Your message dated Sat, 20 May 2006 17:30:00 +0200 with message-id <200605201730.00952.elendil@planet.nl> and subject line Bug#368210: installation-report: No problem : installation suceeded. has caused the attached Bug report to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database)
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: installation-report: No problem : installation suceeded.
- From: François Gaudé <francois.gaude@free.fr>
- Date: Sat, 20 May 2006 16:28:13 +0200
- Message-id: <[🔎] 446F277D.4090008@free.fr>
Subject: installation-report: No problem : installation suceeded. Package: installation-reports Version: 2.14 Severity: wishlist -- Package-specific info: Boot method: network Image version: netboot.tar.gz 02 May 2006 Date: 05/06/2006 10:00 Machine: Dell Inspiron 6400 E1505 Partitions: <df -Tl will do; the raw partition table is preferred> Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/sda12 ext3 6854808 2602904 3903696 41% / tmpfs tmpfs 513624 0 513624 0% /dev/shm /dev/sda9 ext3 9614144 281404 8844368 4% /home /dev/sda11 ext3 4807084 131408 4626840 3% /tmp /dev/sda2 ntfs 9767516 5660756 4106760 58% /mnt/XP /dev/sda5 ntfs 34178284 3273412 30904872 10% /mnt/users /dev/sda6 vfat 7800368 322704 7477664 5% /mnt/echange tmpfs tmpfs 513624 140 513484 1% /dev Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [E] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [ ] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Installed system ok: [O] Comments/Problems: Installation boot by network : the package netboot.tar.gz was installed on a PC running under Debian Sarge, providing dhcpd and tftpd-hpa services. Partitions were created before the install (using RIP14, to resize NTFS filesystem, create new FAT and Linux partitions and to keep Dell rescue partitions working). X works with "vesa" driver ; should be "i810" but i810 does not yet supportthe Intel 945GM chipset of this Dell Inspiron 6400 E1505 ; using "915resolution"package gives the native screen 1280x800 resolution. Grub bootloader is installed in the extended partition (not in the MBR), so as to keep the Windows loader "ntldr" as the primary bootloader. At initial install, the CD/DVD reader is detected but not activated :May 6 10:50:00 vautour kernel: ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xBFA8 irq 15 May 6 10:50:00 vautour kernel: ata2: dev 0 cfg 49:0b00 82:0210 83:1000 84:0000 85:0000 86:0000 87:0000 88:0407May 6 10:50:00 vautour kernel: ata2: dev 0 ATAPI, max UDMA/33 May 6 10:50:00 vautour kernel: ata2: dev 0 configured for UDMA/33 May 6 10:50:00 vautour kernel: scsi1 : ata_piixMay 6 10:50:00 vautour kernel: ata2(0): WARNING: ATAPI is disabled, device ignored.Adding the line : libata atapi_enabled=1in /etc/mkinitramfs/modules and running update-initramfs allows correct operationof the CD/DVD reader/writer. The features of initramfs update-initramfs are VERY USEFUL ! Wireless Wifi : chip Intel 3945G not detected. Bluetooth : not tested. Sound : OK.At install time : one processor installed (processor is actually a dual core). To use dual core processor with linux-image-2.6.15-1-686-smp : need to de-activate the BIOS SpeedStep option,else the PC freezes when under load. Thanks to the debian-installer team for this good job ! -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Once you have filled out this report, mail it to submit@bugs.debian.org. ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="3.1 (installer build 20060502)" ============================================== Installer hardware-summary: ==============================================umame -a: Linux vautour 2.6.16-1-486 #2 Tue Apr 25 20:33:31 UTC 2006 i686 unknownlspci -v -t: -[00]-+-00.0 Intel Corporation Mobile Memory Controller Hublspci -v -t: +-02.0 Intel Corporation Mobile Integrated Graphics Controller lspci -v -t: +-02.1 Intel Corporation Mobile Integrated Graphics Controller lspci -v -t: +-1b.0 Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller lspci -v -t: +-1c.0-[0b]----00.0 Intel Corporation: Unknown device 4222lspci -v -t: +-1c.3-[0c-0d]--lspci -v -t: +-1d.0 Intel Corporation 82801G (ICH7 Family) USB UHCI #1 lspci -v -t: +-1d.1 Intel Corporation 82801G (ICH7 Family) USB UHCI #2 lspci -v -t: +-1d.2 Intel Corporation 82801G (ICH7 Family) USB UHCI #3 lspci -v -t: +-1d.3 Intel Corporation 82801G (ICH7 Family) USB UHCI #4 lspci -v -t: +-1d.7 Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller lspci -v -t: +-1e.0-[03]--+-00.0 Broadcom Corporation BCM4401-B0 100Base-TXlspci -v -t: | +-01.0 Ricoh Co Ltd: Unknown device 0832lspci -v -t: | +-01.1 Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapterlspci -v -t: | +-01.2 Ricoh Co Ltd: Unknown device 0843lspci -v -t: | +-01.3 Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter lspci -v -t: | \-01.4 Ricoh Co Ltd xD-Picture Card Controller lspci -v -t: +-1f.0 Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge lspci -v -t: +-1f.2 Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE lspci -v -t: \-1f.3 Intel Corporation 82801G (ICH7 Family) SMBus Controllerlspci -n: 0000:00:00.0 0600: 8086:27a0 (rev 03) lspci -n: 0000:00:02.0 0300: 8086:27a2 (rev 03) lspci -n: 0000:00:02.1 0380: 8086:27a6 (rev 03) lspci -n: 0000:00:1b.0 0403: 8086:27d8 (rev 01) lspci -n: 0000:00:1c.0 0604: 8086:27d0 (rev 01) lspci -n: 0000:00:1c.3 0604: 8086:27d6 (rev 01) lspci -n: 0000:00:1d.0 0c03: 8086:27c8 (rev 01) lspci -n: 0000:00:1d.1 0c03: 8086:27c9 (rev 01) lspci -n: 0000:00:1d.2 0c03: 8086:27ca (rev 01) lspci -n: 0000:00:1d.3 0c03: 8086:27cb (rev 01) lspci -n: 0000:00:1d.7 0c03: 8086:27cc (rev 01) lspci -n: 0000:00:1e.0 0604: 8086:2448 (rev e1) lspci -n: 0000:00:1f.0 0601: 8086:27b9 (rev 01) lspci -n: 0000:00:1f.2 0101: 8086:27c4 (rev 01) lspci -n: 0000:00:1f.3 0c05: 8086:27da (rev 01) lspci -n: 0000:03:00.0 0200: 14e4:170c (rev 02) lspci -n: 0000:03:01.0 0c00: 1180:0832 lspci -n: 0000:03:01.1 0805: 1180:0822 (rev 19) lspci -n: 0000:03:01.2 0880: 1180:0843 (rev 01) lspci -n: 0000:03:01.3 0880: 1180:0592 (rev 0a) lspci -n: 0000:03:01.4 0880: 1180:0852 (rev 05) lspci -n: 0000:0b:00.0 0280: 8086:4222 (rev 02)lspci -v: 0000:00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03)lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: bus master, fast devsel, latency 0 lspci -v: Capabilities: [e0] #09 [5109] lspci -v:lspci -v: 0000:00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: bus master, fast devsel, latency 0, IRQ 11 lspci -v: Memory at dff00000 (32-bit, non-prefetchable) [size=512K] lspci -v: I/O ports at eff8 [size=8] lspci -v: Memory at c0000000 (32-bit, prefetchable) [size=256M] lspci -v: Memory at dfec0000 (32-bit, non-prefetchable) [size=256K]lspci -v: Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-lspci -v: Capabilities: [d0] Power Management version 2 lspci -v:lspci -v: 0000:00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: bus master, fast devsel, latency 0 lspci -v: Memory at dff80000 (32-bit, non-prefetchable) [size=512K] lspci -v: Capabilities: [d0] Power Management version 2 lspci -v:lspci -v: 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: bus master, fast devsel, latency 0, IRQ 10 lspci -v: Memory at dfebc000 (64-bit, non-prefetchable) [size=16K] lspci -v: Capabilities: [50] Power Management version 2lspci -v: Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-lspci -v: Capabilities: [70] #10 [0091] lspci -v:lspci -v: 0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)lspci -v: Flags: bus master, fast devsel, latency 0 lspci -v: Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 lspci -v: Memory behind bridge: dfd00000-dfdfffff lspci -v: Capabilities: [40] #10 [0141]lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+lspci -v: Capabilities: [90] #0d [0000] lspci -v: Capabilities: [a0] Power Management version 2 lspci -v:lspci -v: 0000:00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)lspci -v: Flags: bus master, fast devsel, latency 0 lspci -v: Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0 lspci -v: I/O behind bridge: 0000d000-0000dfff lspci -v: Memory behind bridge: dfa00000-dfcffffflspci -v: Prefetchable memory behind bridge: 00000000d0000000-00000000d0100000lspci -v: Capabilities: [40] #10 [0141]lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+lspci -v: Capabilities: [90] #0d [0000] lspci -v: Capabilities: [a0] Power Management version 2 lspci -v:lspci -v: 0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 209 lspci -v: I/O ports at bf80 [size=32] lspci -v:lspci -v: 0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 217 lspci -v: I/O ports at bf60 [size=32] lspci -v:lspci -v: 0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 225 lspci -v: I/O ports at bf40 [size=32] lspci -v:lspci -v: 0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 233 lspci -v: I/O ports at bf20 [size=32] lspci -v:lspci -v: 0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20)lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 209 lspci -v: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K] lspci -v: Capabilities: [50] Power Management version 2 lspci -v: Capabilities: [58] #0a [20a0] lspci -v:lspci -v: 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) (prog-if 01)lspci -v: Flags: bus master, fast devsel, latency 0 lspci -v: Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 lspci -v: Memory behind bridge: df900000-df9fffff lspci -v: Capabilities: [50] #0d [0000] lspci -v:lspci -v: 0000:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: bus master, medium devsel, latency 0 lspci -v: Capabilities: [e0] #09 [100c] lspci -v:lspci -v: 0000:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01) (prog-if 80 [Master])lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 50 lspci -v: I/O ports at <ignored> lspci -v: I/O ports at <ignored> lspci -v: I/O ports at <ignored> lspci -v: I/O ports at <ignored> lspci -v: I/O ports at bfa0 [size=16] lspci -v: Capabilities: [70] Power Management version 2 lspci -v:lspci -v: 0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: medium devsel, IRQ 4 lspci -v: I/O ports at 10c0 [size=32] lspci -v:lspci -v: 0000:03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)lspci -v: Subsystem: Dell: Unknown device 01af lspci -v: Flags: bus master, fast devsel, latency 64, IRQ 50 lspci -v: Memory at df9fe000 (32-bit, non-prefetchable) [size=8K] lspci -v: Capabilities: [40] Power Management version 2 lspci -v:lspci -v: 0000:03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd: Unknown device 0832 (prog-if 10)lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: bus master, medium devsel, latency 64, IRQ 177 lspci -v: Memory at df9fd800 (32-bit, non-prefetchable) [size=2K] lspci -v: Capabilities: [dc] Power Management version 2 lspci -v:lspci -v: 0000:03:01.1 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) (prog-if 01)lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: bus master, medium devsel, latency 64, IRQ 11 lspci -v: Memory at df9fd400 (32-bit, non-prefetchable) [size=256] lspci -v: Capabilities: [80] Power Management version 2 lspci -v:lspci -v: 0000:03:01.2 System peripheral: Ricoh Co Ltd: Unknown device 0843 (rev 01)lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 11 lspci -v: Memory at df9fd500 (32-bit, non-prefetchable) [size=256] lspci -v: Capabilities: [80] Power Management version 2 lspci -v:lspci -v: 0000:03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: medium devsel, IRQ 11 lspci -v: Memory at df9fd600 (32-bit, non-prefetchable) [size=256] lspci -v: Capabilities: [80] Power Management version 2 lspci -v:lspci -v: 0000:03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)lspci -v: Subsystem: Dell: Unknown device 01bd lspci -v: Flags: medium devsel, IRQ 11 lspci -v: Memory at df9fd700 (32-bit, non-prefetchable) [size=256] lspci -v: Capabilities: [80] Power Management version 2 lspci -v:lspci -v: 0000:0b:00.0 Network controller: Intel Corporation: Unknown device 4222 (rev 02)lspci -v: Subsystem: Intel Corporation: Unknown device 1021 lspci -v: Flags: bus master, fast devsel, latency 0, IRQ 4 lspci -v: Memory at dfdff000 (32-bit, non-prefetchable) [size=4K] lspci -v: Capabilities: [c8] Power Management version 2lspci -v: Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-lspci -v: Capabilities: [e0] #10 [0011] lspci -v:lspci -x: 0000:00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03)lspci -x: 00: 86 80 a0 27 06 00 90 30 03 00 00 06 00 00 00 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 lspci -x:lspci -x: 0000:00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)lspci -x: 00: 86 80 a2 27 07 00 90 00 03 00 00 03 00 00 80 00 lspci -x: 10: 00 00 f0 df f9 ef 00 00 08 00 00 c0 00 00 ec df lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 90 00 00 00 00 00 00 00 0b 01 00 00 lspci -x:lspci -x: 0000:00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)lspci -x: 00: 86 80 a6 27 07 00 90 00 03 00 80 03 00 00 80 00 lspci -x: 10: 00 00 f8 df 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 lspci -x:lspci -x: 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)lspci -x: 00: 86 80 d8 27 06 01 10 00 01 00 03 04 10 00 00 00 lspci -x: 10: 04 c0 eb df 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00 lspci -x:lspci -x: 0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)lspci -x: 00: 86 80 d0 27 07 04 10 00 01 00 04 06 10 00 81 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 0b 0b 00 f0 00 00 20 lspci -x: 20: d0 df d0 df f1 ff 01 00 00 00 00 00 00 00 00 00 lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 02 00 lspci -x:lspci -x: 0000:00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)lspci -x: 00: 86 80 d6 27 07 04 10 00 01 00 04 06 10 00 81 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 0c 0d 00 d0 d0 00 00 lspci -x: 20: a0 df c0 df 01 d0 11 d0 00 00 00 00 00 00 00 00 lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 04 02 00 lspci -x:lspci -x: 0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)lspci -x: 00: 86 80 c8 27 05 00 80 02 01 00 03 0c 00 00 80 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 81 bf 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00 lspci -x:lspci -x: 0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)lspci -x: 00: 86 80 c9 27 05 00 80 02 01 00 03 0c 00 00 00 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 61 bf 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00 lspci -x:lspci -x: 0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)lspci -x: 00: 86 80 ca 27 05 00 80 02 01 00 03 0c 00 00 00 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 41 bf 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 03 00 00 lspci -x:lspci -x: 0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)lspci -x: 00: 86 80 cb 27 05 00 80 02 01 00 03 0c 00 00 00 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 21 bf 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 04 00 00 lspci -x:lspci -x: 0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)lspci -x: 00: 86 80 cc 27 06 01 90 02 01 20 03 0c 00 00 00 00 lspci -x: 10: 00 00 a8 ff 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 09 01 00 00 lspci -x:lspci -x: 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)lspci -x: 00: 86 80 48 24 07 01 10 08 e1 01 04 06 00 00 01 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 03 03 20 f0 00 80 32 lspci -x: 20: 90 df 90 df f1 ff 01 00 00 00 00 00 00 00 00 00 lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 02 00 lspci -x:lspci -x: 0000:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)lspci -x: 00: 86 80 b9 27 07 01 10 02 01 00 01 06 00 00 80 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 lspci -x:lspci -x: 0000:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01)lspci -x: 00: 86 80 c4 27 05 00 b0 02 01 80 01 01 00 00 00 00 lspci -x: 10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00 lspci -x: 20: a1 bf 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 70 00 00 00 00 00 00 00 04 02 00 00 lspci -x:lspci -x: 0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)lspci -x: 00: 86 80 da 27 01 01 80 02 01 00 05 0c 00 00 00 00 lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: c1 10 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 04 02 00 00 lspci -x:lspci -x: 0000:03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)lspci -x: 00: e4 14 0c 17 06 01 10 08 02 00 00 02 00 40 00 00 lspci -x: 10: 00 e0 9f df 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 af 01 lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 04 01 00 00 lspci -x:lspci -x: 0000:03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd: Unknown device 0832lspci -x: 00: 80 11 32 08 06 01 10 02 00 10 00 0c 00 40 80 00 lspci -x: 10: 00 d8 9f df 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 03 01 02 04 lspci -x:lspci -x: 0000:03:01.1 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)lspci -x: 00: 80 11 22 08 06 01 10 02 19 01 05 08 00 40 80 00 lspci -x: 10: 00 d4 9f df 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 02 00 00 lspci -x:lspci -x: 0000:03:01.2 System peripheral: Ricoh Co Ltd: Unknown device 0843 (rev 01)lspci -x: 00: 80 11 43 08 06 01 10 02 01 00 80 08 00 00 80 00 lspci -x: 10: 00 d5 9f df 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 02 00 00 lspci -x:lspci -x: 0000:03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)lspci -x: 00: 80 11 92 05 02 01 10 02 0a 00 80 08 00 00 80 00 lspci -x: 10: 00 d6 9f df 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 02 00 00 lspci -x:lspci -x: 0000:03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)lspci -x: 00: 80 11 52 08 02 01 10 02 05 00 80 08 00 00 80 00 lspci -x: 10: 00 d7 9f df 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01 lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 02 00 00 lspci -x:lspci -x: 0000:0b:00.0 Network controller: Intel Corporation: Unknown device 4222 (rev 02)lspci -x: 00: 86 80 22 42 06 01 10 00 02 00 80 02 10 00 00 00 lspci -x: 10: 00 f0 df df 00 00 00 00 00 00 00 00 00 00 00 00 lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 21 10 lspci -x: 30: 00 00 00 00 c8 00 00 00 00 00 00 00 04 01 00 00 lspci -x: lsmod: Module Size Used by lsmod: nls_cp437 5888 0 lsmod: nls_iso8859_1 4224 6 lsmod: qnx4 10612 0 lsmod: ntfs 189580 0 lsmod: xfs 483476 0 lsmod: exportfs 5248 1 xfs lsmod: reiserfs 218352 0 lsmod: jfs 158556 0 lsmod: ext3 115976 3 lsmod: jbd 46996 1 ext3 lsmod: vfat 11520 0 lsmod: fat 46876 1 vfat lsmod: sr_mod 16036 0 lsmod: isofs 32192 0 lsmod: ide_cd 35488 0 lsmod: cdrom 32176 2 sr_mod,ide_cd lsmod: ide_disk 14976 0 lsmod: ide_generic 1408 0 [permanent] lsmod: aec62xx 6784 0 [permanent] lsmod: alim15x3 11024 0 [permanent] lsmod: amd74xx 12956 0 [permanent] lsmod: atiixp 5392 0 [permanent] lsmod: cmd64x 10012 0 [permanent] lsmod: cs5520 4608 0 [permanent] lsmod: cs5530 4864 0 [permanent] lsmod: cs5535 4224 0 [permanent] lsmod: cy82c693 4356 0 [permanent] lsmod: hpt34x 4992 0 [permanent] lsmod: it821x 7812 0 [permanent] lsmod: ns87415 4268 0 [permanent] lsmod: opti621 4100 0 [permanent] lsmod: pdc202xx_new 8064 0 [permanent] lsmod: pdc202xx_old 9600 0 [permanent] lsmod: piix 9092 0 [permanent] lsmod: rz1000 2688 0 [permanent] lsmod: sc1200 6656 0 [permanent] lsmod: serverworks 8328 0 [permanent] lsmod: siimage 11008 0 [permanent] lsmod: sis5513 12300 0 [permanent] lsmod: slc90e66 5120 0 [permanent] lsmod: triflex 3712 0 [permanent] lsmod: trm290 4100 0 [permanent] lsmod: via82cxxx 8196 0 [permanent] lsmod: usb_storage 69696 0 lsmod: sd_mod 16528 5 lsmod: generic 4356 0 [permanent]lsmod: ide_core 111280 30 ide_cd,ide_disk,ide_generic,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_new,pdc202xx_old,piix,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,genericlsmod: ata_piix 9988 4 lsmod: libata 52752 1 ata_piix lsmod: rsrc_nonstatic 12160 0 lsmod: pcmcia_core 37392 1 rsrc_nonstatic lsmod: sbp2 19460 0 lsmod: scsi_mod 122444 5 sr_mod,usb_storage,sd_mod,libata,sbp2 lsmod: eth1394 18180 0 lsmod: vga16fb 11528 2 lsmod: vgastate 7680 1 vga16fb lsmod: usbhid 32352 0 lsmod: thermal 13192 0 lsmod: processor 21696 1 thermal lsmod: fan 4740 0 lsmod: ohci1394 29488 0 lsmod: ieee1394 85816 3 sbp2,eth1394,ohci1394 lsmod: b44 22156 0 lsmod: mii 5248 1 b44 lsmod: ehci_hcd 27144 0 lsmod: uhci_hcd 27152 0 lsmod: usbcore 111008 5 usb_storage,usbhid,ehci_hcd,uhci_hcd df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 513756 460 513296 0% /dev df: tmpfs 513756 460 513296 0% /dev df: tmpfs 513756 460 513296 0% /.devdf: /dev/scsi/host0/bus0/target0/lun0/part12 6854808 2158448 4348152 33% /target df: /dev/scsi/host0/bus0/target0/lun0/part9 9614144 131276 8994496 1% /target/home df: /dev/scsi/host0/bus0/target0/lun0/part11 4807084 131268 4626980 3% /target/tmp free: total used free shared buffers free: Mem: 1027516 1005388 22128 0 54360free: Swap: 64248 456 63792 free: Total: 1091764 1005844 85920 cardctl status: /usr/bin/report-hw: 32: cardctl: not found cardctl ident: /usr/bin/report-hw: 33: cardctl: not found /proc/cpuinfo: processor : 0 /proc/cpuinfo: vendor_id : GenuineIntel /proc/cpuinfo: cpu family : 6 /proc/cpuinfo: model : 14/proc/cpuinfo: model name : Genuine Intel(R) CPU T2300 @ 1.66GHz/proc/cpuinfo: stepping : 8 /proc/cpuinfo: cpu MHz : 1663.060 /proc/cpuinfo: cache size : 2048 KB /proc/cpuinfo: fdiv_bug : no /proc/cpuinfo: hlt_bug : no /proc/cpuinfo: f00f_bug : no /proc/cpuinfo: coma_bug : no /proc/cpuinfo: fpu : yes /proc/cpuinfo: fpu_exception : yes /proc/cpuinfo: cpuid level : 10 /proc/cpuinfo: wp : yes/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc pni monitor vmx est tm2 xtpr/proc/cpuinfo: bogomips : 3331.53 /proc/cpuinfo: /proc/ioports: 0000-001f : dma1 /proc/ioports: 0020-0021 : pic1 /proc/ioports: 0040-0043 : timer0 /proc/ioports: 0050-0053 : timer1 /proc/ioports: 0060-006f : keyboard /proc/ioports: 0080-008f : dma page reg /proc/ioports: 00a0-00a1 : pic2 /proc/ioports: 00c0-00df : dma2 /proc/ioports: 00f0-00ff : fpu /proc/ioports: 0170-0177 : libata /proc/ioports: 01f0-01f7 : libata /proc/ioports: 03c0-03df : vga+ /proc/ioports: 04d0-04d1 : pnp 00:02 /proc/ioports: 0910-091f : pnp 00:08 /proc/ioports: 0920-092f : pnp 00:08 /proc/ioports: 0940-097f : pnp 00:08 /proc/ioports: 0c80-0cff : pnp 00:08 /proc/ioports: 0cb0-0cbf : pnp 00:08 /proc/ioports: 1000-1005 : motherboard /proc/ioports: 1000-1003 : PM1a_EVT_BLK /proc/ioports: 1004-1005 : PM1a_CNT_BLK /proc/ioports: 1006-1007 : motherboard /proc/ioports: 1006-1007 : pnp 00:03 /proc/ioports: 1008-100f : motherboard /proc/ioports: 1008-100b : PM_TMR /proc/ioports: 1010-102f : motherboard /proc/ioports: 1010-1015 : ACPI CPU throttle /proc/ioports: 1020-1020 : PM2_CNT_BLK /proc/ioports: 1028-102f : GPE0_BLK /proc/ioports: 1060-107f : motherboard /proc/ioports: 1060-107f : pnp 00:03 /proc/ioports: 1080-10bf : motherboard /proc/ioports: 1080-10bf : pnp 00:03 /proc/ioports: 10c0-10df : 0000:00:1f.3 /proc/ioports: 10c0-10df : motherboard /proc/ioports: 10c0-10df : pnp 00:03 /proc/ioports: bf20-bf3f : 0000:00:1d.3 /proc/ioports: bf20-bf3f : uhci_hcd /proc/ioports: bf40-bf5f : 0000:00:1d.2 /proc/ioports: bf40-bf5f : uhci_hcd /proc/ioports: bf60-bf7f : 0000:00:1d.1 /proc/ioports: bf60-bf7f : uhci_hcd /proc/ioports: bf80-bf9f : 0000:00:1d.0 /proc/ioports: bf80-bf9f : uhci_hcd /proc/ioports: bfa0-bfaf : 0000:00:1f.2 /proc/ioports: bfa0-bfaf : libata /proc/ioports: d000-dfff : PCI Bus #0c /proc/ioports: eff8-efff : 0000:00:02.0 /proc/ioports: f400-f4fe : motherboard /proc/ioports: f400-f4fe : pnp 00:03 /proc/iomem: 00000000-0009efff : System RAM /proc/iomem: 00000000-00000000 : Crash kernel /proc/iomem: 0009f000-0009ffff : reserved /proc/iomem: 000a0000-000bffff : Video RAM area /proc/iomem: 000c0000-000c7fff : Video ROM /proc/iomem: 000ce800-000cffff : Adapter ROM /proc/iomem: 000d0000-000d0fff : Adapter ROM /proc/iomem: 000d1000-000d3fff : Adapter ROM /proc/iomem: 000f0000-000fffff : System ROM /proc/iomem: 00100000-3f6d33ff : System RAM /proc/iomem: 00100000-00273192 : Kernel code /proc/iomem: 00273193-00301c23 : Kernel data /proc/iomem: 3f6d3400-3fffffff : reserved /proc/iomem: c0000000-cfffffff : 0000:00:02.0 /proc/iomem: d0000000-d01fffff : PCI Bus #0c /proc/iomem: df900000-df9fffff : PCI Bus #03 /proc/iomem: df9fd400-df9fd4ff : 0000:03:01.1 /proc/iomem: df9fd500-df9fd5ff : 0000:03:01.2 /proc/iomem: df9fd600-df9fd6ff : 0000:03:01.3 /proc/iomem: df9fd700-df9fd7ff : 0000:03:01.4 /proc/iomem: df9fd800-df9fdfff : 0000:03:01.0 /proc/iomem: df9fd800-df9fdfff : ohci1394 /proc/iomem: df9fe000-df9fffff : 0000:03:00.0 /proc/iomem: df9fe000-df9fffff : b44 /proc/iomem: dfa00000-dfcfffff : PCI Bus #0c /proc/iomem: dfd00000-dfdfffff : PCI Bus #0b /proc/iomem: dfdff000-dfdfffff : 0000:0b:00.0 /proc/iomem: dfebc000-dfebffff : 0000:00:1b.0 /proc/iomem: dfec0000-dfefffff : 0000:00:02.0 /proc/iomem: dff00000-dff7ffff : 0000:00:02.0 /proc/iomem: dff80000-dfffffff : 0000:00:02.1 /proc/iomem: e0000000-f0006fff : reserved /proc/iomem: f0008000-f000bfff : reserved /proc/iomem: fec00000-fec0ffff : reserved /proc/iomem: fed20000-fed9ffff : reserved /proc/iomem: fee00000-fee0ffff : reserved /proc/iomem: ffa80000-ffa803ff : 0000:00:1d.7 /proc/iomem: ffa80000-ffa803ff : ehci_hcd /proc/iomem: ffb00000-ffffffff : reserved/proc/interrupts: CPU0 /proc/interrupts: 0: 2485557 IO-APIC-edge timer/proc/interrupts: 1: 1618 IO-APIC-edge i8042 /proc/interrupts: 9: 2 IO-APIC-level acpi /proc/interrupts: 14: 85908 IO-APIC-edge libata /proc/interrupts: 15: 2 IO-APIC-edge libata /proc/interrupts: 50: 557618 IO-APIC-level eth0 /proc/interrupts: 177: 2 IO-APIC-level ohci1394/proc/interrupts: 209: 2 IO-APIC-level uhci_hcd:usb1, ehci_hcd:usb5/proc/interrupts: 217: 0 IO-APIC-level uhci_hcd:usb2 /proc/interrupts: 225: 31 IO-APIC-level uhci_hcd:usb3 /proc/interrupts: 233: 0 IO-APIC-level uhci_hcd:usb4 /proc/interrupts: NMI: 0 /proc/interrupts: LOC: 1084167 /proc/interrupts: ERR: 0 /proc/interrupts: MIS: 0 /proc/meminfo: MemTotal: 1027516 kB /proc/meminfo: MemFree: 22096 kB /proc/meminfo: Buffers: 54360 kB /proc/meminfo: Cached: 872900 kB /proc/meminfo: SwapCached: 0 kB /proc/meminfo: Active: 404544 kB /proc/meminfo: Inactive: 537124 kB /proc/meminfo: HighTotal: 0 kB /proc/meminfo: HighFree: 0 kB /proc/meminfo: LowTotal: 1027516 kB /proc/meminfo: LowFree: 22096 kB /proc/meminfo: SwapTotal: 64248 kB /proc/meminfo: SwapFree: 63792 kB /proc/meminfo: Dirty: 3976 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: Mapped: 16060 kB /proc/meminfo: Slab: 53896 kB /proc/meminfo: CommitLimit: 578004 kB /proc/meminfo: Committed_AS: 22792 kB /proc/meminfo: PageTables: 216 kB /proc/meminfo: VmallocTotal: 261840 kB /proc/meminfo: VmallocUsed: 8300 kB /proc/meminfo: VmallocChunk: 252636 kB /proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 /proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard" /proc/bus/input/devices: P: Phys=isa0060/serio0/input0 /proc/bus/input/devices: S: Sysfs=/class/input/input0 /proc/bus/input/devices: H: Handlers=kbd /proc/bus/input/devices: B: EV=120013/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe/proc/bus/input/devices: B: MSC=10 /proc/bus/input/devices: B: LED=7 /proc/bus/input/devices: /proc/bus/input/devices: I: Bus=0003 Vendor=046d Product=c016 Version=0340 /proc/bus/input/devices: N: Name="Logitech Optical USB Mouse" /proc/bus/input/devices: P: Phys=usb-0000:00:1d.2-1/input0 /proc/bus/input/devices: S: Sysfs=/class/input/input1 /proc/bus/input/devices: H: Handlers= /proc/bus/input/devices: B: EV=7 /proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0 /proc/bus/input/devices: B: REL=103 /proc/bus/input/devices: dmidecode: /usr/bin/report-hw: 41: dmidecode: not found ============================================== Installer status: ============================================== Package: preseed-common Status: install ok unpacked Version: 1.15 Depends: di-utils (>= 1.14) Description: common files for preseeding Package: udpkg Status: install ok unpacked Version: 1.04 Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41) Description: tiny dpkg clone Package: localechooser Status: install ok installed Version: 1.13 Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15) Description: choose language/country/locale Installer-Menu-Item: 10 Package: nic-extra-modules-2.6.16-1-486-di Status: install ok unpacked Version: 1.29 Provides: nic-extra-modulesDepends: kernel-image-2.6.16-1-486-di, nic-shared-modules-2.6.16-1-486-di, firmware-modules-2.6.16-1-486-di, crc-modules-2.6.16-1-486-diDescription: Rare NIC drivers Package: nic-shared-modules-2.6.16-1-486-di Status: install ok unpacked Version: 1.29 Provides: nic-shared-modules Depends: kernel-image-2.6.16-1-486-di Description: Shared NIC drivers Package: libnss-dns-udeb Status: install ok unpacked Version: 2.3.6-7 Description: GNU C Library: NSS helper for DNS - udeb Package: download-installer Status: install ok installed Version: 1.10 Depends: net-retriever, anna (>= 1.07) Description: Download installer components Installer-Menu-Item: 23 Package: lowmemcheck Status: install ok unpacked Version: 1.17 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03) Description: detect low-memory systems and enter lowmem mode Package: main-menu Status: install ok unpacked Version: 1.12Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.41), cdebconf-udebDescription: Debian installer main menu Package: di-utils-shell Status: install ok unpacked Version: 1.27 Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18) Description: Execute a shell Installer-Menu-Item: 950 Package: di-utils Status: install ok installed Version: 1.27 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41) Description: Miscellaneous utilities for the debian installer Package: scsi-core-modules-2.6.16-1-486-di Status: install ok unpacked Version: 1.29 Provides: scsi-core-modules Depends: kernel-image-2.6.16-1-486-di Description: Core SCSI subsystem Package: choose-mirror Status: install ok installed Version: 1.21Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.41), cdebconf-udeb, configured-networkDescription: Choose mirror to install from Installer-Menu-Item: 23 Package: network-preseed Status: install ok unpacked Version: 1.15 Depends: configured-network, preseed-common Description: download debconf preseed file Installer-Menu-Item: 21 Package: cdebconf-newt-udeb Status: install ok unpacked Version: 0.100+b1 Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52 Description: Newt frontend for Debian Configuration Management System Package: nic-modules-2.6.16-1-486-di Status: install ok unpacked Version: 1.29 Provides: nic-modulesDepends: kernel-image-2.6.16-1-486-di, nic-shared-modules-2.6.16-1-486-di, firmware-modules-2.6.16-1-486-di, firewire-core-modules-2.6.16-1-486-diDescription: Common NIC drivers Package: module-init-tools-udeb Status: install ok unpacked Version: 3.2.2-2 Depends: libc6 (>= 2.3.5-1) Description: tools for managing Linux kernel modules Package: rootskel Status: install ok installed Version: 1.31 Depends: di-utils (>= 1.24) Description: Skeleton root filesystem used by debian-installer Package: udev-udeb Status: install ok unpacked Version: 0.091-1 Depends: libc6 (>= 2.3.6-6) Description: /dev/ and hotplug management daemon Package: libfribidi0-udeb Status: install ok unpacked Version: 0.10.7-3 Depends: libc6 (>= 2.3.5-1) Description: Free Implementation of the Unicode BiDi algorithm Package: rescue-check Status: install ok unpacked Version: 1.3 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18) Description: enter d-i rescue mode if requested Package: nano-udeb Status: install ok unpacked Version: 1.3.11-2 Provides: editor Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.1-1) Description: free Pico clone with some new features - tiny build Package: cdebconf-udeb Status: install ok installed Version: 0.100+b1 Provides: debconf-2.0Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41), libtextwrap1 (>> 0.01-0)Description: Debian Configuration Management System (C-implementation) Package: libiw28-udeb Status: install ok installed Version: 28-1 Depends: libc6 (>= 2.3.5-1) Description: Tools for manipulating Linux Wireless Extensions Package: nic-pcmcia-modules-2.6.16-1-486-di Status: install ok unpacked Version: 1.29 Provides: nic-pcmcia-modulesDepends: kernel-image-2.6.16-1-486-di, nic-shared-modules-2.6.16-1-486-di, nic-extra-modules-2.6.16-1-486-di, pcmcia-modules-2.6.16-1-486-diDescription: Common PCMCIA NIC drivers Package: firewire-core-modules-2.6.16-1-486-di Status: install ok unpacked Version: 1.29 Provides: firewire-core-modules Depends: scsi-core-modules-2.6.16-1-486-di, kernel-image-2.6.16-1-486-di Description: Core FireWire drivers Package: cdebconf-text-udeb Status: install ok unpacked Version: 0.100+b1 Depends: cdebconf-udeb, libc6 (>= 2.3.6-6) Description: Plain text frontend for Debian Configuration Management System Package: kernel-image-2.6.16-1-486-di Status: install ok unpacked Version: 1.29 Provides: kernel-image, ext2-modules Description: Linux kernel binary image for the Debian installer Package: fb-modules-2.6.16-1-486-di Status: install ok unpacked Version: 1.29 Provides: fb-modules Depends: kernel-image-2.6.16-1-486-di Description: Frame buffer support Package: iso-3166-udeb Status: install ok installed Version: 0.51-1 Description: provides iso_3166.tab file Package: floppy-retriever Status: install ok unpacked Version: 1.08 Provides: retriever Depends: mountfloppy Description: Fetches modules from a floppy Package: input-modules-2.6.16-1-486-di Status: install ok unpacked Version: 1.29 Provides: input-modules Depends: kernel-image-2.6.16-1-486-di, usb-modules-2.6.16-1-486-di Description: Input devices support Package: ethdetect Status: install ok installed Version: 1.35 Provides: ethernet-card-detectionDepends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)Description: Detect network hardware and load kernel drivers for it Installer-Menu-Item: 15 Package: pcmcia-modules-2.6.16-1-486-di Status: install ok unpacked Version: 1.29 Provides: pcmcia-modules Depends: kernel-image-2.6.16-1-486-di, firmware-modules-2.6.16-1-486-di Description: Common PCMCIA drivers Package: busybox-udeb Status: install ok unpacked Version: 1:1.01-4 Depends: libc6 (>= 2.3.5-1) Description: Tiny utilities for the debian-installer Package: initrd-preseed Status: install ok unpacked Version: 1.15 Depends: preseed-common Description: load debconf preseed file from /preseed.cfg on the initrd Package: net-retriever Status: install ok installed Version: 1.10 Provides: retriever Depends: choose-mirror, configured-network, di-utils (>= 1.16) Description: Fetch modules from the Internet Package: archdetect Status: install ok installed Version: 1.35 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41) Description: Hardware architecture detector Package: save-logs Status: install ok unpacked Version: 2.14 Description: save logs and configuration for debug purposes Installer-Menu-Item: 940 Package: di-utils-reboot Status: install ok unpacked Version: 1.27 Description: Reboot Installer-Menu-Item: 995 Package: anna Status: install ok installed Version: 1.23Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.41), cdebconf-udebDescription: anna's not nearly apt, but for the Debian installer, it will do Package: libsysfs2-udeb Status: install ok unpacked Version: 2.0.0-6 Provides: libsysfs2 Depends: libc6 (>= 2.3.5-1) Description: interface library to sysfs Package: pcmciautils-udeb Status: install ok unpacked Version: 013-1 Depends: udev-udeb, libc6 (>= 2.3.5-1), libsysfs2-udeb Description: PCMCIA utilities for Linux 2.6 Package: pciutils-udeb Status: install ok unpacked Version: 1:2.1.11-16 Depends: libc6 (>= 2.3.5-1) Description: Linux PCI Utilities (udeb) Package: console-keymaps-at Status: install ok installed Version: 20060421 Provides: console-keymaps Depends: cdebconf-udeb Description: Keymaps for PC-style (PS/2 and AT) keyboards Package: di-utils-terminfo Status: install ok unpacked Version: 1.27 Description: Terminfo entries needed by newt/slang in debian installer Package: floppy-modules-2.6.16-1-486-di Status: install ok unpacked Version: 1.29 Provides: floppy-modules Depends: kernel-image-2.6.16-1-486-di Description: Floppy driver Package: hw-detect Status: install ok installed Version: 1.35Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.26)Description: Detect hardware and load kernel drivers for it Package: kbd-chooser Status: install ok installed Version: 1.25Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.41), cdebconf-udeb, console-keymapsDescription: Detect a keyboard and select layout Installer-Menu-Item: 12 Package: libdebian-installer4-udeb Status: install ok installed Version: 0.41 Depends: libc6 (>= 2.3.5-1) Description: Library of common debian-installer functions Package: acpi-modules-2.6.16-1-486-di Status: install ok unpacked Version: 1.29 Provides: acpi-modules Depends: kernel-image-2.6.16-1-486-di Description: ACPI support modules Package: firmware-modules-2.6.16-1-486-di Status: install ok unpacked Version: 1.29 Provides: firmware-modules Depends: kernel-image-2.6.16-1-486-di Description: Firmware request modules Package: installation-locale Status: install ok unpacked Version: 1.1 Depends: rootskel Description: UTF-8 C locale Package: env-preseed Status: install ok unpacked Version: 1.15 Description: debconf preseeding via environment variables Package: mountfloppy Status: install ok unpacked Version: 0.5 Depends: di-utils (>= 1.15) Description: Mounts a floppy Package: cdebconf-priority Status: install ok unpacked Version: 0.100 Depends: cdebconf-udeb Description: Change debconf priority Installer-Menu-Item: 930 Package: netcfg Status: install ok installed Version: 1.25 Provides: configured-networkDepends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.41), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detectionDescription: Configure the network Installer-Menu-Item: 18 Package: usb-modules-2.6.16-1-486-di Status: install ok unpacked Version: 1.29 Provides: usb-modules Depends: kernel-image-2.6.16-1-486-di Description: USB support Package: crc-modules-2.6.16-1-486-di Status: install ok unpacked Version: 1.29 Provides: crc-modules Depends: kernel-image-2.6.16-1-486-di Description: CRC modules Package: dhcp-client-udeb Status: install ok installed Version: 2.0pl5-19.4 Depends: libc6 (>= 2.3.5-1) Description: DHCP Client for debian-installer Package: libdebconfclient0-udeb Status: install ok installed Version: 0.100+b1 Depends: libc6 (>= 2.3.6-6), cdebconf-udeb Description: Debian Configuration Management System (C-implementation) Package: bogl-bterm-udeb Status: install ok unpacked Version: 0.1.18-1.4 Provides: editor Depends: libc-udeb Description: Ben's Own Graphics Library - graphical terminal Package: fat-modules-2.6.16-1-486-di Status: install ok unpacked Version: 1.29 Provides: fat-modules Depends: kernel-image-2.6.16-1-486-di Description: FAT filesystem support Package: debian-installer Status: install ok installed Version: netboot-2.6-20060502 Description: debian installation image Package: apt-mirror-setup Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 100 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.10 Depends: choose-mirror Description: set up a mirror in sources.list Package: apt-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 88 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.10 Depends: apt-mirror-setup, base-installer (>= 1.49) Description: Configure apt Installer-Menu-Item: 70 Package: base-installer Status: install ok installed Priority: required Section: debian-installer Installed-Size: 532 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.56Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.41), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab, archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)Provides: kernel-installer Description: Install the base system Installer-Menu-Item: 65 Package: cdebconf-newt-entropy Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 40 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.2 Depends: cdebconf-newt-udeb, libc6 (>= 2.3.5-1), libnewt0.52 Description: cdebconf newt plugin for reading from /dev/random cdebconf plugin to facilitate reading random data from /dev/random. Asks the user to enter random characters on the keyboard and shows a progressbar with percent-of-data read. Package: cdrom-core-modules-2.6.16-1-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 140 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29Depends: kernel-image-2.6.16-1-486-di, scsi-core-modules-2.6.16-1-486-di, ide-modules-2.6.16-1-486-diProvides: cdrom-core-modules Description: CDROM support This package contains core CDROM support for the Linux kernel. Package: clock-setup Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 64 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.9 Depends: os-prober, tzsetup-udeb, mounted-partitions Description: set up clock Installer-Menu-Item: 62 Package: debootstrap-udeb Status: install ok installed Priority: required Section: debian-installer Installed-Size: 168 Maintainer: Anthony Towns <ajt@debian.org> Version: 0.3.3 Depends: libc6 (>= 2.3.5-1), mounted-partitions Description: Bootstrap the Debian system debootstrap is used to create a Debian base system from scratch, without requiring the availability of dpkg or apt. It does this by downloading .deb files from a mirror site, and carefully unpacking them into a directory which can eventually be chrooted into. . debootstrap-udeb is a minimal package used by debian-installer. Package: di-utils-mapdevfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 16 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.27 Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41) Description: mapdevfs utility for the debian installer Package: disk-detect Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 60 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.35 Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13) Provides: harddrive-detection Description: Detect disk drives Installer-Menu-Item: 35 Package: e2fsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 352 Maintainer: Theodore Y. Ts'o <tytso@mit.edu> Version: 1.38+1.39-WIP-2006.04.09-1 Depends: libblkid1-udeb, libc6 (>= 2.3.5-1) Description: stripped-down versions of e2fsprogs, for debian-installer This package is an e2fsprogs package built for a reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway it should refuse to install. Package: ext3-modules-2.6.16-1-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 240 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29 Depends: kernel-image-2.6.16-1-486-di Provides: ext3-modules Description: EXT3 filesystem support This package contains the EXT3 filesystem module for the Linux kernel. Package: fdisk-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 140 Maintainer: LaMont Jones <lamont@debian.org> Version: 2.12r-8 Depends: libc6 (>= 2.3.5-1) Description: Partition a hard drive (manual) fdisk package Package: grub-installer Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 276 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.14Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>= 1.15), di-utils-mapdevfs, os-proberProvides: bootable-system Description: Install GRUB on a hard disk Installer-Menu-Item: 73 Package: ide-core-modules-2.6.16-1-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 148 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29 Depends: kernel-image-2.6.16-1-486-di Provides: ide-core-modules Description: IDE support This package contains core IDE support for the Linux kernel. Package: ide-modules-2.6.16-1-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 420 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29 Depends: kernel-image-2.6.16-1-486-di, ide-core-modules-2.6.16-1-486-di Provides: ide-modules Description: IDE drivers This package contains IDE drivers for the Linux kernel. Package: jfs-modules-2.6.16-1-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 216 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29 Depends: kernel-image-2.6.16-1-486-di Provides: jfs-modules Description: JFS filesystem support This package contains the JFS filesystem module for the Linux kernel. Package: jfsutils-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 1024 Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de> Version: 1.1.8-1 Description: A stripped-down version of jfsutils, for debian-installer This package is a jfsutils package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. Package: libblkid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 40 Maintainer: Theodore Y. Ts'o <tytso@mit.edu> Version: 1.38+1.39-WIP-2006.04.09-1 Depends: libc6 (>= 2.3.5-1) Provides: libblkid1 Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This is a minimal package for debian-installer. Package: libc6-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 1564 Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org> Version: 2.3.6-7 Provides: libc6, libc-udeb, glibc-2.3.6-2, glibc-2.3.5-3 Description: GNU C Library: Shared libraries - udeb Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. . This package contains a minimal set of libraries needed for the Debian installer. Do not install it on a normal system. Package: libdevmapper1.02-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 68 Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org> Version: 2:1.02.03-1 Depends: libc6 (>= 2.3.5-1) Provides: libdevmapper1.02 Description: The Linux Kernel Device Mapper userspace library This is a udeb, or a microdeb, for the debian-installer. . The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but EVMS, software raid, and other drivers that create "virtual" block devices. Package: libparted1.6-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 320Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>Version: 1.6.25.1-3 Depends: libc6 (>= 2.3.6-6), libuuid1-udeb Provides: libparted1.6-13 Description: The GNU Parted disk partitioning shared library GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package contains libparted, the required shared library used by Parted. This is a cut-down package with no normal documentation intended to be used in debian-installer. . Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and PC98 disklabels/partition tables, as well as a 'loop' (raw disk) type which allows use on RAID/LVM. Filesystems which are currently fully supported are ext2, ext3, fat (FAT16 and FAT32), ReiserFS (with libreiserfs) and linux-swap. Parted can also detect and remove HFS (Mac OS), JFS, NTFS, UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems, but cannot create, resize or check these filesystems yet. . Note that ReiserFS support is only enabled if you install the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been removed from sarge, ReiserFS support is not compiled in the default package. . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: libuuid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 20 Maintainer: Theodore Y. Ts'o <tytso@mit.edu> Version: 1.38+1.39-WIP-2006.04.09-1 Depends: libc6 (>= 2.3.5-1) Provides: libuuid1 Description: universally unique id library libuuid generates and parses 128-bit universally unique id's (UUID's), using a standard which is blessed by both Microsoft and DCE, and is being proposed as an internet standard. See the internet-draft: . draft-leach-uuids-guids-01.txt . for more information. . This is a minimal package for debian-installer. Package: lilo-installer Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 172 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.15Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15), di-utils-mapdevfs, fdisk-udeb, os-proberProvides: bootable-system Description: Install LILO on a hard disk Installer-Menu-Item: 75 Package: loop-aes-2.6.16-1-486-di Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 148 Maintainer: Max Vozeler <xam@debian.org> Version: 3.1d+3 Depends: kernel-image-2.6.16-1-486-di, mount-aes-udeb (>= 2.12p-1) Provides: loop-aes-modules Description: loop-AES encryption modules for kernel 2.6.16-1-486-di This package contains the loop-AES loadable Linux kernel modules compiled for kernel 2.6.16-1-486-di . loop-AES can be used to encrypt disk partitions, removable media, swap space and other devices. It provides measures to strengthen the encryption: Passphrase seeds, multiple hash iterations, MD5 IV and use of alternating encryption keys. . Encryption keys can be stored in a GnuPG-encrypted keyfile, which allows the passphrase to be changed without re-encryption. Keyfiles can also be encrypted asymmetrically for multi-user access. . This package includes the cipher modules blowfish, twofish and serpent in addition to the default cipher (AES). . If you compiled a custom kernel, you will most likely need to compile a custom version of these modules as well. The package loop-aes-source has been provided for this purpose. Package: loop-modules-2.6.16-1-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 52 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29 Depends: kernel-image-2.6.16-1-486-di Provides: loop-modules Description: Loopback filesystem support This package contains loopback filesystem support for the Linux kernel. Package: lvm2-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 400 Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org> Version: 2.02.02-1 Depends: libc6 (>= 2.3.5-1), libdevmapper1.02 (>= 2:1.02.02-2) Description: The Linux Logical Volume Manager This is a udeb, or a microdeb, for the debian-installer. . This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM supports enterprise level volume management of disk and disk subsystems by grouping arbitrary disks into volume groups. The total capacity of volume groups can be allocated to logical volumes, which are accessed as regular block devices. Package: lvmcfg-utils Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 428 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.09Depends: cdebconf-udeb, md-modules, lvm2-udeb, parted-udeb, di-utils (>= 1.15)Description: lvmcfg without the main menu item Package: md-modules-2.6.16-1-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 340 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29 Depends: kernel-image-2.6.16-1-486-di Provides: md-modules Description: RAID and LVM support This package contains RAID and LVM modules for the Linux kernel. Package: mdadm-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 96Maintainer: Debian/Ubuntu mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>Version: 1.12.0-1 Depends: libc6 (>= 2.3.5-1) Description: tool to administer Linux md device arrays (software RAID) mdadm is a program that can be used to create, manage, and monitor MD devices. . mdadm-udeb is a minimal package used by the debian-installer. Package: mdcfg-utils Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 312 Maintainer: Paul Fleischer <proguy@proguy.dk> Version: 1.14 Depends: cdebconf-udeb, md-modules, mdadm-udeb, partconf-find-partitions Description: Configure MD devices Use this module to configure the MD devices. Package: mkreiserfs-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 148 Maintainer: Ed Boraas <ed@debian.org> Version: 1:3.6.19-2 Depends: libc6 (>= 2.3.5-1), libuuid1 Description: User-level tools for ReiserFS filesystems This installer module contains the utility to create ReiserFS filesystems. . Homepage: http://www.namesys.com/ Package: mount-aes-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 200 Maintainer: Max Vozeler <xam@debian.org> Version: 2.12r-8 Depends: libblkid1 (>= 1.37-1), libc6 (>= 2.3.5-1), libuuid1-udeb Description: Mount utils for loop-AES loop-AES patched mount, losetup and swapon Package: nic-usb-modules-2.6.16-1-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 188 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29Depends: kernel-image-2.6.16-1-486-di, nic-shared-modules-2.6.16-1-486-di, usb-modules-2.6.16-1-486-di, firmware-modules-2.6.16-1-486-diProvides: nic-usb-modules Description: USB NIC drivers This package contains USB network adapter drivers for the Linux kernel. Package: nobootloader Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 116 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.08 Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs Provides: bootable-system Description: Don't install any bootloader. This package will skip installing a boot-loader Installer-Menu-Item: 77 Package: ntfstools-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 164 Maintainer: David MartÃnez Moreno <ender@debian.org> Version: 1.12.1-1 Depends: libc6 (>= 2.3.5-1)Description: Tools for doing neat things in NTFS partitions from Linux - udebCurrently this udeb contains only ntfsresize. Package: os-prober-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 68 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.09 Depends: di-utils-mapdevfs, anna (>= 1.16) Provides: os-prober Description: utility to detect other OSes on a set of drives This package is to be used by boot loader installers to detect other OSes available on a system, in a generic format, which it can then adapt to its own configuration format. Package: parport-modules-2.6.16-1-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 116 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29 Depends: kernel-image-2.6.16-1-486-di Provides: parport-modules Description: Parallel port support This package contains parallel port drivers for the Linux kernel. Package: partconf-find-partitions Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 32 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.14Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41), libparted1.6-13 (>= 1.6.24), libparted1.6-udebDescription: debian-installer utility for finding partitions Helper program for finding partitions and detecting their size and existing file system. Package: parted-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 52Maintainer: Parted Maintainer Team <parted-maintainers@lists.alioth.debian.org>Version: 1.6.25.1-3 Depends: libc6 (>= 2.3.6-6), libparted1.6-udeb (>= 1.6.24) Provides: parted Description: The GNU Parted disk partition resizing program GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package is similar to the "big" parted package, but has less cosmetical features resulting in smaller binary. Intended to be used in debian-installer. . . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: partman-auto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 652 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 51 Depends: partman-base, partman-basicfilesystems, partman-ext3 Description: Automatically partition storage devices (partman) Package: partman-auto-lvm Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 116 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 10Depends: partman-base (>= 73), partman-auto (>= 51), partman-lvm, di-utils (>= 1.15), lvm2-udebDescription: Automatically partition storage devices using LVM Package: partman-base Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 776 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 81Depends: libc6 (>= 2.3.5-1), libparted1.6-13 (>= 1.6.24), libparted1.6-udeb, partman-partitioning, partman-target, archdetect, harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15) Provides: made-filesystems, mounted-partitions, partitioned-harddrives, created-fstabDescription: Partition the storage devices (partman) Installer-Menu-Item: 42 Package: partman-basicfilesystems Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 508 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 46 Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14) Provides: partman-filesystem Description: Add to partman support for ext2, linux-swap, fat16 and fat32 Package: partman-basicmethods Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 120 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 30 Provides: partman-method Description: Basic partition usage methods for partman This package provides partman with two methods to use partitions. The first is to format the partition. The second is to keep and use the existing data in the partition as it is. Package: partman-crypto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 740 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 2Depends: partman-base (>= 73), mount-aes-udeb, cdebconf-newt-entropy, loop-aes-modules, libc6 (>= 2.3.6-6), cdebconf-udebDescription: Add to partman support for loop-AES and dm-crypt crypto Package: partman-ext3 Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 200 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 40Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems, di-utils (>= 1.14)Provides: partman-filesystem Description: Add to partman support for ext3 Package: partman-jfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 232 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 16Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils (>= 1.14)Provides: partman-filesystem Description: Add support for jfs to partman Package: partman-lvm Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 160 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 34 Depends: lvmcfg-utils, lvm2-udeb, partman-base (>= 73), di-utils (>= 1.14) Description: Add to partman support for LVM Package: partman-md Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 144 Maintainer: Paul Fleischer <proguy@proguy.dk> Version: 24 Depends: mdadm-udeb, mdcfg-utils, partman-base (>= 73) Description: Add to partman support for MD Package: partman-partitioning Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 308 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 39 Depends: ntfstools-udeb Description: Partitioning operations for partman This udeb provides partman with editing operations for creation of new partitions, deletion of partitions and initialisation of the partition table. Package: partman-reiserfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 204 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 30Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems, di-utils (>= 1.14)Provides: partman-filesystem Description: Add to partman support for reiserfs Package: partman-target Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 256 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 42 Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs Description: Provides partman with ability to prepare /target This udeb allows the user to choose how partitions should be used. Package: partman-xfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 200 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 28Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils (>= 1.14)Provides: partman-filesystem Description: Add to partman support for xfs Package: pcmcia-storage-modules-2.6.16-1-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 52 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29Depends: kernel-image-2.6.16-1-486-di, ide-core-modules-2.6.16-1-486-di, cdrom-core-modules-2.6.16-1-486-di, pcmcia-modules-2.6.16-1-486-diProvides: pcmcia-storage-modules Description: PCMCIA storage drivers This package contains PCMCIA storage drivers for the Linux kernel. Package: pkgsel Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 28 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 0.06 Depends: apt-setup-udeb, di-utils (>= 1.20) Description: Select and install packages Installer-Menu-Item: 70 Package: prebaseconfig Status: install ok unpacked Priority: required Section: debian-installer Installed-Size: 104 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.16 Depends: archdetect, base-installer, created-fstab, bootable-system Description: Finish the installation and reboot finish the installation and reboot Installer-Menu-Item: 78 Package: reiserfs-modules-2.6.16-1-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 276 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29 Depends: kernel-image-2.6.16-1-486-di Provides: reiserfs-modules Description: Reiser filesystem support This package contains the Reiser filesystem module for the Linux kernel. Package: sata-modules-2.6.16-1-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 340 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29 Depends: kernel-image-2.6.16-1-486-di, scsi-core-modules-2.6.16-1-486-di Provides: sata-modules Description: SATA drivers This package contains SATA drivers for the Linux kernel. Package: scsi-common-modules-2.6.16-1-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 704 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29Depends: kernel-image-2.6.16-1-486-di, scsi-core-modules-2.6.16-1-486-di, cdrom-core-modules-2.6.16-1-486-diProvides: scsi-common-modules Description: Very common SCSI drivers This package contains very common SCSI drivers for the Linux kernel. Package: scsi-extra-modules-2.6.16-1-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 1308 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29 Depends: scsi-modules-2.6.16-1-486-di, scsi-core-modules-2.6.16-1-486-di Provides: scsi-extra-modules Description: Uncommon SCSI drivers This package contains uncommon SCSI drivers for the Linux kernel. This includes SCSI RAID drivers, and some of the less common SCSI controllers. Package: scsi-modules-2.6.16-1-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 1112 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29Depends: kernel-image-2.6.16-1-486-di, scsi-core-modules-2.6.16-1-486-di, parport-modules-2.6.16-1-486-di, cdrom-core-modules-2.6.16-1-486-di, firmware-modules-2.6.16-1-486-diProvides: scsi-modules Description: SCSI drivers This package contains SCSI drivers for the Linux kernel. Package: tzsetup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 244 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1:0.9 Depends: localechooser Description: choose timezone Installer-Menu-Item: 62 Package: usb-storage-modules-2.6.16-1-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 132 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29Depends: ide-core-modules-2.6.16-1-486-di, scsi-core-modules-2.6.16-1-486-di, usb-modules-2.6.16-1-486-diProvides: usb-storage-modules Description: USB storage support This package contains the USB storage driver for the Linux kernel. Package: user-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 236 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.1 Depends: cdebconf-udeb Description: Set up users and passwords Installer-Menu-Item: 63 Package: xfs-modules-2.6.16-1-486-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 580 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29 Depends: kernel-image-2.6.16-1-486-di Provides: xfs-modules Description: XFS filesystem support This package contains the XFS filesystem module for the Linux kernel. Package: xfsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 268 Maintainer: Nathan Scott <nathans@debian.org> Version: 2.7.16-1 Depends: libc6 (>= 2.3.5-1), libuuid1 Description: A stripped-down version of xfsprogs, for debian-installer This package is an xfsprogs package built for reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway, it should fail to install. Package: ntfs-modules-2.6.16-1-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 256 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29 Depends: kernel-image-2.6.16-1-486-di Provides: ntfs-modules Description: NTFS filesystem support This package contains the NTFS file system module for the Linux kernel. Package: qnx4-modules-2.6.16-1-486-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 48 Maintainer: Debian Install System Team <debian-boot@lists.debian.org> Version: 1.29 Depends: kernel-image-2.6.16-1-486-di Provides: qnx4-modules Description: QNX4 filesystem support This package contains the QNX4 filesystem module for the Linux kernel. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686-smp Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) installation-report depends on no packages. Versions of packages installation-report recommends:ii reportbug 3.20 reports bugs in the Debian distrib-- no debconf information
--- End Message ---
--- Begin Message ---
- To: François Gaudé <francois.gaude@free.fr>, 368210-done@bugs.debian.org
- Subject: Re: Bug#368210: installation-report: No problem : installation suceeded.
- From: Frans Pop <elendil@planet.nl>
- Date: Sat, 20 May 2006 17:30:00 +0200
- Message-id: <200605201730.00952.elendil@planet.nl>
- In-reply-to: <[🔎] 446F277D.4090008@free.fr>
- References: <[🔎] 446F277D.4090008@free.fr>
On Saturday 20 May 2006 16:28, François Gaudé wrote: > Comments/Problems: > At initial install, the CD/DVD reader is detected but not activated : That is a known issue. For CD-based installs we have a workaround documented in the errata and the wiki [1]. This should be fixed before the release of Etch as we expect the SATA/ATAPI support to be enabled by default in the kernel by default before then. Thank you for submitting your installation report. I'm closing it as the install was successful. Cheers, FJP [1] http://wiki.debian.org/DebianInstaller/SataAtapiHowtoAttachment: pgp_VgXGNamUP.pgp
Description: PGP signature
--- End Message ---