: EV=b
/proc/bus/input/devices: B: KEY=6420 0 70000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: ABS=11000003
/proc/bus/input/devices:
dmidecode: # dmidecode 2.8
dmidecode: SMBIOS 2.4 present.
dmidecode: 23 structures occupying 1029 bytes.
dmidecode: Table at 0x000F3CB3.
dmidecode:
dmidecode: Handle 0x0000, DMI type 0, 24 bytes
dmidecode: BIOS Information
dmidecode: Vendor: Hewlett-Packard
dmidecode: Version: 68YDU Ver. F.09
dmidecode: Release Date: 09/15/2006
dmidecode: Address: 0xE0000
dmidecode: Runtime Size: 128 kB
dmidecode: ROM Size: 1024 kB
dmidecode: Characteristics:
dmidecode: PCI is supported
dmidecode: PC Card (PCMCIA) is supported
dmidecode: PNP is supported
dmidecode: BIOS is upgradeable
dmidecode: BIOS shadowing is allowed
dmidecode: Boot from CD is supported
dmidecode: Selectable boot is supported
dmidecode: EDD is supported
dmidecode: 3.5"/720 KB floppy services are supported (int 13h)
dmidecode: Print screen service is supported (int 5h)
dmidecode: 8042 keyboard services are supported (int 9h)
dmidecode: Serial services are supported (int 14h)
dmidecode: Printer services are supported (int 17h)
dmidecode: ACPI is supported
dmidecode: USB legacy is supported
dmidecode: LS-120 boot is supported
dmidecode: Smart battery is supported
dmidecode: BIOS boot specification is supported
dmidecode: Function key-initiated network boot is supported
dmidecode: Targeted content distribution is supported
dmidecode: BIOS Revision: 15.9
dmidecode: Firmware Revision: 0.0
dmidecode:
dmidecode: Handle 0x0001, DMI type 1, 27 bytes
dmidecode: System Information
dmidecode: Manufacturer: Hewlett-Packard
dmidecode: Product Name: HP Compaq nc6320 (RH368EA#AKC)
dmidecode: Version: F.09
dmidecode: Serial Number: CNU65011HX
dmidecode: UUID: AC61953E-9881-DB11-2180-6D990C58F529
dmidecode: Wake-up Type: Power Switch
dmidecode: SKU Number: RH368EA#AKC
dmidecode: Family: 103C_5336AN
dmidecode:
dmidecode: Handle 0x0040, DMI type 126, 33 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0002, DMI type 2, 8 bytes
dmidecode: Base Board Information
dmidecode: Manufacturer: Hewlett-Packard
dmidecode: Product Name: 30AA
dmidecode: Version: KBC Version xx.xx
dmidecode: Serial Number: Not Specified
dmidecode:
dmidecode: Handle 0x0003, DMI type 3, 13 bytes
dmidecode: Chassis Information
dmidecode: Manufacturer: Hewlett-Packard
dmidecode: Type: Notebook
dmidecode: Lock: Not Present
dmidecode: Version: Not Specified
dmidecode: Serial Number: CNU65011HX
dmidecode: Asset Tag: CNU65011HX
dmidecode: Boot-up State: Safe
dmidecode: Power Supply State: Safe
dmidecode: Thermal State: Safe
dmidecode: Security Status: External Interface Enabled
dmidecode:
dmidecode: Handle 0x0041, DMI type 126, 32 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0004, DMI type 4, 35 bytes
dmidecode: Processor Information
dmidecode: Socket Designation: U10
dmidecode: Type: Central Processor
dmidecode: Family: Pentium M
dmidecode: Manufacturer: Intel(R)
dmidecode: ID: F6 06 00 00 FF FB EB BF
dmidecode: Signature: Type 0, Family 6, Model 15, Stepping 6
dmidecode: Flags:
dmidecode: FPU (Floating-point unit on-chip)
dmidecode: VME (Virtual mode extension)
dmidecode: DE (Debugging extension)
dmidecode: PSE (Page size extension)
dmidecode: TSC (Time stamp counter)
dmidecode: MSR (Model specific registers)
dmidecode: PAE (Physical address extension)
dmidecode: MCE (Machine check exception)
dmidecode: CX8 (CMPXCHG8 instruction supported)
dmidecode: APIC (On-chip APIC hardware supported)
dmidecode: SEP (Fast system call)
dmidecode: MTRR (Memory type range registers)
dmidecode: PGE (Page global enable)
dmidecode: MCA (Machine check architecture)
dmidecode: CMOV (Conditional move instruction supported)
dmidecode: PAT (Page attribute table)
dmidecode: PSE-36 (36-bit page size extension)
dmidecode: CLFSH (CLFLUSH instruction supported)
dmidecode: DS (Debug store)
dmidecode: ACPI (ACPI supported)
dmidecode: MMX (MMX technology supported)
dmidecode: FXSR (Fast floating-point save and restore)
dmidecode: SSE (Streaming SIMD extensions)
dmidecode: SSE2 (Streaming SIMD extensions 2)
dmidecode: SS (Self-snoop)
dmidecode: HTT (Hyper-threading technology)
dmidecode: TM (Thermal monitor supported)
dmidecode: PBE (Pending break enabled)
dmidecode: Version: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz
dmidecode: Voltage: 1.1 V
dmidecode: External Clock: 166 MHz
dmidecode: Max Speed: 1667 MHz
dmidecode: Current Speed: 1667 MHz
dmidecode: Status: Populated, Enabled
dmidecode: Upgrade: None
dmidecode: L1 Cache Handle: 0x0005
dmidecode: L2 Cache Handle: 0x0006
dmidecode: L3 Cache Handle: Not Provided
dmidecode: Serial Number: Not Specified
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: Not Specified
dmidecode:
dmidecode: Handle 0x0005, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Internal L1 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 1
dmidecode: Operational Mode: Write Back
dmidecode: Location: Internal
dmidecode: Installed Size: 64 KB
dmidecode: Maximum Size: 64 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: Unknown
dmidecode: System Type: Unified
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0006, DMI type 7, 19 bytes
dmidecode: Cache Information
dmidecode: Socket Designation: Internal L2 Cache
dmidecode: Configuration: Enabled, Not Socketed, Level 2
dmidecode: Operational Mode: Write Back
dmidecode: Location: External
dmidecode: Installed Size: 2048 KB
dmidecode: Maximum Size: 2048 KB
dmidecode: Supported SRAM Types:
dmidecode: Burst
dmidecode: Installed SRAM Type: Burst
dmidecode: Speed: Unknown
dmidecode: Error Correction Type: None
dmidecode: System Type: Unified
dmidecode: Associativity: 4-way Set-associative
dmidecode:
dmidecode: Handle 0x0007, DMI type 9, 13 bytes
dmidecode: System Slot Information
dmidecode: Designation: PC CARD-Slot 0
dmidecode: Type: 32-bit PC Card (PCMCIA)
dmidecode: Current Usage: Available
dmidecode: Length: Short
dmidecode: ID: Adapter 0, Socket 0
dmidecode: Characteristics:
dmidecode: 5.0 V is provided
dmidecode: 3.3 V is provided
dmidecode: PC Card-16 is supported
dmidecode: Cardbus is supported
dmidecode: PME signal is supported
dmidecode:
dmidecode: Handle 0x0008, DMI type 10, 6 bytes
dmidecode: On Board Device Information
dmidecode: Type: Video
dmidecode: Status: Enabled
dmidecode: Description: 8
dmidecode:
dmidecode: Handle 0x0009, DMI type 11, 5 bytes
dmidecode: OEM Strings
dmidecode: String 1: www.hp.com
dmidecode: String 2: ABS 70/71 79 7A 7B 7C
dmidecode:
dmidecode: Handle 0x000A, DMI type 16, 15 bytes
dmidecode: Physical Memory Array
dmidecode: Location: System Board Or Motherboard
dmidecode: Use: System Memory
dmidecode: Error Correction Type: None
dmidecode: Maximum Capacity: 4 GB
dmidecode: Error Information Handle: No Error
dmidecode: Number Of Devices: 2
dmidecode:
dmidecode: Handle 0x000B, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x000A
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: 64 bits
dmidecode: Data Width: 64 bits
dmidecode: Size: 512 MB
dmidecode: Form Factor: SODIMM
dmidecode: Set: None
dmidecode: Locator: DIMM #1
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR2
dmidecode: Type Detail: Synchronous
dmidecode: Speed: 667 MHz (1.5 ns)
dmidecode: Manufacturer: CE00000000000000
dmidecode: Serial Number: F73D8714
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number: M4 70T6554CZ3-CE6
dmidecode:
dmidecode: Handle 0x000C, DMI type 17, 27 bytes
dmidecode: Memory Device
dmidecode: Array Handle: 0x000A
dmidecode: Error Information Handle: No Error
dmidecode: Total Width: Unknown
dmidecode: Data Width: Unknown
dmidecode: Size: No Module Installed
dmidecode: Form Factor: SODIMM
dmidecode: Set: None
dmidecode: Locator: DIMM #2
dmidecode: Bank Locator: Not Specified
dmidecode: Type: DDR2
dmidecode: Type Detail: Synchronous
dmidecode: Speed: Unknown
dmidecode: Manufacturer:
dmidecode: Serial Number:
dmidecode: Asset Tag: Not Specified
dmidecode: Part Number:
dmidecode:
dmidecode: Handle 0x000D, DMI type 19, 15 bytes
dmidecode: Memory Array Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Array Handle: 0x000A
dmidecode: Partition Width: 0
dmidecode:
dmidecode: Handle 0x000E, DMI type 20, 19 bytes
dmidecode: Memory Device Mapped Address
dmidecode: Starting Address: 0x00000000000
dmidecode: Ending Address: 0x0001FFFFFFF
dmidecode: Range Size: 512 MB
dmidecode: Physical Device Handle: 0x000B
dmidecode: Memory Array Mapped Address Handle: 0x000D
dmidecode: Partition Row Position: 1
dmidecode:
dmidecode: Handle 0x000F, DMI type 126, 19 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0010, DMI type 32, 11 bytes
dmidecode: System Boot Information
dmidecode: Status: No errors detected
dmidecode:
dmidecode: Handle 0x0085, DMI type 133, 34 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 85 22 85 00 01 C0 12 78 12 AD 0D 02 00 06 00 1D
dmidecode: 00 95 2C 64 F8 5C 2B 02 C0 00 00 00 C9 0E E8 0E
dmidecode: E8 0E
dmidecode: Strings:
dmidecode: 04015 11/07/2006
dmidecode: HP
dmidecode:
dmidecode: Handle 0x0086, DMI type 126, 34 bytes
dmidecode: Inactive
dmidecode:
dmidecode: Handle 0x0011, DMI type 144, 26 bytes
dmidecode: OEM-specific Type
dmidecode: Header and Data:
dmidecode: 90 1A 11 00 FF FF FF FF FF FF FF FF FF FF FF FF
dmidecode: FF FF FF FF FF FF FF FF 00 00
dmidecode:
dmidecode: Handle 0x0012, DMI type 127, 4 bytes
dmidecode: End Of Table
dmidecode:
/proc/fb: 0 VESA VGA
/proc/fb: 1 VGA16 VGA
/etc/directfbrc: no-hardware
/etc/directfbrc: bg-color=ffdcdad5
/etc/directfbrc: screenshot-dir=/var/log
/etc/directfbrc: disable-module=keyboard
/etc/directfbrc: disable-module=ps2mouse
/etc/directfbrc: #disable-module=linux_input
dfbinfo: (*) DirectFB/Config: Parsing config file '/etc/directfbrc'.
dfbinfo:
dfbinfo: ---------------------- DirectFB v0.9.25 ---------------------
dfbinfo: (c) 2000-2002 convergence integrated media GmbH
dfbinfo: (c) 2002-2004 convergence GmbH
dfbinfo: -----------------------------------------------------------
dfbinfo:
dfbinfo: (*) DirectFB/Core: Single Application Core. (2006-12-04 07:06)
dfbinfo: (*) Direct/Memcpy: Using linux kernel memcpy()
dfbinfo: (*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 10085)...
dfbinfo: (*) Direct/Modules: suppress module 'keyboard'
dfbinfo: (*) Direct/Modules: suppress module 'ps2mouse'
dfbinfo: (*) Direct/Thread: Running 'Linux Input' (INPUT, 10086)...
dfbinfo: (!!!) *** UNIMPLEMENTED [fusion_reactor_set_lock] *** [../../../lib/fusion/reactor.c:853]
dfbinfo: (*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1 (convergence integrated media GmbH)
dfbinfo: (*) Direct/Thread: Running 'Linux Input' (INPUT, 10087)...
dfbinfo: (*) DirectFB/Input: SynPS/2 Synaptics TouchPad (2) 0.1 (convergence integrated media GmbH)
dfbinfo: (*) DirectFB/Graphics: Generic Software Rasterizer 0.6 (convergence integrated media GmbH)
dfbinfo: (*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
dfbinfo:
dfbinfo:
dfbinfo: Screen (00) FBDev Primary Screen (primary screen)
dfbinfo: Caps: VSYNC POWER_MANAGEMENT
dfbinfo:
dfbinfo: Layer (00) FBDev Primary Layer (primary layer)
dfbinfo: Type: GRAPHICS
dfbinfo: Caps: SURFACE BRIGHTNESS CONTRAST SATURATION
dfbinfo:
dfbinfo:
dfbinfo: Input (00) AT Translated Set 2 keyboard (primary keyboard)
dfbinfo: Type: KEYBOARD
dfbinfo: Caps: KEYS
dfbinfo:
dfbinfo: Input (01) SynPS/2 Synaptics TouchPad (primary mouse)
dfbinfo: Type: MOUSE
dfbinfo: Caps: AXES BUTTONS
dfbinfo: Max. Axis: 1
dfbinfo: Max. Button: 2
dfbinfo:
==============================================
Installer status:
==============================================
Package: ttf-thai-tlwg-udeb
Status: install ok unpacked
Version: 1:0.4.5-2
Description: Thai fonts in TrueType format for D-I use
Package: usb-storage-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-storage-modules
Depends: ide-core-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB storage support
Package: serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: serial-modules
Depends: kernel-image-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: Serial drivers
Package: preseed-common
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: cdrom-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: cdrom-core-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, ide-modules-2.6.18-4-486-di
Description: CDROM support
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.37
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for DNS - udeb
Package: cdrom-checker
Status: install ok unpacked
Version: 1.11
Depends: cdrom-detect, cdebconf-udeb (>= 0.31)
Description: Verify the cd contents
Installer-Menu-Item: 940
Package: lowmemcheck
Status: install ok unpacked
Version: 1.25
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: cdrom-retriever
Status: install ok installed
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, cdrom-detect
Description: Fetch modules from a CDROM
Package: main-menu
Status: install ok unpacked
Version: 1.18
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Debian installer main menu
Package: ttf-khmeros-udeb
Status: install ok unpacked
Version: 3.10-4
Provides: ttf-installer
Description: Debian-Installer font for the Khmer language of Cambodia
Package: di-utils-shell
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: ttf-dejavu-udeb
Status: install ok unpacked
Version: 2.15-1
Description: Vera font family derivate with additional characters
Package: di-utils
Status: install ok installed
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: fb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Frame buffer support
Package: ttf-cjk-compact-udeb
Status: install ok unpacked
Version: 1.8
Description: Shrinked CJK TrueType fonts for GUI d-i.
Package: scsi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, parport-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: SCSI drivers
Package: pcmcia-storage-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-storage-modules
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Description: PCMCIA storage drivers
Package: kernel-image-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: ttf-freefont-udeb
Status: install ok unpacked
Version: 20060501cvs-10
Provides: ttf-installer
Description: Freefont Sans fonts for the graphical installer
Package: usb-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-modules
Depends: kernel-image-2.6.18-4-486-di
Description: USB support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.6-6)
Description: tools for managing Linux kernel modules
Package: parport-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: parport-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Parallel port support
Package: rootskel
Status: install ok installed
Version: 1.50
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: ide-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: ide-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: IDE support
Package: cdrom-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: cdrom-modules
Depends: ide-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Esoteric CDROM drivers
Package: libgtk-directfb-2.0-0-udeb
Status: install ok unpacked
Version: 2.8.20-7
Depends: libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb, libglib2.0-udeb (>= 2.12.0), libpango1.0-udeb (>= 1.14.8), libpng12-0-udeb (>= 1.2.13-4)
Description: The GTK+ graphical user interface library - minimal runtime
Package: udev-udeb
Status: install ok unpacked
Version: 0.105-3
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: ide-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: ide-modules
Depends: kernel-image-2.6.18-4-486-di, ide-core-modules-2.6.18-4-486-di
Description: IDE drivers
Package: libpng12-0-udeb
Status: install ok unpacked
Version: 1.2.15~beta5-1
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: PNG library - minimal runtime library
Package: libnss-files-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for files - udeb
Package: mouse-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: mouse-modules
Depends: kernel-image-2.6.18-4-486-di, input-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: Mouse support
Package: brltty-udeb
Status: install ok unpacked
Version: 3.7.2-7
Depends: libc6 (>= 2.3.6-6)
Description: Access software for a blind person using a soft braille terminal
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.6-6)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libcairo-directfb2-udeb
Status: install ok unpacked
Version: 1.2.4-4
Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6), libdirectfb-0.9-25-udeb, libfreetype6-udeb (>= 2.2), libpng12-0-udeb (>= 1.2.8rel), zlib1g-udeb (>= 1:1.2.1)
Description: The Cairo 2D vector graphics library DirectFB build
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.6-6)
Description: text-wrapping library with i18n - runtime udeb
Package: gtk2-engines-udeb
Status: install ok unpacked
Version: 1:2.8.2-1
Depends: libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb, libglib2.0-udeb (>= 2.12.0), libgtk-directfb-2.0-0-udeb (>= 2.8.0), libpango1.0-udeb (>= 1.14.7)
Description: theme engines for GTK+ 2.x in the Debian installer
Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.9
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1
Provides: editor
Depends: libc6 (>= 2.3.6-6), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: rootskel-gtk
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb, rootskel, mouse-modules, gtk2-engines-udeb
Description: Additions for graphical installs to skeleton root filesystem (debian-installer)
Package: cdebconf-udeb
Status: install ok installed
Version: 0.114
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: libpango1.0-udeb
Status: install ok unpacked
Version: 1.14.8-5
Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libfreetype6-udeb (>= 2.2), libglib2.0-udeb (>= 2.12.0), zlib1g-udeb (>= 1:1.2.1)
Description: Layout and rendering of internationalized text
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: pcmcia-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: pcmcia-modules
Depends: kernel-image-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Description: Common PCMCIA drivers
Package: load-cdrom
Status: install ok installed
Version: 1.14
Depends: cdebconf-udeb, cdrom-retriever, anna (>= 1.07)
Description: Load installer components from CD
Installer-Menu-Item: 16
Package: scsi-common-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-common-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di, cdrom-core-modules-2.6.18-4-486-di
Description: Very common SCSI drivers
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: acpi-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: acpi-modules
Depends: kernel-image-2.6.18-4-486-di
Description: ACPI support modules
Package: libfreetype6-udeb
Status: install ok unpacked
Version: 2.2.1-5
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: FreeType 2 font engine for the debian-installer
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file
Package: floppy-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: floppy-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Floppy driver
Package: ttf-malayalam-fonts-udeb
Status: install ok unpacked
Version: 1:0.4.7.4
Provides: ttf-installer
Description: Free TrueType fonts for the Malayalam language
Package: usb-serial-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: usb-serial-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: USB serial drivers
Package: ttf-farsiweb-udeb
Status: install ok unpacked
Version: 0.4.dfsg-6
Provides: ttf-installer
Description: Farsiweb TrueType fonts for the graphical installer
Package: floppy-retriever
Status: install ok unpacked
Version: 1.14
Provides: retriever
Depends: cdebconf-udeb, mountfloppy
Description: Fetches modules from a floppy
Package: ethdetect
Status: install ok installed
Version: 1.50
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17
Package: libexpat1-udeb
Status: install ok unpacked
Version: 1.95.8-3.4
Provides: libexpat1
Depends: libc6 (>= 2.3.6-6)
Description: XML parsing C library - runtime library
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.6-6)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.28
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: archdetect
Status: install ok installed
Version: 1.50
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50)
Description: Hardware architecture detector
Package: ttf-bpg-georgian-fonts-udeb
Status: install ok unpacked
Version: 0.3
Provides: ttf-installer
Description: BPG Georgian fonts for the graphical installer
Package: save-logs
Status: install ok unpacked
Version: 2.29
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.1.0-1
Provides: libsysfs2
Depends: libc6 (>= 2.3.6-6)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 014-3
Depends: udev-udeb, libc6 (>= 2.3.6-6), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.6-6)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-7
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: ttf-tamil-fonts-udeb
Status: install ok unpacked
Version: 1:0.4.7.4
Provides: ttf-installer
Description: Free TrueType fonts for the Tamil language
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.45
Description: Terminfo entries needed by newt/slang in debian installer
Package: fat-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: fat-modules
Depends: kernel-image-2.6.18-4-486-di
Description: FAT filesystem support
Package: libdirectfb-0.9-25-udeb
Status: install ok unpacked
Version: 0.9.25.1-5
Provides: libdirectfb-0.9-25
Depends: libc6 (>= 2.3.6-6), libfreetype6-udeb (>= 2.2), libpng12-0-udeb (>= 1.2.8rel), libsysfs2-udeb, zlib1g-udeb (>= 1:1.2.1)
Description: direct frame buffer graphics - shared libraries
Package: hw-detect
Status: install ok installed
Version: 1.50
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.34
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.50
Depends: libc6 (>= 2.3.6-6)
Description: Library of common debian-installer functions
Package: firewire-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.18-4-486-di, kernel-image-2.6.18-4-486-di
Description: Core FireWire drivers
Package: fontconfig-udeb
Status: install ok unpacked
Version: 2.4.2-1.2
Depends: fontconfig-udeb (>= 2.4.0), libc6 (>= 2.3.6-6), libexpat1-udeb (>= 1.95.8), libfreetype6-udeb (>= 2.2), zlib1g-udeb (>= 1:1.2.1)
Description: generic font configuration library - minimal runtime
Package: cdebconf-gtk-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, libatk1.0-udeb (>= 1.12.2), libc6 (>= 2.3.6-6), libcairo-directfb2-udeb (>= 1.2.4), libdirectfb-0.9-25-udeb, libglib2.0-udeb (>= 2.12.0), libgtk-directfb-2.0-0-udeb (>= 2.8.0), libpango1.0-udeb (>= 1.14.8), rootskel-gtk (>= 0.05)
Description: Gtk+ frontend for Debian Configuration Management System
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.28
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.11
Depends: cdebconf-udeb, di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.36
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: file-preseed
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils, preseed-common
Description: load debconf preseed file
Installer-Menu-Item: 14
Package: ttf-tmuni-udeb
Status: install ok unpacked
Version: 0.0.20040806-1.2
Provides: ttf-installer
Description: font for Tibetan, Dzongkha and Ladakhi (OpenType Unicode)
Package: zlib1g-udeb
Status: install ok unpacked
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
Package: libglib2.0-udeb
Status: install ok unpacked
Version: 2.12.4-2
Depends: libc6 (>= 2.3.6-6)
Description: The GLib library of C routines
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.114
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: firmware-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: firmware-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Firmware request modules
Package: input-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: input-modules
Depends: kernel-image-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di
Description: Input devices support
Package: scsi-core-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: scsi-core-modules
Depends: kernel-image-2.6.18-4-486-di
Description: Core SCSI subsystem
Package: libatk1.0-udeb
Status: install ok unpacked
Version: 1.12.4-2
Depends: libc6 (>= 2.3.6-6), libglib2.0-udeb (>= 2.12.0)
Description: The ATK accessibility toolkit
Package: cdrom-detect
Status: install ok installed
Version: 1.20
Depends: cdebconf-udeb, hw-detect, di-utils (>= 1.33)
Description: Detect CDROM devices and mount the CD
Installer-Menu-Item: 13
Package: sata-modules-2.6.18-4-486-di
Status: install ok unpacked
Version: 1.44
Provides: sata-modules
Depends: kernel-image-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Description: SATA drivers
Package: debian-installer
Status: install ok installed
Version: cdrom-gtk-20070308
Description: debian installation image
Package: apt-cdrom-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: cdrom-detect, cdebconf-udeb
Provides: apt-mirror-setup
Description: set up a CD in sources.list
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.76
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: choose-mirror-bin
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 336
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.13
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.50), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.14
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: crc-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: crc-modules
Description: CRC modules
This package contains CRC support modules.
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 196
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3.2
Depends: libc6 (>= 2.3.6-6), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: dhcp-client-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Eloy A. Paris <peloy@debian.org>
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.6-6)
Description: DHCP Client for debian-installer
dhcp-client-udeb is a minimal dhcp package used by the debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.45
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.49)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.50
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: dmidecode-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Petter Reinholdtsen <pere@debian.org>
Version: 2.8-4
Depends: libc6 (>= 2.3.6-6)
Description: Dump Desktop Management Interface data (udeb)
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 356
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.6-6)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: efi-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 44
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: efi-modules
Description: EFI modules
This package contains EFI modules.
Package: elilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: cdebconf-udeb, base-installer, partconf-find-partitions (>= 1.08), di-utils-mapdevfs, fat-modules, efi-modules, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install elilo on a hard disk
Installer-Menu-Item: 76
Package: ext3-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 136
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-19
Depends: libc6 (>= 2.3.6-6)
Description: Partition a hard drive (manual)
fdisk package
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.9
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab, bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: gpgv-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: James Troup <james@nocrew.org>
Version: 1.4.6-1
Depends: libc6 (>= 2.3.6-6), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
GnuPG is GNU's tool for secure communication and data storage.
It can be used to encrypt data and to create digital signatures.
It includes an advanced key management facility and is compliant
with the proposed OpenPGP Internet standard as described in RFC2440.
.
This is GnuPG's signature verification tool, gpgv, packaged in minimal
form for use in debian-installer.
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 376
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.22
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: jfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 984
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1584
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6.ds1-13
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 52
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.08-1
Depends: libc6 (>= 2.3.6-6)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.6-6)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.20
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-prober, dmidecode-udeb (>= 2.7)
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.06-4
Depends: libc6 (>= 2.3.6-6), libdevmapper1.02-udeb (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: md-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 436
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 176
Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>
Version: 2.5.6-9
Depends: libc6 (>= 2.3.6-6)
Description: tool to administer Linux MD arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
arrays (e.g. software RAID, multipath devices).
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 412
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: cdebconf-udeb, di-utils (>= 1.16), md-modules, mdadm-udeb (>= 2.5.2), partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-4
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: network-preseed
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.28
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: nic-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 2992
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, crc-modules-2.6.18-4-486-di
Provides: nic-extra-modules
Description: Rare NIC drivers
This package contains rare NIC drivers for the Linux kernel.
Package: nic-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 444
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di, firewire-core-modules-2.6.18-4-486-di
Provides: nic-modules
Description: Common NIC drivers
This package contains common NIC drivers for the Linux kernel.
Package: nic-pcmcia-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 572
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, nic-extra-modules-2.6.18-4-486-di, pcmcia-modules-2.6.18-4-486-di
Provides: nic-pcmcia-modules
Description: Common PCMCIA NIC drivers
This package contains common PCMCIA NIC drivers for the Linux kernel.
Package: nic-shared-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: nic-shared-modules
Description: Shared NIC drivers
This package contains NIC drivers needed by combinations of nic-modules,
nic-extra-modules, and nic-pcmcia-modules.
Package: nic-usb-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 208
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di, nic-shared-modules-2.6.18-4-486-di, usb-modules-2.6.18-4-486-di, firmware-modules-2.6.18-4-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 244
Maintainer: David Martínez Moreno <ender@debian.org>
Version: 1.13.1-6+b2
Depends: libc6 (>= 2.3.6-6)
Provides: ntfstools-udeb
Description: Tools for doing neat things in NTFS partitions from Linux - udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 128
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.50), libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 392
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 68
Depends: cdebconf-udeb, di-utils, partman-base (>= 99), partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-auto (>= 55), partman-auto-lvm (>= 14), partman-crypto (>= 13), partman-base (>= 87)
Description: Automatically partition storage devices using crypto and LVM
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 164
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 22
Depends: cdebconf-udeb, partman-base (>= 73), partman-auto (>= 59), partman-lvm (>= 36), di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-auto-raid
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 5
Depends: cdebconf-udeb, partman-base (>= 99), partman-basicfilesystems, partman-ext3, partman-auto (>= 58), partman-md
Description: Allow preseeded RAID installs
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 872
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 105
Depends: libc6 (>= 2.3.6-6), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 880
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 20
Depends: partman-base (>= 87), libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for block device encryption
Package: partman-efi
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 13
Depends: partman-base, efi-modules
Description: Add to partman support for EFI boot partitions
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 272
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 21
Depends: cdebconf-udeb, jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 732
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 53
Depends: cdebconf-udeb, partman-base (>= 87), di-utils (>= 1.14), md-modules, lvm2-udeb, parted-udeb
Description: Adds support for LVM to partman
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb, mdadm-udeb, mdcfg-utils, partman-base (>= 87)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: ntfsprogs-udeb, cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 35
Depends: cdebconf-udeb, mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 49
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 224
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 33
Depends: cdebconf-udeb, xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-cs-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 232
Maintainer: Per Olofsson <pelle@debian.org>
Version: 3.2.8-9
Description: PCMCIA Card Services for Linux (udeb)
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: reiserfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 268
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: scsi-extra-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1388
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: scsi-modules-2.6.18-4-486-di, scsi-core-modules-2.6.18-4-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: wireless-tools-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 28
Maintainer: Guus Sliepen <guus@debian.org>
Version: 28-1
Depends: libc6 (>= 2.3.5-1), libiw28-udeb (>= 28)
Description: Tools for manipulating Linux Wireless Extensions
This package contains the Wireless tools, used to manipulate the Linux
Wireless Extensions. The Wireless Extension is an interface allowing you to
set Wireless LAN specific parameters and get the specific stats.
.
This is a udeb of the wireless tools.
Package: xfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 552
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 232
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.8.11-1
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 248
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.18-4-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.44
Depends: kernel-image-2.6.18-4-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-686
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:2.2.4~pre4-1 Linux PCI Utilities
ii reportbug 3.31 reports bugs in the Debian distrib
-- no debconf information
Reply to: