Bug#382900: installation-report: d-i b3, Dell Latitude D810: CD detection
Package: installation-report
Severity: normal
Boot method: netinst CD
Image version: d-i b3 from link in d-i b3 availability announcement
Date: August 13, 8:00 a.m. EDT
Machine: Dell Latitude D810
Processor: P4 2 GHz
Memory: 1GB
Partitions: n/a
Output of lspci and lspci -n:
----- lspci
0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
0000:00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Radeon Mobility M300]
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
0000:03:01.0 CardBus bridge: Texas Instruments PCI6515 Cardbus Controller
0000:03:01.5 Communication controller: Texas Instruments PCI6515 SmartCard Controller
0000:03:03.0 Network controller: Intel Corporation PRO/Wireless 2915ABG MiniPCI Adapter (rev 05)
------ lspci -n
0000:00:00.0 0600: 8086:2590 (rev 03)
0000:00:01.0 0604: 8086:2591 (rev 03)
0000:00:1c.0 0604: 8086:2660 (rev 03)
0000:00:1d.0 0c03: 8086:2658 (rev 03)
0000:00:1d.1 0c03: 8086:2659 (rev 03)
0000:00:1d.2 0c03: 8086:265a (rev 03)
0000:00:1d.3 0c03: 8086:265b (rev 03)
0000:00:1d.7 0c03: 8086:265c (rev 03)
0000:00:1e.0 0604: 8086:2448 (rev d3)
0000:00:1e.2 0401: 8086:266e (rev 03)
0000:00:1e.3 0703: 8086:266d (rev 03)
0000:00:1f.0 0601: 8086:2641 (rev 03)
0000:00:1f.2 0101: 8086:2653 (rev 03)
0000:01:00.0 0300: 1002:5460
0000:02:00.0 0200: 14e4:1677 (rev 01)
0000:03:01.0 0607: 104c:8036
0000:03:01.5 0780: 104c:8038
0000:03:03.0 0280: 8086:4223 (rev 05)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [E]
Configure network HW: [ ]
Config network: [ ]
Detect CD: [E]
Load installer modules: [ ]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
When booting from the CD, after loading the kernel and initial
ramdisk, d-i failed to detect the CD and prompted for a driver
floppy. I've reported this problem before. This laptop has SATA for
both the hard drive and the CD. Earlier versions of d-i were able to
see only one of the CD and hard drive at a time. I believe d-i beta 2
was able to see both when booting from the CD, but I had other
problems and switched back to Ubuntu. Ubuntu Breezy and Dapper both
install perfectly on this laptop.
I also tried copying the kernel and initrd from the CD to the hard
drive and booting with grub:
kernel /debian-installer/vmlinuz ramdisk_size=12000 root=/dev/ram rw
initrd /debian-installer/initrd.gz
boot
In this configuration, the system was able to see both the CD and the
floppy at the same time and I was able to proceed with installation.
I've filed that as a separate installation report.
Reply to: