Bug#368210: installation-report: No problem : installation suceeded.
Subject: installation-report: No problem : installation suceeded.
Package: installation-reports
Version: 2.14
Severity: wishlist
-- Package-specific info:
Boot method: network
Image version: netboot.tar.gz 02 May 2006
Date: 05/06/2006 10:00
Machine: Dell Inspiron 6400 E1505
Partitions: <df -Tl will do; the raw partition table is preferred>
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/sda12 ext3 6854808 2602904 3903696 41% /
tmpfs tmpfs 513624 0 513624 0% /dev/shm
/dev/sda9 ext3 9614144 281404 8844368 4% /home
/dev/sda11 ext3 4807084 131408 4626840 3% /tmp
/dev/sda2 ntfs 9767516 5660756 4106760 58% /mnt/XP
/dev/sda5 ntfs 34178284 3273412 30904872 10% /mnt/users
/dev/sda6 vfat 7800368 322704 7477664 5% /mnt/echange
tmpfs tmpfs 513624 140 513484 1% /dev
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [E]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [ ]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Installed system ok: [O]
Comments/Problems:
Installation boot by network : the package netboot.tar.gz was installed on
a PC running under Debian Sarge, providing dhcpd and tftpd-hpa services.
Partitions were created before the install (using RIP14, to resize NTFS
filesystem, create new FAT and Linux partitions and to keep Dell rescue
partitions working).
X works with "vesa" driver ; should be "i810" but i810 does not yet support
the Intel 945GM chipset of this Dell Inspiron 6400 E1505 ; using
"915resolution"
package gives the native screen 1280x800 resolution.
Grub bootloader is installed in the extended partition (not in the MBR),
so as to keep the Windows loader "ntldr" as the primary bootloader.
At initial install, the CD/DVD reader is detected but not activated :
May 6 10:50:00 vautour kernel: ata2: SATA max UDMA/133 cmd 0x170 ctl
0x376 bmdma 0xBFA8 irq 15
May 6 10:50:00 vautour kernel: ata2: dev 0 cfg 49:0b00 82:0210 83:1000
84:0000 85:0000 86:0000 87:0000 88:0407
May 6 10:50:00 vautour kernel: ata2: dev 0 ATAPI, max UDMA/33
May 6 10:50:00 vautour kernel: ata2: dev 0 configured for UDMA/33
May 6 10:50:00 vautour kernel: scsi1 : ata_piix
May 6 10:50:00 vautour kernel: ata2(0): WARNING: ATAPI is disabled,
device ignored.
Adding the line : libata atapi_enabled=1
in /etc/mkinitramfs/modules and running update-initramfs allows correct
operation
of the CD/DVD reader/writer.
The features of initramfs update-initramfs are VERY USEFUL !
Wireless Wifi : chip Intel 3945G not detected.
Bluetooth : not tested.
Sound : OK.
At install time : one processor installed (processor is actually a dual
core).
To use dual core processor with linux-image-2.6.15-1-686-smp : need to
de-activate the BIOS SpeedStep option,
else the PC freezes when under load.
Thanks to the debian-installer team for this good job !
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report.
Once you have filled out this report, mail it to submit@bugs.debian.org.
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="3.1 (installer build 20060502)"
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux vautour 2.6.16-1-486 #2 Tue Apr 25 20:33:31 UTC 2006
i686 unknown
lspci -v -t: -[00]-+-00.0 Intel Corporation Mobile Memory Controller Hub
lspci -v -t: +-02.0 Intel Corporation Mobile Integrated Graphics
Controller
lspci -v -t: +-02.1 Intel Corporation Mobile Integrated Graphics
Controller
lspci -v -t: +-1b.0 Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller
lspci -v -t: +-1c.0-[0b]----00.0 Intel Corporation: Unknown
device 4222
lspci -v -t: +-1c.3-[0c-0d]--
lspci -v -t: +-1d.0 Intel Corporation 82801G (ICH7 Family) USB
UHCI #1
lspci -v -t: +-1d.1 Intel Corporation 82801G (ICH7 Family) USB
UHCI #2
lspci -v -t: +-1d.2 Intel Corporation 82801G (ICH7 Family) USB
UHCI #3
lspci -v -t: +-1d.3 Intel Corporation 82801G (ICH7 Family) USB
UHCI #4
lspci -v -t: +-1d.7 Intel Corporation 82801G (ICH7 Family) USB2
EHCI Controller
lspci -v -t: +-1e.0-[03]--+-00.0 Broadcom Corporation BCM4401-B0
100Base-TX
lspci -v -t: | +-01.0 Ricoh Co Ltd: Unknown device 0832
lspci -v -t: | +-01.1 Ricoh Co Ltd R5C822
SD/SDIO/MMC/MS/MSPro Host Adapter
lspci -v -t: | +-01.2 Ricoh Co Ltd: Unknown device 0843
lspci -v -t: | +-01.3 Ricoh Co Ltd R5C592 Memory Stick
Bus Host Adapter
lspci -v -t: | \-01.4 Ricoh Co Ltd xD-Picture Card
Controller
lspci -v -t: +-1f.0 Intel Corporation 82801GBM (ICH7-M) LPC
Interface Bridge
lspci -v -t: +-1f.2 Intel Corporation 82801GBM/GHM (ICH7 Family)
Serial ATA Storage Controllers cc=IDE
lspci -v -t: \-1f.3 Intel Corporation 82801G (ICH7 Family) SMBus
Controller
lspci -n: 0000:00:00.0 0600: 8086:27a0 (rev 03)
lspci -n: 0000:00:02.0 0300: 8086:27a2 (rev 03)
lspci -n: 0000:00:02.1 0380: 8086:27a6 (rev 03)
lspci -n: 0000:00:1b.0 0403: 8086:27d8 (rev 01)
lspci -n: 0000:00:1c.0 0604: 8086:27d0 (rev 01)
lspci -n: 0000:00:1c.3 0604: 8086:27d6 (rev 01)
lspci -n: 0000:00:1d.0 0c03: 8086:27c8 (rev 01)
lspci -n: 0000:00:1d.1 0c03: 8086:27c9 (rev 01)
lspci -n: 0000:00:1d.2 0c03: 8086:27ca (rev 01)
lspci -n: 0000:00:1d.3 0c03: 8086:27cb (rev 01)
lspci -n: 0000:00:1d.7 0c03: 8086:27cc (rev 01)
lspci -n: 0000:00:1e.0 0604: 8086:2448 (rev e1)
lspci -n: 0000:00:1f.0 0601: 8086:27b9 (rev 01)
lspci -n: 0000:00:1f.2 0101: 8086:27c4 (rev 01)
lspci -n: 0000:00:1f.3 0c05: 8086:27da (rev 01)
lspci -n: 0000:03:00.0 0200: 14e4:170c (rev 02)
lspci -n: 0000:03:01.0 0c00: 1180:0832
lspci -n: 0000:03:01.1 0805: 1180:0822 (rev 19)
lspci -n: 0000:03:01.2 0880: 1180:0843 (rev 01)
lspci -n: 0000:03:01.3 0880: 1180:0592 (rev 0a)
lspci -n: 0000:03:01.4 0880: 1180:0852 (rev 05)
lspci -n: 0000:0b:00.0 0280: 8086:4222 (rev 02)
lspci -v: 0000:00:00.0 Host bridge: Intel Corporation Mobile Memory
Controller Hub (rev 03)
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Capabilities: [e0] #09 [5109]
lspci -v:
lspci -v: 0000:00:02.0 VGA compatible controller: Intel Corporation
Mobile Integrated Graphics Controller (rev 03)
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: bus master, fast devsel, latency 0, IRQ 11
lspci -v: Memory at dff00000 (32-bit, non-prefetchable) [size=512K]
lspci -v: I/O ports at eff8 [size=8]
lspci -v: Memory at c0000000 (32-bit, prefetchable) [size=256M]
lspci -v: Memory at dfec0000 (32-bit, non-prefetchable) [size=256K]
lspci -v: Capabilities: [90] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable-
lspci -v: Capabilities: [d0] Power Management version 2
lspci -v:
lspci -v: 0000:00:02.1 Display controller: Intel Corporation Mobile
Integrated Graphics Controller (rev 03)
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Memory at dff80000 (32-bit, non-prefetchable) [size=512K]
lspci -v: Capabilities: [d0] Power Management version 2
lspci -v:
lspci -v: 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 01)
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: bus master, fast devsel, latency 0, IRQ 10
lspci -v: Memory at dfebc000 (64-bit, non-prefetchable) [size=16K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v: Capabilities: [60] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
lspci -v: Capabilities: [70] #10 [0091]
lspci -v:
lspci -v: 0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7
Family) PCI Express Port 1 (rev 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
lspci -v: Memory behind bridge: dfd00000-dfdfffff
lspci -v: Capabilities: [40] #10 [0141]
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable+
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v:
lspci -v: 0000:00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7
Family) PCI Express Port 4 (rev 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0
lspci -v: I/O behind bridge: 0000d000-0000dfff
lspci -v: Memory behind bridge: dfa00000-dfcfffff
lspci -v: Prefetchable memory behind bridge:
00000000d0000000-00000000d0100000
lspci -v: Capabilities: [40] #10 [0141]
lspci -v: Capabilities: [80] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable+
lspci -v: Capabilities: [90] #0d [0000]
lspci -v: Capabilities: [a0] Power Management version 2
lspci -v:
lspci -v: 0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7
Family) USB UHCI #1 (rev 01)
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 209
lspci -v: I/O ports at bf80 [size=32]
lspci -v:
lspci -v: 0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7
Family) USB UHCI #2 (rev 01)
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 217
lspci -v: I/O ports at bf60 [size=32]
lspci -v:
lspci -v: 0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7
Family) USB UHCI #3 (rev 01)
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 225
lspci -v: I/O ports at bf40 [size=32]
lspci -v:
lspci -v: 0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7
Family) USB UHCI #4 (rev 01)
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 233
lspci -v: I/O ports at bf20 [size=32]
lspci -v:
lspci -v: 0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7
Family) USB2 EHCI Controller (rev 01) (prog-if 20)
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 209
lspci -v: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
lspci -v: Capabilities: [50] Power Management version 2
lspci -v: Capabilities: [58] #0a [20a0]
lspci -v:
lspci -v: 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI
Bridge (rev e1) (prog-if 01)
lspci -v: Flags: bus master, fast devsel, latency 0
lspci -v: Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
lspci -v: Memory behind bridge: df900000-df9fffff
lspci -v: Capabilities: [50] #0d [0000]
lspci -v:
lspci -v: 0000:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M)
LPC Interface Bridge (rev 01)
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: bus master, medium devsel, latency 0
lspci -v: Capabilities: [e0] #09 [100c]
lspci -v:
lspci -v: 0000:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM
(ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01) (prog-if 80
[Master])
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 50
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at <ignored>
lspci -v: I/O ports at bfa0 [size=16]
lspci -v: Capabilities: [70] Power Management version 2
lspci -v:
lspci -v: 0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family)
SMBus Controller (rev 01)
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: medium devsel, IRQ 4
lspci -v: I/O ports at 10c0 [size=32]
lspci -v:
lspci -v: 0000:03:00.0 Ethernet controller: Broadcom Corporation
BCM4401-B0 100Base-TX (rev 02)
lspci -v: Subsystem: Dell: Unknown device 01af
lspci -v: Flags: bus master, fast devsel, latency 64, IRQ 50
lspci -v: Memory at df9fe000 (32-bit, non-prefetchable) [size=8K]
lspci -v: Capabilities: [40] Power Management version 2
lspci -v:
lspci -v: 0000:03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd: Unknown
device 0832 (prog-if 10)
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: bus master, medium devsel, latency 64, IRQ 177
lspci -v: Memory at df9fd800 (32-bit, non-prefetchable) [size=2K]
lspci -v: Capabilities: [dc] Power Management version 2
lspci -v:
lspci -v: 0000:03:01.1 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter (rev 19) (prog-if 01)
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: bus master, medium devsel, latency 64, IRQ 11
lspci -v: Memory at df9fd400 (32-bit, non-prefetchable) [size=256]
lspci -v: Capabilities: [80] Power Management version 2
lspci -v:
lspci -v: 0000:03:01.2 System peripheral: Ricoh Co Ltd: Unknown device
0843 (rev 01)
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: bus master, medium devsel, latency 0, IRQ 11
lspci -v: Memory at df9fd500 (32-bit, non-prefetchable) [size=256]
lspci -v: Capabilities: [80] Power Management version 2
lspci -v:
lspci -v: 0000:03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory
Stick Bus Host Adapter (rev 0a)
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: medium devsel, IRQ 11
lspci -v: Memory at df9fd600 (32-bit, non-prefetchable) [size=256]
lspci -v: Capabilities: [80] Power Management version 2
lspci -v:
lspci -v: 0000:03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card
Controller (rev 05)
lspci -v: Subsystem: Dell: Unknown device 01bd
lspci -v: Flags: medium devsel, IRQ 11
lspci -v: Memory at df9fd700 (32-bit, non-prefetchable) [size=256]
lspci -v: Capabilities: [80] Power Management version 2
lspci -v:
lspci -v: 0000:0b:00.0 Network controller: Intel Corporation: Unknown
device 4222 (rev 02)
lspci -v: Subsystem: Intel Corporation: Unknown device 1021
lspci -v: Flags: bus master, fast devsel, latency 0, IRQ 4
lspci -v: Memory at dfdff000 (32-bit, non-prefetchable) [size=4K]
lspci -v: Capabilities: [c8] Power Management version 2
lspci -v: Capabilities: [d0] Message Signalled Interrupts: 64bit+
Queue=0/0 Enable-
lspci -v: Capabilities: [e0] #10 [0011]
lspci -v:
lspci -x: 0000:00:00.0 Host bridge: Intel Corporation Mobile Memory
Controller Hub (rev 03)
lspci -x: 00: 86 80 a0 27 06 00 90 30 03 00 00 06 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:02.0 VGA compatible controller: Intel Corporation
Mobile Integrated Graphics Controller (rev 03)
lspci -x: 00: 86 80 a2 27 07 00 90 00 03 00 00 03 00 00 80 00
lspci -x: 10: 00 00 f0 df f9 ef 00 00 08 00 00 c0 00 00 ec df
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 90 00 00 00 00 00 00 00 0b 01 00 00
lspci -x:
lspci -x: 0000:00:02.1 Display controller: Intel Corporation Mobile
Integrated Graphics Controller (rev 03)
lspci -x: 00: 86 80 a6 27 07 00 90 00 03 00 80 03 00 00 80 00
lspci -x: 10: 00 00 f8 df 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 01)
lspci -x: 00: 86 80 d8 27 06 01 10 00 01 00 03 04 10 00 00 00
lspci -x: 10: 04 c0 eb df 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 0a 01 00 00
lspci -x:
lspci -x: 0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7
Family) PCI Express Port 1 (rev 01)
lspci -x: 00: 86 80 d0 27 07 04 10 00 01 00 04 06 10 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 0b 0b 00 f0 00 00 20
lspci -x: 20: d0 df d0 df f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 01 02 00
lspci -x:
lspci -x: 0000:00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7
Family) PCI Express Port 4 (rev 01)
lspci -x: 00: 86 80 d6 27 07 04 10 00 01 00 04 06 10 00 81 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 0c 0d 00 d0 d0 00 00
lspci -x: 20: a0 df c0 df 01 d0 11 d0 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 04 02 00
lspci -x:
lspci -x: 0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7
Family) USB UHCI #1 (rev 01)
lspci -x: 00: 86 80 c8 27 05 00 80 02 01 00 03 0c 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 81 bf 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00
lspci -x:
lspci -x: 0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7
Family) USB UHCI #2 (rev 01)
lspci -x: 00: 86 80 c9 27 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 61 bf 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 00
lspci -x:
lspci -x: 0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7
Family) USB UHCI #3 (rev 01)
lspci -x: 00: 86 80 ca 27 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 41 bf 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 07 03 00 00
lspci -x:
lspci -x: 0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7
Family) USB UHCI #4 (rev 01)
lspci -x: 00: 86 80 cb 27 05 00 80 02 01 00 03 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 21 bf 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 05 04 00 00
lspci -x:
lspci -x: 0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7
Family) USB2 EHCI Controller (rev 01)
lspci -x: 00: 86 80 cc 27 06 01 90 02 01 20 03 0c 00 00 00 00
lspci -x: 10: 00 00 a8 ff 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 09 01 00 00
lspci -x:
lspci -x: 0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI
Bridge (rev e1)
lspci -x: 00: 86 80 48 24 07 01 10 08 e1 01 04 06 00 00 01 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 03 03 20 f0 00 80 32
lspci -x: 20: 90 df 90 df f1 ff 01 00 00 00 00 00 00 00 00 00
lspci -x: 30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 02 00
lspci -x:
lspci -x: 0000:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M)
LPC Interface Bridge (rev 01)
lspci -x: 00: 86 80 b9 27 07 01 10 02 01 00 01 06 00 00 80 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00
lspci -x:
lspci -x: 0000:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM
(ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01)
lspci -x: 00: 86 80 c4 27 05 00 b0 02 01 80 01 01 00 00 00 00
lspci -x: 10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00
lspci -x: 20: a1 bf 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 70 00 00 00 00 00 00 00 04 02 00 00
lspci -x:
lspci -x: 0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family)
SMBus Controller (rev 01)
lspci -x: 00: 86 80 da 27 01 01 80 02 01 00 05 0c 00 00 00 00
lspci -x: 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: c1 10 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 00 00 00 00 00 00 00 00 04 02 00 00
lspci -x:
lspci -x: 0000:03:00.0 Ethernet controller: Broadcom Corporation
BCM4401-B0 100Base-TX (rev 02)
lspci -x: 00: e4 14 0c 17 06 01 10 08 02 00 00 02 00 40 00 00
lspci -x: 10: 00 e0 9f df 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 af 01
lspci -x: 30: 00 00 00 00 40 00 00 00 00 00 00 00 04 01 00 00
lspci -x:
lspci -x: 0000:03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd: Unknown
device 0832
lspci -x: 00: 80 11 32 08 06 01 10 02 00 10 00 0c 00 40 80 00
lspci -x: 10: 00 d8 9f df 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 dc 00 00 00 00 00 00 00 03 01 02 04
lspci -x:
lspci -x: 0000:03:01.1 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter (rev 19)
lspci -x: 00: 80 11 22 08 06 01 10 02 19 01 05 08 00 40 80 00
lspci -x: 10: 00 d4 9f df 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 02 00 00
lspci -x:
lspci -x: 0000:03:01.2 System peripheral: Ricoh Co Ltd: Unknown device
0843 (rev 01)
lspci -x: 00: 80 11 43 08 06 01 10 02 01 00 80 08 00 00 80 00
lspci -x: 10: 00 d5 9f df 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 02 00 00
lspci -x:
lspci -x: 0000:03:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory
Stick Bus Host Adapter (rev 0a)
lspci -x: 00: 80 11 92 05 02 01 10 02 0a 00 80 08 00 00 80 00
lspci -x: 10: 00 d6 9f df 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 02 00 00
lspci -x:
lspci -x: 0000:03:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card
Controller (rev 05)
lspci -x: 00: 80 11 52 08 02 01 10 02 05 00 80 08 00 00 80 00
lspci -x: 10: 00 d7 9f df 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 28 10 bd 01
lspci -x: 30: 00 00 00 00 80 00 00 00 00 00 00 00 0b 02 00 00
lspci -x:
lspci -x: 0000:0b:00.0 Network controller: Intel Corporation: Unknown
device 4222 (rev 02)
lspci -x: 00: 86 80 22 42 06 01 10 00 02 00 80 02 10 00 00 00
lspci -x: 10: 00 f0 df df 00 00 00 00 00 00 00 00 00 00 00 00
lspci -x: 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 21 10
lspci -x: 30: 00 00 00 00 c8 00 00 00 00 00 00 00 04 01 00 00
lspci -x:
lsmod: Module Size Used by
lsmod: nls_cp437 5888 0
lsmod: nls_iso8859_1 4224 6
lsmod: qnx4 10612 0
lsmod: ntfs 189580 0
lsmod: xfs 483476 0
lsmod: exportfs 5248 1 xfs
lsmod: reiserfs 218352 0
lsmod: jfs 158556 0
lsmod: ext3 115976 3
lsmod: jbd 46996 1 ext3
lsmod: vfat 11520 0
lsmod: fat 46876 1 vfat
lsmod: sr_mod 16036 0
lsmod: isofs 32192 0
lsmod: ide_cd 35488 0
lsmod: cdrom 32176 2 sr_mod,ide_cd
lsmod: ide_disk 14976 0
lsmod: ide_generic 1408 0 [permanent]
lsmod: aec62xx 6784 0 [permanent]
lsmod: alim15x3 11024 0 [permanent]
lsmod: amd74xx 12956 0 [permanent]
lsmod: atiixp 5392 0 [permanent]
lsmod: cmd64x 10012 0 [permanent]
lsmod: cs5520 4608 0 [permanent]
lsmod: cs5530 4864 0 [permanent]
lsmod: cs5535 4224 0 [permanent]
lsmod: cy82c693 4356 0 [permanent]
lsmod: hpt34x 4992 0 [permanent]
lsmod: it821x 7812 0 [permanent]
lsmod: ns87415 4268 0 [permanent]
lsmod: opti621 4100 0 [permanent]
lsmod: pdc202xx_new 8064 0 [permanent]
lsmod: pdc202xx_old 9600 0 [permanent]
lsmod: piix 9092 0 [permanent]
lsmod: rz1000 2688 0 [permanent]
lsmod: sc1200 6656 0 [permanent]
lsmod: serverworks 8328 0 [permanent]
lsmod: siimage 11008 0 [permanent]
lsmod: sis5513 12300 0 [permanent]
lsmod: slc90e66 5120 0 [permanent]
lsmod: triflex 3712 0 [permanent]
lsmod: trm290 4100 0 [permanent]
lsmod: via82cxxx 8196 0 [permanent]
lsmod: usb_storage 69696 0
lsmod: sd_mod 16528 5
lsmod: generic 4356 0 [permanent]
lsmod: ide_core 111280 30
ide_cd,ide_disk,ide_generic,aec62xx,alim15x3,amd74xx,atiixp,cmd64x,cs5520,cs5530,cs5535,cy82c693,hpt34x,it821x,ns87415,opti621,pdc202xx_new,pdc202xx_old,piix,rz1000,sc1200,serverworks,siimage,sis5513,slc90e66,triflex,trm290,via82cxxx,usb_storage,generic
lsmod: ata_piix 9988 4
lsmod: libata 52752 1 ata_piix
lsmod: rsrc_nonstatic 12160 0
lsmod: pcmcia_core 37392 1 rsrc_nonstatic
lsmod: sbp2 19460 0
lsmod: scsi_mod 122444 5 sr_mod,usb_storage,sd_mod,libata,sbp2
lsmod: eth1394 18180 0
lsmod: vga16fb 11528 2
lsmod: vgastate 7680 1 vga16fb
lsmod: usbhid 32352 0
lsmod: thermal 13192 0
lsmod: processor 21696 1 thermal
lsmod: fan 4740 0
lsmod: ohci1394 29488 0
lsmod: ieee1394 85816 3 sbp2,eth1394,ohci1394
lsmod: b44 22156 0
lsmod: mii 5248 1 b44
lsmod: ehci_hcd 27144 0
lsmod: uhci_hcd 27152 0
lsmod: usbcore 111008 5 usb_storage,usbhid,ehci_hcd,uhci_hcd
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 513756 460 513296 0% /dev
df: tmpfs 513756 460 513296 0% /dev
df: tmpfs 513756 460 513296 0% /.dev
df: /dev/scsi/host0/bus0/target0/lun0/part12 6854808 2158448
4348152 33% /target
df: /dev/scsi/host0/bus0/target0/lun0/part9 9614144 131276
8994496 1% /target/home
df: /dev/scsi/host0/bus0/target0/lun0/part11 4807084 131268
4626980 3% /target/tmp
free: total used free shared
buffers
free: Mem: 1027516 1005388 22128 0
54360
free: Swap: 64248 456 63792
free: Total: 1091764 1005844 85920
cardctl status: /usr/bin/report-hw: 32: cardctl: not found
cardctl ident: /usr/bin/report-hw: 33: cardctl: not found
/proc/cpuinfo: processor : 0
/proc/cpuinfo: vendor_id : GenuineIntel
/proc/cpuinfo: cpu family : 6
/proc/cpuinfo: model : 14
/proc/cpuinfo: model name : Genuine Intel(R) CPU T2300 @
1.66GHz
/proc/cpuinfo: stepping : 8
/proc/cpuinfo: cpu MHz : 1663.060
/proc/cpuinfo: cache size : 2048 KB
/proc/cpuinfo: fdiv_bug : no
/proc/cpuinfo: hlt_bug : no
/proc/cpuinfo: f00f_bug : no
/proc/cpuinfo: coma_bug : no
/proc/cpuinfo: fpu : yes
/proc/cpuinfo: fpu_exception : yes
/proc/cpuinfo: cpuid level : 10
/proc/cpuinfo: wp : yes
/proc/cpuinfo: flags : fpu vme de pse tsc msr pae mce cx8 apic
sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm
pbe nx constant_tsc pni monitor vmx est tm2 xtpr
/proc/cpuinfo: bogomips : 3331.53
/proc/cpuinfo:
/proc/ioports: 0000-001f : dma1
/proc/ioports: 0020-0021 : pic1
/proc/ioports: 0040-0043 : timer0
/proc/ioports: 0050-0053 : timer1
/proc/ioports: 0060-006f : keyboard
/proc/ioports: 0080-008f : dma page reg
/proc/ioports: 00a0-00a1 : pic2
/proc/ioports: 00c0-00df : dma2
/proc/ioports: 00f0-00ff : fpu
/proc/ioports: 0170-0177 : libata
/proc/ioports: 01f0-01f7 : libata
/proc/ioports: 03c0-03df : vga+
/proc/ioports: 04d0-04d1 : pnp 00:02
/proc/ioports: 0910-091f : pnp 00:08
/proc/ioports: 0920-092f : pnp 00:08
/proc/ioports: 0940-097f : pnp 00:08
/proc/ioports: 0c80-0cff : pnp 00:08
/proc/ioports: 0cb0-0cbf : pnp 00:08
/proc/ioports: 1000-1005 : motherboard
/proc/ioports: 1000-1003 : PM1a_EVT_BLK
/proc/ioports: 1004-1005 : PM1a_CNT_BLK
/proc/ioports: 1006-1007 : motherboard
/proc/ioports: 1006-1007 : pnp 00:03
/proc/ioports: 1008-100f : motherboard
/proc/ioports: 1008-100b : PM_TMR
/proc/ioports: 1010-102f : motherboard
/proc/ioports: 1010-1015 : ACPI CPU throttle
/proc/ioports: 1020-1020 : PM2_CNT_BLK
/proc/ioports: 1028-102f : GPE0_BLK
/proc/ioports: 1060-107f : motherboard
/proc/ioports: 1060-107f : pnp 00:03
/proc/ioports: 1080-10bf : motherboard
/proc/ioports: 1080-10bf : pnp 00:03
/proc/ioports: 10c0-10df : 0000:00:1f.3
/proc/ioports: 10c0-10df : motherboard
/proc/ioports: 10c0-10df : pnp 00:03
/proc/ioports: bf20-bf3f : 0000:00:1d.3
/proc/ioports: bf20-bf3f : uhci_hcd
/proc/ioports: bf40-bf5f : 0000:00:1d.2
/proc/ioports: bf40-bf5f : uhci_hcd
/proc/ioports: bf60-bf7f : 0000:00:1d.1
/proc/ioports: bf60-bf7f : uhci_hcd
/proc/ioports: bf80-bf9f : 0000:00:1d.0
/proc/ioports: bf80-bf9f : uhci_hcd
/proc/ioports: bfa0-bfaf : 0000:00:1f.2
/proc/ioports: bfa0-bfaf : libata
/proc/ioports: d000-dfff : PCI Bus #0c
/proc/ioports: eff8-efff : 0000:00:02.0
/proc/ioports: f400-f4fe : motherboard
/proc/ioports: f400-f4fe : pnp 00:03
/proc/iomem: 00000000-0009efff : System RAM
/proc/iomem: 00000000-00000000 : Crash kernel
/proc/iomem: 0009f000-0009ffff : reserved
/proc/iomem: 000a0000-000bffff : Video RAM area
/proc/iomem: 000c0000-000c7fff : Video ROM
/proc/iomem: 000ce800-000cffff : Adapter ROM
/proc/iomem: 000d0000-000d0fff : Adapter ROM
/proc/iomem: 000d1000-000d3fff : Adapter ROM
/proc/iomem: 000f0000-000fffff : System ROM
/proc/iomem: 00100000-3f6d33ff : System RAM
/proc/iomem: 00100000-00273192 : Kernel code
/proc/iomem: 00273193-00301c23 : Kernel data
/proc/iomem: 3f6d3400-3fffffff : reserved
/proc/iomem: c0000000-cfffffff : 0000:00:02.0
/proc/iomem: d0000000-d01fffff : PCI Bus #0c
/proc/iomem: df900000-df9fffff : PCI Bus #03
/proc/iomem: df9fd400-df9fd4ff : 0000:03:01.1
/proc/iomem: df9fd500-df9fd5ff : 0000:03:01.2
/proc/iomem: df9fd600-df9fd6ff : 0000:03:01.3
/proc/iomem: df9fd700-df9fd7ff : 0000:03:01.4
/proc/iomem: df9fd800-df9fdfff : 0000:03:01.0
/proc/iomem: df9fd800-df9fdfff : ohci1394
/proc/iomem: df9fe000-df9fffff : 0000:03:00.0
/proc/iomem: df9fe000-df9fffff : b44
/proc/iomem: dfa00000-dfcfffff : PCI Bus #0c
/proc/iomem: dfd00000-dfdfffff : PCI Bus #0b
/proc/iomem: dfdff000-dfdfffff : 0000:0b:00.0
/proc/iomem: dfebc000-dfebffff : 0000:00:1b.0
/proc/iomem: dfec0000-dfefffff : 0000:00:02.0
/proc/iomem: dff00000-dff7ffff : 0000:00:02.0
/proc/iomem: dff80000-dfffffff : 0000:00:02.1
/proc/iomem: e0000000-f0006fff : reserved
/proc/iomem: f0008000-f000bfff : reserved
/proc/iomem: fec00000-fec0ffff : reserved
/proc/iomem: fed20000-fed9ffff : reserved
/proc/iomem: fee00000-fee0ffff : reserved
/proc/iomem: ffa80000-ffa803ff : 0000:00:1d.7
/proc/iomem: ffa80000-ffa803ff : ehci_hcd
/proc/iomem: ffb00000-ffffffff : reserved
/proc/interrupts: CPU0
/proc/interrupts: 0: 2485557 IO-APIC-edge timer
/proc/interrupts: 1: 1618 IO-APIC-edge i8042
/proc/interrupts: 9: 2 IO-APIC-level acpi
/proc/interrupts: 14: 85908 IO-APIC-edge libata
/proc/interrupts: 15: 2 IO-APIC-edge libata
/proc/interrupts: 50: 557618 IO-APIC-level eth0
/proc/interrupts: 177: 2 IO-APIC-level ohci1394
/proc/interrupts: 209: 2 IO-APIC-level uhci_hcd:usb1,
ehci_hcd:usb5
/proc/interrupts: 217: 0 IO-APIC-level uhci_hcd:usb2
/proc/interrupts: 225: 31 IO-APIC-level uhci_hcd:usb3
/proc/interrupts: 233: 0 IO-APIC-level uhci_hcd:usb4
/proc/interrupts: NMI: 0
/proc/interrupts: LOC: 1084167
/proc/interrupts: ERR: 0
/proc/interrupts: MIS: 0
/proc/meminfo: MemTotal: 1027516 kB
/proc/meminfo: MemFree: 22096 kB
/proc/meminfo: Buffers: 54360 kB
/proc/meminfo: Cached: 872900 kB
/proc/meminfo: SwapCached: 0 kB
/proc/meminfo: Active: 404544 kB
/proc/meminfo: Inactive: 537124 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 1027516 kB
/proc/meminfo: LowFree: 22096 kB
/proc/meminfo: SwapTotal: 64248 kB
/proc/meminfo: SwapFree: 63792 kB
/proc/meminfo: Dirty: 3976 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: Mapped: 16060 kB
/proc/meminfo: Slab: 53896 kB
/proc/meminfo: CommitLimit: 578004 kB
/proc/meminfo: Committed_AS: 22792 kB
/proc/meminfo: PageTables: 216 kB
/proc/meminfo: VmallocTotal: 261840 kB
/proc/meminfo: VmallocUsed: 8300 kB
/proc/meminfo: VmallocChunk: 252636 kB
/proc/bus/input/devices: I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
/proc/bus/input/devices: N: Name="AT Translated Set 2 keyboard"
/proc/bus/input/devices: P: Phys=isa0060/serio0/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd
/proc/bus/input/devices: B: EV=120013
/proc/bus/input/devices: B: KEY=4 2000000 3802078 f840d001 f2ffffdf
ffefffff ffffffff fffffffe
/proc/bus/input/devices: B: MSC=10
/proc/bus/input/devices: B: LED=7
/proc/bus/input/devices:
/proc/bus/input/devices: I: Bus=0003 Vendor=046d Product=c016 Version=0340
/proc/bus/input/devices: N: Name="Logitech Optical USB Mouse"
/proc/bus/input/devices: P: Phys=usb-0000:00:1d.2-1/input0
/proc/bus/input/devices: S: Sysfs=/class/input/input1
/proc/bus/input/devices: H: Handlers=
/proc/bus/input/devices: B: EV=7
/proc/bus/input/devices: B: KEY=70000 0 0 0 0 0 0 0 0
/proc/bus/input/devices: B: REL=103
/proc/bus/input/devices:
dmidecode: /usr/bin/report-hw: 41: dmidecode: not found
==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok unpacked
Version: 1.15
Depends: di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: localechooser
Status: install ok installed
Version: 1.13
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: nic-extra-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.29
Provides: nic-extra-modules
Depends: kernel-image-2.6.16-1-486-di,
nic-shared-modules-2.6.16-1-486-di, firmware-modules-2.6.16-1-486-di,
crc-modules-2.6.16-1-486-di
Description: Rare NIC drivers
Package: nic-shared-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.29
Provides: nic-shared-modules
Depends: kernel-image-2.6.16-1-486-di
Description: Shared NIC drivers
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6-7
Description: GNU C Library: NSS helper for DNS - udeb
Package: download-installer
Status: install ok installed
Version: 1.10
Depends: net-retriever, anna (>= 1.07)
Description: Download installer components
Installer-Menu-Item: 23
Package: lowmemcheck
Status: install ok unpacked
Version: 1.17
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: main-menu
Status: install ok unpacked
Version: 1.12
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.41), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.27
Depends: cdebconf-udeb (>= 0.73), di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41)
Description: Miscellaneous utilities for the debian installer
Package: scsi-core-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.29
Provides: scsi-core-modules
Depends: kernel-image-2.6.16-1-486-di
Description: Core SCSI subsystem
Package: choose-mirror
Status: install ok installed
Version: 1.21
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.41), cdebconf-udeb, configured-network
Description: Choose mirror to install from
Installer-Menu-Item: 23
Package: network-preseed
Status: install ok unpacked
Version: 1.15
Depends: configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.100+b1
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.6-6), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: nic-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.29
Provides: nic-modules
Depends: kernel-image-2.6.16-1-486-di,
nic-shared-modules-2.6.16-1-486-di, firmware-modules-2.6.16-1-486-di,
firewire-core-modules-2.6.16-1-486-di
Description: Common NIC drivers
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.2.2-2
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: rootskel
Status: install ok installed
Version: 1.31
Depends: di-utils (>= 1.24)
Description: Skeleton root filesystem used by debian-installer
Package: udev-udeb
Status: install ok unpacked
Version: 0.091-1
Depends: libc6 (>= 2.3.6-6)
Description: /dev/ and hotplug management daemon
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-3
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: rescue-check
Status: install ok unpacked
Version: 1.3
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 1.3.11-2
Provides: editor
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.1-1)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.100+b1
Provides: debconf-2.0
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41),
libtextwrap1 (>> 0.01-0)
Description: Debian Configuration Management System (C-implementation)
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: nic-pcmcia-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.29
Provides: nic-pcmcia-modules
Depends: kernel-image-2.6.16-1-486-di,
nic-shared-modules-2.6.16-1-486-di, nic-extra-modules-2.6.16-1-486-di,
pcmcia-modules-2.6.16-1-486-di
Description: Common PCMCIA NIC drivers
Package: firewire-core-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.29
Provides: firewire-core-modules
Depends: scsi-core-modules-2.6.16-1-486-di, kernel-image-2.6.16-1-486-di
Description: Core FireWire drivers
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.100+b1
Depends: cdebconf-udeb, libc6 (>= 2.3.6-6)
Description: Plain text frontend for Debian Configuration Management System
Package: kernel-image-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.29
Provides: kernel-image, ext2-modules
Description: Linux kernel binary image for the Debian installer
Package: fb-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.29
Provides: fb-modules
Depends: kernel-image-2.6.16-1-486-di
Description: Frame buffer support
Package: iso-3166-udeb
Status: install ok installed
Version: 0.51-1
Description: provides iso_3166.tab file
Package: floppy-retriever
Status: install ok unpacked
Version: 1.08
Provides: retriever
Depends: mountfloppy
Description: Fetches modules from a floppy
Package: input-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.29
Provides: input-modules
Depends: kernel-image-2.6.16-1-486-di, usb-modules-2.6.16-1-486-di
Description: Input devices support
Package: ethdetect
Status: install ok installed
Version: 1.35
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect,
di-utils (>= 1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 15
Package: pcmcia-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.29
Provides: pcmcia-modules
Depends: kernel-image-2.6.16-1-486-di, firmware-modules-2.6.16-1-486-di
Description: Common PCMCIA drivers
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.01-4
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.15
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: net-retriever
Status: install ok installed
Version: 1.10
Provides: retriever
Depends: choose-mirror, configured-network, di-utils (>= 1.16)
Description: Fetch modules from the Internet
Package: archdetect
Status: install ok installed
Version: 1.35
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41)
Description: Hardware architecture detector
Package: save-logs
Status: install ok unpacked
Version: 2.14
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.27
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.23
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.41), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: libsysfs2-udeb
Status: install ok unpacked
Version: 2.0.0-6
Provides: libsysfs2
Depends: libc6 (>= 2.3.5-1)
Description: interface library to sysfs
Package: pcmciautils-udeb
Status: install ok unpacked
Version: 013-1
Depends: udev-udeb, libc6 (>= 2.3.5-1), libsysfs2-udeb
Description: PCMCIA utilities for Linux 2.6
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.1.11-16
Depends: libc6 (>= 2.3.5-1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 20060421
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.27
Description: Terminfo entries needed by newt/slang in debian installer
Package: floppy-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.29
Provides: floppy-modules
Depends: kernel-image-2.6.16-1-486-di
Description: Floppy driver
Package: hw-detect
Status: install ok installed
Version: 1.35
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75),
di-utils (>= 1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.25
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.41), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.41
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: acpi-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.29
Provides: acpi-modules
Depends: kernel-image-2.6.16-1-486-di
Description: ACPI support modules
Package: firmware-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.29
Provides: firmware-modules
Depends: kernel-image-2.6.16-1-486-di
Description: Firmware request modules
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: env-preseed
Status: install ok unpacked
Version: 1.15
Description: debconf preseeding via environment variables
Package: mountfloppy
Status: install ok unpacked
Version: 0.5
Depends: di-utils (>= 1.15)
Description: Mounts a floppy
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.100
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.25
Provides: configured-network
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.41), libiw28-udeb (>= 28),
dhcp-client-udeb | dhcp3-client-udeb | pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: usb-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.29
Provides: usb-modules
Depends: kernel-image-2.6.16-1-486-di
Description: USB support
Package: crc-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.29
Provides: crc-modules
Depends: kernel-image-2.6.16-1-486-di
Description: CRC modules
Package: dhcp-client-udeb
Status: install ok installed
Version: 2.0pl5-19.4
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.100+b1
Depends: libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.4
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: fat-modules-2.6.16-1-486-di
Status: install ok unpacked
Version: 1.29
Provides: fat-modules
Depends: kernel-image-2.6.16-1-486-di
Description: FAT filesystem support
Package: debian-installer
Status: install ok installed
Version: netboot-2.6-20060502
Description: debian installation image
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 100
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.10
Depends: choose-mirror
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 88
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.10
Depends: apt-mirror-setup, base-installer (>= 1.49)
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 532
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.56
Depends: libc6 (>= 2.3.6-6), libdebconfclient0-udeb,
libdebian-installer4-udeb (>= 0.41), mounted-partitions,
debootstrap-udeb (>= 0.3.1), created-fstab, archdetect,
di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19)
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: cdebconf-newt-entropy
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 40
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.2
Depends: cdebconf-newt-udeb, libc6 (>= 2.3.5-1), libnewt0.52
Description: cdebconf newt plugin for reading from /dev/random
cdebconf plugin to facilitate reading random data from /dev/random.
Asks the user to enter random characters on the keyboard and shows a
progressbar with percent-of-data read.
Package: cdrom-core-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di,
scsi-core-modules-2.6.16-1-486-di, ide-modules-2.6.16-1-486-di
Provides: cdrom-core-modules
Description: CDROM support
This package contains core CDROM support for the Linux kernel.
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.9
Depends: os-prober, tzsetup-udeb, mounted-partitions
Description: set up clock
Installer-Menu-Item: 62
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 168
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.3.3
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.27
Depends: libc6 (>= 2.3.6-6), libdebian-installer4-udeb (>= 0.41)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 60
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.35
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 352
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2006.04.09-1
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ext3-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 240
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 140
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.12r-8
Depends: libc6 (>= 2.3.5-1)
Description: Partition a hard drive (manual)
fdisk package
Package: grub-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: cdebconf-udeb, kernel-installer, created-fstab, di-utils (>=
1.15), di-utils-mapdevfs, os-prober
Provides: bootable-system
Description: Install GRUB on a hard disk
Installer-Menu-Item: 73
Package: ide-core-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di
Provides: ide-core-modules
Description: IDE support
This package contains core IDE support for the Linux kernel.
Package: ide-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 420
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di, ide-core-modules-2.6.16-1-486-di
Provides: ide-modules
Description: IDE drivers
This package contains IDE drivers for the Linux kernel.
Package: jfs-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 216
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di
Provides: jfs-modules
Description: JFS filesystem support
This package contains the JFS filesystem module for the Linux kernel.
Package: jfsutils-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 1024
Maintainer: Stefan Hornburg (Racke) <racke@linuxia.de>
Version: 1.1.8-1
Description: A stripped-down version of jfsutils, for debian-installer
This package is a jfsutils package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2006.04.09-1
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1564
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.3.6-7
Provides: libc6, libc-udeb, glibc-2.3.6-2, glibc-2.3.5-3
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libdevmapper1.02-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 68
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2:1.02.03-1
Depends: libc6 (>= 2.3.5-1)
Provides: libdevmapper1.02
Description: The Linux Kernel Device Mapper userspace library
This is a udeb, or a microdeb, for the debian-installer.
.
The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
Team's implementation of a minimalistic kernel-space driver that handles
volume management, while keeping knowledge of the underlying device layout
in user-space. This makes it useful for not only LVM, but EVMS, software
raid, and other drivers that create "virtual" block devices.
Package: libparted1.6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 320
Maintainer: Parted Maintainer Team
<parted-maintainers@lists.alioth.debian.org>
Version: 1.6.25.1-3
Depends: libc6 (>= 2.3.6-6), libuuid1-udeb
Provides: libparted1.6-13
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 20
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Version: 1.38+1.39-WIP-2006.04.09-1
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's),
using a standard which is blessed by both Microsoft and DCE, and is
being proposed as an internet standard. See the internet-draft:
.
draft-leach-uuids-guids-01.txt
.
for more information.
.
This is a minimal package for debian-installer.
Package: lilo-installer
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 172
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.15
Depends: cdebconf-udeb, kernel-installer, di-utils (>= 1.15),
di-utils-mapdevfs, fdisk-udeb, os-prober
Provides: bootable-system
Description: Install LILO on a hard disk
Installer-Menu-Item: 75
Package: loop-aes-2.6.16-1-486-di
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 148
Maintainer: Max Vozeler <xam@debian.org>
Version: 3.1d+3
Depends: kernel-image-2.6.16-1-486-di, mount-aes-udeb (>= 2.12p-1)
Provides: loop-aes-modules
Description: loop-AES encryption modules for kernel 2.6.16-1-486-di
This package contains the loop-AES loadable Linux kernel modules
compiled for kernel 2.6.16-1-486-di
.
loop-AES can be used to encrypt disk partitions, removable media,
swap space and other devices. It provides measures to strengthen
the encryption: Passphrase seeds, multiple hash iterations, MD5 IV
and use of alternating encryption keys.
.
Encryption keys can be stored in a GnuPG-encrypted keyfile, which
allows the passphrase to be changed without re-encryption. Keyfiles
can also be encrypted asymmetrically for multi-user access.
.
This package includes the cipher modules blowfish, twofish and
serpent in addition to the default cipher (AES).
.
If you compiled a custom kernel, you will most likely need to
compile a custom version of these modules as well. The package
loop-aes-source has been provided for this purpose.
Package: loop-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di
Provides: loop-modules
Description: Loopback filesystem support
This package contains loopback filesystem support for the Linux kernel.
Package: lvm2-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 400
Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>
Version: 2.02.02-1
Depends: libc6 (>= 2.3.5-1), libdevmapper1.02 (>= 2:1.02.02-2)
Description: The Linux Logical Volume Manager
This is a udeb, or a microdeb, for the debian-installer.
.
This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM
supports enterprise level volume management of disk and disk subsystems
by grouping arbitrary disks into volume groups. The total capacity of
volume groups can be allocated to logical volumes, which are accessed as
regular block devices.
Package: lvmcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 428
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: cdebconf-udeb, md-modules, lvm2-udeb, parted-udeb, di-utils (>=
1.15)
Description: lvmcfg without the main menu item
Package: md-modules-2.6.16-1-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 340
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di
Provides: md-modules
Description: RAID and LVM support
This package contains RAID and LVM modules for the Linux kernel.
Package: mdadm-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 96
Maintainer: Debian/Ubuntu mdadm maintainers
<pkg-mdadm-devel@lists.alioth.debian.org>
Version: 1.12.0-1
Depends: libc6 (>= 2.3.5-1)
Description: tool to administer Linux md device arrays (software RAID)
mdadm is a program that can be used to create, manage, and monitor MD
devices.
.
mdadm-udeb is a minimal package used by the debian-installer.
Package: mdcfg-utils
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 312
Maintainer: Paul Fleischer <proguy@proguy.dk>
Version: 1.14
Depends: cdebconf-udeb, md-modules, mdadm-udeb, partconf-find-partitions
Description: Configure MD devices
Use this module to configure the MD devices.
Package: mkreiserfs-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 148
Maintainer: Ed Boraas <ed@debian.org>
Version: 1:3.6.19-2
Depends: libc6 (>= 2.3.5-1), libuuid1
Description: User-level tools for ReiserFS filesystems
This installer module contains the utility to create ReiserFS filesystems.
.
Homepage: http://www.namesys.com/
Package: mount-aes-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 200
Maintainer: Max Vozeler <xam@debian.org>
Version: 2.12r-8
Depends: libblkid1 (>= 1.37-1), libc6 (>= 2.3.5-1), libuuid1-udeb
Description: Mount utils for loop-AES
loop-AES patched mount, losetup and swapon
Package: nic-usb-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 188
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di,
nic-shared-modules-2.6.16-1-486-di, usb-modules-2.6.16-1-486-di,
firmware-modules-2.6.16-1-486-di
Provides: nic-usb-modules
Description: USB NIC drivers
This package contains USB network adapter drivers for the Linux kernel.
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 116
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.08
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: ntfstools-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 164
Maintainer: David MartÃnez Moreno <ender@debian.org>
Version: 1.12.1-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for doing neat things in NTFS partitions from Linux -
udeb
Currently this udeb contains only ntfsresize.
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 68
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.09
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: parport-modules-2.6.16-1-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 116
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di
Provides: parport-modules
Description: Parallel port support
This package contains parallel port drivers for the Linux kernel.
Package: partconf-find-partitions
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.14
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41),
libparted1.6-13 (>= 1.6.24), libparted1.6-udeb
Description: debian-installer utility for finding partitions
Helper program for finding partitions and detecting their size and
existing file system.
Package: parted-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 52
Maintainer: Parted Maintainer Team
<parted-maintainers@lists.alioth.debian.org>
Version: 1.6.25.1-3
Depends: libc6 (>= 2.3.6-6), libparted1.6-udeb (>= 1.6.24)
Provides: parted
Description: The GNU Parted disk partition resizing program
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package is similar to the "big" parted package, but has
less cosmetical features resulting in smaller binary. Intended
to be used in debian-installer.
.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 652
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 51
Depends: partman-base, partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-auto-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 116
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 10
Depends: partman-base (>= 73), partman-auto (>= 51), partman-lvm,
di-utils (>= 1.15), lvm2-udeb
Description: Automatically partition storage devices using LVM
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 776
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 81
Depends: libc6 (>= 2.3.5-1), libparted1.6-13 (>= 1.6.24),
libparted1.6-udeb, partman-partitioning, partman-target, archdetect,
harddrive-detection, di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives,
created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 508
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 120
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-crypto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 740
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2
Depends: partman-base (>= 73), mount-aes-udeb, cdebconf-newt-entropy,
loop-aes-modules, libc6 (>= 2.3.6-6), cdebconf-udeb
Description: Add to partman support for loop-AES and dm-crypt crypto
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 200
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 40
Depends: e2fsprogs-udeb, ext3-modules, partman-basicfilesystems,
di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-jfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 232
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 16
Depends: jfsutils-udeb, jfs-modules, partman-basicfilesystems, di-utils
(>= 1.14)
Provides: partman-filesystem
Description: Add support for jfs to partman
Package: partman-lvm
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: lvmcfg-utils, lvm2-udeb, partman-base (>= 73), di-utils (>= 1.14)
Description: Add to partman support for LVM
Package: partman-md
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 144
Maintainer: Paul Fleischer <proguy@proguy.dk>
Version: 24
Depends: mdadm-udeb, mdcfg-utils, partman-base (>= 73)
Description: Add to partman support for MD
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 39
Depends: ntfstools-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-reiserfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 204
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 30
Depends: mkreiserfs-udeb, reiserfs-modules, partman-basicfilesystems,
di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for reiserfs
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 42
Depends: partman-basicfilesystems, partman-basicmethods, di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: partman-xfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 200
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 28
Depends: xfsprogs-udeb, xfs-modules, partman-basicfilesystems, di-utils
(>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for xfs
Package: pcmcia-storage-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 52
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di, ide-core-modules-2.6.16-1-486-di,
cdrom-core-modules-2.6.16-1-486-di, pcmcia-modules-2.6.16-1-486-di
Provides: pcmcia-storage-modules
Description: PCMCIA storage drivers
This package contains PCMCIA storage drivers for the Linux kernel.
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 28
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.06
Depends: apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: prebaseconfig
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.16
Depends: archdetect, base-installer, created-fstab, bootable-system
Description: Finish the installation and reboot
finish the installation and reboot
Installer-Menu-Item: 78
Package: reiserfs-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 276
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
Package: sata-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 340
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di, scsi-core-modules-2.6.16-1-486-di
Provides: sata-modules
Description: SATA drivers
This package contains SATA drivers for the Linux kernel.
Package: scsi-common-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 704
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di,
scsi-core-modules-2.6.16-1-486-di, cdrom-core-modules-2.6.16-1-486-di
Provides: scsi-common-modules
Description: Very common SCSI drivers
This package contains very common SCSI drivers for the Linux kernel.
Package: scsi-extra-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: scsi-modules-2.6.16-1-486-di, scsi-core-modules-2.6.16-1-486-di
Provides: scsi-extra-modules
Description: Uncommon SCSI drivers
This package contains uncommon SCSI drivers for the Linux kernel.
This includes SCSI RAID drivers, and some of the less common SCSI
controllers.
Package: scsi-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 1112
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di,
scsi-core-modules-2.6.16-1-486-di, parport-modules-2.6.16-1-486-di,
cdrom-core-modules-2.6.16-1-486-di, firmware-modules-2.6.16-1-486-di
Provides: scsi-modules
Description: SCSI drivers
This package contains SCSI drivers for the Linux kernel.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 244
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.9
Depends: localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: usb-storage-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: ide-core-modules-2.6.16-1-486-di,
scsi-core-modules-2.6.16-1-486-di, usb-modules-2.6.16-1-486-di
Provides: usb-storage-modules
Description: USB storage support
This package contains the USB storage driver for the Linux kernel.
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 236
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.1
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: xfs-modules-2.6.16-1-486-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 580
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di
Provides: xfs-modules
Description: XFS filesystem support
This package contains the XFS filesystem module for the Linux kernel.
Package: xfsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 268
Maintainer: Nathan Scott <nathans@debian.org>
Version: 2.7.16-1
Depends: libc6 (>= 2.3.5-1), libuuid1
Description: A stripped-down version of xfsprogs, for debian-installer
This package is an xfsprogs package built for reduced size, so that it
can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway, it should fail to install.
Package: ntfs-modules-2.6.16-1-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 256
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di
Provides: ntfs-modules
Description: NTFS filesystem support
This package contains the NTFS file system module for the Linux kernel.
Package: qnx4-modules-2.6.16-1-486-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 48
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.29
Depends: kernel-image-2.6.16-1-486-di
Provides: qnx4-modules
Description: QNX4 filesystem support
This package contains the QNX4 filesystem module for the Linux kernel.
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.15-1-686-smp
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii reportbug 3.20 reports bugs in the Debian
distrib
-- no debconf information
Reply to: