Bug#305127: installation-reports: sarge on Dell Dimension 8400
Package: installation-reports
Severity: normal
Debian-installer-version: Apr 12 2005; http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc3/sarge-i386-businesscard.iso
uname -a: Linux dydybo 2.6.8-dydybo #1 Thu Apr 14 19:53:58 JST 2005 i686 GNU/Linux
Date: Apr 1 2005
Method: network install from ftp2.jp.debian.jp
Machine: Dell Dimension 8400
Processor: Pentium 4 540 (3.2GHz)
Memory: 2Gbytes
Root Device: SATA 250Gbytes
Root Size/partition table:
Disk /dev/sda: 250.0 GB, 250000000000 bytes
255 heads, 63 sectors/track, 30394 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 8 64228+ 7 HPFS/NTFS
/dev/sda2 9 30394 244075545 f W95 Ext'd (LBA)
/dev/sda5 9 2558 20482843+ 7 HPFS/NTFS
/dev/sda6 2559 3833 10241406 c W95 FAT32 (LBA) /windows
/dev/sda7 * 3834 3849 128488+ 83 Linux /boot
/dev/sda8 3850 3971 979933+ 83 Linux /
/dev/sda9 3972 5187 9767488+ 83 Linux /var
/dev/sda10 5188 8834 29294496 83 Linux /usr
/dev/sda11 8835 10050 9767488+ 83 Linux /usr/local
/dev/sda12 30030 30394 2931831 82 Linux swap
/dev/sda13 10051 30029 160481286 83 Linux /home
Output of lspci and lspci -n:
% lspci
0000:00:00.0 Host bridge: Intel Corp. 925X Memory Controller Hub (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 925X PCI Express Root Port (rev 04)
0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
0000:00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
0000:00:1f.2 IDE interface: Intel Corp. 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5b60
0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 5b70
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
0000:04:02.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
0000:04:02.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 04)
0000:04:02.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
% lspci -n
0000:00:00.0 0600: 8086:2584 (rev 04)
0000:00:01.0 0604: 8086:2585 (rev 04)
0000:00:1c.0 0604: 8086:2660 (rev 03)
0000:00:1c.1 0604: 8086:2662 (rev 03)
0000:00:1d.0 0c03: 8086:2658 (rev 03)
0000:00:1d.1 0c03: 8086:2659 (rev 03)
0000:00:1d.2 0c03: 8086:265a (rev 03)
0000:00:1d.3 0c03: 8086:265b (rev 03)
0000:00:1d.7 0c03: 8086:265c (rev 03)
0000:00:1e.0 0604: 8086:244e (rev d3)
0000:00:1f.0 0601: 8086:2640 (rev 03)
0000:00:1f.1 0101: 8086:266f (rev 03)
0000:00:1f.2 0101: 8086:2652 (rev 03)
0000:00:1f.3 0c05: 8086:266a (rev 03)
0000:01:00.0 0300: 1002:5b60
0000:01:00.1 0380: 1002:5b70
0000:02:00.0 0200: 14e4:1677 (rev 01)
0000:04:02.0 0401: 1102:0004 (rev 04)
0000:04:02.1 0980: 1102:7003 (rev 04)
0000:04:02.2 0c00: 1102:4001 (rev 04)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O/E]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O/E]
Comments/Problems:
I got the same problem as #275465
(http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=275465),
but I managed to success the installation as follows.
The first time reboot (just after cdrom boot) succeeds, but
unfortunately the next reboot fails due to two reasons.
The first one is that the kernel hangs around hwclock at startup (and
also shut-down). The second one is that the system fails to detect
the network device.
So once the installation process ends, you have to work the two issues
below.
For the first one, follow the instruction of
http://craige.mcwhirter.com.au/blog/archive/2005/01/25/issues_installing_ubuntu_410_w#body
You must edit the following files:
/etc/init.d/hwclock.sh
/etc/init.d/hwclockfirst.sh
/usr/sbin/tzsetup
Add `--directisa' option to every occurence of `hwclock' command.
For the second one, you have to remove tg3 driver from and install
bcm5700 to the kernel. Get the `bcm5700-source' package and install
it. Then reconfigure kernel to remove both `tg3.ko' and `eth1394.ko'
modules. Append `alias eth0=bcm5700' to the /etc/modutils/arch/i386
and run update-modules and depmod.
That's all.
Hope this report helps you.
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.8-dydybo
Locale: LANG=ja_JP.eucJP, LC_CTYPE=ja_JP.eucJP (charmap=EUC-JP)
Reply to: