Bug#288280: sarge cd install hangs in reboot
On Sunday 02 January 2005 21:27, Johan Ebbinghaus wrote:
> Comments/Problems:
> During reboot the system hangs. This is what can be
> seen on the screen when the boot hangs:
> -------------------------------------------
> /etc/rcS.d/S38discover: line 204: 389 segmentation
> fault modprobe $MODULE
> usb-uhci disabled in configuration
> Loading ehci-hcd module.
> <6>usb.c: registered new driver usbdevfs
> usb.c: registered new driver hub
> -------------------------------------------
Just before this point, there should be a line listing which module was
going to be installed.
Before that, there should also be a line enumerating the modules that
discover is going to try to install (and the sequence in which it will do
this).
From that you may be able to determine which module is causing the
problems.
Next step is to blacklist these modules in /etc/discover/...
See our FAQ [1] - question 28 - for instructions on how to use the
installer for this. (You can also check /target/var/log/kern.log for any
messages from the failed boot while you're at it.)
Note: you may also have to blacklist the same module for hotplug.
Please let us know the results so we can reassign this report to the
kernel.
[1] http://wiki.debian.net/index.cgi?DebianInstallerFAQ
Cheers,
FJP
Reply to: