[Patch] Typo corrections
Hi all,
the attached patch fixes a lot of typos such as s/can not/cannot/,
s/seperate/separate/ in documentation and partly in code comments.
Please apply it.
Since it's only a trivial fix I suggest to apply it in Sarge trunk as well
if possible.
Please CC: me.
Jens
Index: installer/build/daily
===================================================================
--- installer/build/daily (Revision 26549)
+++ installer/build/daily (Arbeitskopie)
@@ -1,9 +1,9 @@
#!/bin/sh -e
# daily stuff for debian-installer
-# succesor of daily-build
+# successor of daily-build
-# this scripts allows to seperate build and upload
+# this scripts allows to separate build and upload
usage () {
@@ -103,7 +103,7 @@
upload
;;
bau) # subcommand
- # this is for compatiblity with "daily-build"
+ # this is for compatibility with "daily-build"
build
upload
;;
Index: installer/build/boot/m68k/vme-tftplilo.conf
===================================================================
--- installer/build/boot/m68k/vme-tftplilo.conf (Revision 26549)
+++ installer/build/boot/m68k/vme-tftplilo.conf (Arbeitskopie)
@@ -1,5 +1,5 @@
##------------------------------------------------------------------------##
-# Debain GNU/Linux tftplilo.conf Installation and Boot configuration.
+# Debian GNU/Linux tftplilo.conf Installation and Boot configuration.
#
##------------------------------------------------------------------------##
Index: installer/build/boot/m68k/amiga/cv64.txt
===================================================================
--- installer/build/boot/m68k/amiga/cv64.txt (Revision 26549)
+++ installer/build/boot/m68k/amiga/cv64.txt (Arbeitskopie)
@@ -47,7 +47,7 @@
Window size default button selected; same size as selected mode
Once you have AmigaDOS booted with the selected graphics mode, you
-boot into Linux using 'amiboot', Lilo can NOT be used. Here is an example
+boot into Linux using 'amiboot', Lilo CANNOT be used. Here is an example
for using the mode 640x480 with 8 bits/pixel:
amiboot -v -k vmlinux root=/dev/sda1 video=cyberfb:640x480-8
The "-v" option prevents reseting of the graphics board so the AmigaDOS
Index: installer/debian/changelog
===================================================================
--- installer/debian/changelog (Revision 26549)
+++ installer/debian/changelog (Arbeitskopie)
@@ -1556,7 +1556,7 @@
- pkg-lists/mirror_udeb: lists for a partial mirror suitable for the CDs
- Drop pump-udeb (netboot on alpha, s390 and sparc) in favour of
dhcp-client-udeb
- - debain/control: added Build-Depends: mkisofs
+ - debian/control: added Build-Depends: mkisofs
- daily-build: changed to copy last days images and rsync new ones
- daily-build: don't let the builder wait for logs, use tee
- No discover for mips/mipsel
Index: installer/doc/devel/historic/docbook/kernel-policy.html
===================================================================
--- installer/doc/devel/historic/docbook/kernel-policy.html (Revision 26549)
+++ installer/doc/devel/historic/docbook/kernel-policy.html (Arbeitskopie)
@@ -76,7 +76,7 @@
This version includes the arch or subarch. For example: 2.4.21-i386, 2.4.21-riscstation.
</p></dd></dl></div><p>
</p></div></div><div class="section" lang="en" xml:lang="en"><div class="titlepage"><div><div><h2 class="title" style="clear: both"><a id="id3053383"></a>Bootstrap package for debian-installer use kernel images</h2></div></div><div></div></div><p>
- The debian-installer use kernel images should be built seperately
+ The debian-installer use kernel images should be built separately
to make changes in the module list without need to rebuild the gerneral
used image.
</p><p>
Index: installer/doc/devel/historic/docbook/kernel-policy.xml
===================================================================
--- installer/doc/devel/historic/docbook/kernel-policy.xml (Revision 26549)
+++ installer/doc/devel/historic/docbook/kernel-policy.xml (Arbeitskopie)
@@ -192,7 +192,7 @@
<title>Bootstrap package for debian-installer use kernel images</title>
<para>
- The debian-installer use kernel images should be built seperately
+ The debian-installer use kernel images should be built separately
to make changes in the module list without need to rebuild the gerneral
used image.
</para>
Index: installer/doc/devel/historic/hardware-detection.txt
===================================================================
--- installer/doc/devel/historic/hardware-detection.txt (Revision 26549)
+++ installer/doc/devel/historic/hardware-detection.txt (Arbeitskopie)
@@ -16,7 +16,7 @@
space on an install media unless that type of hardware is supported. So a
dedicated floppy and ethernet installer should not have to worry about
modem and cdrom detection code. This suggests that various detection bits
-should be in seperate modules.
+should be in separate modules.
We want to offer three levels of detection, and allow the user to chose
which is suitable:
Index: installer/doc/manual/da/preparing/pre-install-bios-setup.xml
===================================================================
--- installer/doc/manual/da/preparing/pre-install-bios-setup.xml (Revision 26549)
+++ installer/doc/manual/da/preparing/pre-install-bios-setup.xml (Arbeitskopie)
@@ -139,7 +139,7 @@
<sect3><title>More than 64 MB RAM</title>
<para>
-The Linux Kernel can not always detect what amount of RAM you have. If
+The Linux Kernel cannot always detect what amount of RAM you have. If
this is the case please look at <xref linkend="boot-parms"/>.
</para>
Index: installer/doc/manual/de/install-methods/usb-setup/i386.xml
===================================================================
--- installer/doc/manual/de/install-methods/usb-setup/i386.xml (Revision 26549)
+++ installer/doc/manual/de/install-methods/usb-setup/i386.xml (Arbeitskopie)
@@ -5,7 +5,7 @@
<title>Partitionieren eines USB-Sticks auf &arch-title;-Systemen</title>
<para>
-Wir werden hier erlÀutern, wie Sie den Memory-Stick einrichten, sodass nur
+Wir werden hier erlÀutern, wie Sie den Memory-Stick einrichten, so dass nur
die erste Partition genutzt wird statt des kompletten USB-Speichers.
</para><note><para>
Index: installer/doc/manual/de/install-methods/usb-setup/powerpc.xml
===================================================================
--- installer/doc/manual/de/install-methods/usb-setup/powerpc.xml (Revision 26549)
+++ installer/doc/manual/de/install-methods/usb-setup/powerpc.xml (Arbeitskopie)
@@ -6,7 +6,7 @@
<para>
Die meisten USB-Sticks sind nicht derart vorkonfiguriert, dass OpenFirmware
-davon booten kann, sodass Sie den Stick neu partitionieren mÃŒssen.
+davon booten kann, so dass Sie den Stick neu partitionieren mÃŒssen.
Auf Mac-Systemen fÃŒhren Sie <userinput>mac-fdisk /dev/sda</userinput> aus,
erzeugen mit dem <userinput>i</userinput>-Befehl eine neue Partitionstabelle
und dann eine neue Partition des Typs Apple_Bootstrap (mit dem
@@ -48,7 +48,7 @@
Hier wieder die Warnung, den richtigen GerÀtenamen zu verwenden.
Die Partition darf fÃŒr diese Prozedur nicht anderweitig ins Dateisystem
eingehÀngt sein. Es wird hierbei der Bootloader auf die Partition geschrieben
-und mittels der HFS-Programme passend gekennzeichnet, sodass OpenFirmware ihn startet.
+und mittels der HFS-Programme passend gekennzeichnet, so dass OpenFirmware ihn startet.
Nachdem dies erledigt ist, sollten die restliche Vorbereitungen am USB-Stick mit
den normalen Unix-Programmen vorgenommen werden.
Index: installer/doc/manual/de/partitioning/partition/alpha.xml
===================================================================
--- installer/doc/manual/de/partitioning/partition/alpha.xml (Revision 26549)
+++ installer/doc/manual/de/partitioning/partition/alpha.xml (Arbeitskopie)
@@ -36,7 +36,7 @@
</para><para>
Weil <command>aboot</command> in die ersten paar Sektoren der Festplatte
-geschrieben wird (zur Zeit braucht es ungefÀhr 70 Kilobytes bzw. 150
+geschrieben wird (zurzeit braucht es ungefÀhr 70 Kilobytes bzw. 150
Sektoren), <emphasis>mÃŒssen</emphasis> Sie auÃerdem dafÃŒr genug freien
Platz am Anfang der Festplatte freilassen. FrÃŒher wurde vorgeschlagen, dass Sie
eine kleine unformatierte Partition am Anfang der Festplatte erstellen. Aus
Index: installer/doc/manual/de/boot-installer/m68k.xml
===================================================================
--- installer/doc/manual/de/boot-installer/m68k.xml (Revision 26549)
+++ installer/doc/manual/de/boot-installer/m68k.xml (Arbeitskopie)
@@ -359,7 +359,7 @@
</para><para>
-Das Starten von einer Boot-Floppy wird zur Zeit nur auf Atari und VME
+Das Starten von einer Boot-Floppy wird zurzeit nur auf Atari und VME
(auf VME benötigen Sie ein SCSI-Floppy-Laufwerk) unterstÌtzt.
</para>
Index: installer/doc/manual/en/appendix/example-preseed.xml
===================================================================
--- installer/doc/manual/en/appendix/example-preseed.xml (Revision 26549)
+++ installer/doc/manual/en/appendix/example-preseed.xml (Arbeitskopie)
@@ -328,7 +328,7 @@
# Monitor autodetection is recommended.
xserver-xfree86 xserver-xfree86/autodetect_monitor boolean true
-# Uncomment if you have a LCD display.
+# Uncomment if you have an LCD display.
#xserver-xfree86 xserver-xfree86/config/monitor/lcd boolean true
# X has three configuration paths for the monitor. Here's how to preseed
# the "medium" path, which is always available. The "simple" path may not
Index: installer/doc/manual/en/boot-installer/i386.xml
===================================================================
--- installer/doc/manual/en/boot-installer/i386.xml (Revision 26549)
+++ installer/doc/manual/en/boot-installer/i386.xml (Arbeitskopie)
@@ -234,7 +234,7 @@
</para><para>
-For installing from a LS-120 drive (ATAPI version) with a set of
+For installing from an LS-120 drive (ATAPI version) with a set of
floppies, you need to specify the virtual location for the floppy
device. This is done with the <emphasis>root=</emphasis> boot
argument, giving the device that the ide-floppy driver maps the device
Index: installer/doc/manual/eu/preparing/pre-install-bios-setup.xml
===================================================================
--- installer/doc/manual/eu/preparing/pre-install-bios-setup.xml (Revision 26549)
+++ installer/doc/manual/eu/preparing/pre-install-bios-setup.xml (Arbeitskopie)
@@ -163,7 +163,7 @@
<sect3><title>More than 64 MB RAM</title>
<para>
-The Linux Kernel can not always detect what amount of RAM you have. If
+The Linux Kernel cannot always detect what amount of RAM you have. If
this is the case please look at <xref linkend="boot-parms"/>.
</para>
Index: installer/doc/manual/it/preparing/pre-install-bios-setup.xml
===================================================================
--- installer/doc/manual/it/preparing/pre-install-bios-setup.xml (Revision 26549)
+++ installer/doc/manual/it/preparing/pre-install-bios-setup.xml (Arbeitskopie)
@@ -139,7 +139,7 @@
<sect3><title>More than 64 MB RAM</title>
<para>
-The Linux Kernel can not always detect what amount of RAM you have. If
+The Linux Kernel cannot always detect what amount of RAM you have. If
this is the case please look at <xref linkend="boot-parms"/>.
</para>
Index: installer/doc/talks/d-i_internals/d-i_internals.tex
===================================================================
--- installer/doc/talks/d-i_internals/d-i_internals.tex (Revision 26549)
+++ installer/doc/talks/d-i_internals/d-i_internals.tex (Arbeitskopie)
@@ -228,7 +228,7 @@
\item Progress bars
\item Error notes
\end{itemize}
- \item Seperation of protocol, storage back-end and front-end
+ \item Separation of protocol, storage back-end and front-end
\begin{itemize}
\item Preseeding of debconf database for automated installs
\item In the future possible to have other back-ends (eg. LDAP server)
@@ -468,7 +468,7 @@
}
\only<2>{
\begin{itemize}
- \item Seperate small udebs to install the boot loader
+ \item Separate small udebs to install the boot loader
\item Grub currently default on i386
\item Special os-prober udeb to detect other operating systems and to offer multiboot
\item nobootloader udeb to skip bootloader installation on systems that don't need a boot loader
Index: packages/mdcfg/mdcfg.sh
===================================================================
--- packages/mdcfg/mdcfg.sh (Revision 26549)
+++ packages/mdcfg/mdcfg.sh (Arbeitskopie)
@@ -96,7 +96,7 @@
RAW_PARTITIONS=`/usr/lib/partconf/find-partitions --ignore-fstype 2>/dev/null | grep "[[:space:]]RAID[[:space:]]" |cut -f1`;
# Convert it into a proper list form for a select question
- # (comma seperated)
+ # (comma separated)
NUM_PART=0
for i in ${RAW_PARTITIONS}; do
DEV=`echo ${i}|sed -e "s/\/dev\///"`
Index: packages/cdebconf/configure
===================================================================
--- packages/cdebconf/configure (Revision 26549)
+++ packages/cdebconf/configure (Arbeitskopie)
@@ -487,9 +487,9 @@
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+ { echo "configure: error: cannot find sources in $ac_confdir or .." 1>&2; exit 1; }
else
- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+ { echo "configure: error: cannot find sources in $srcdir" 1>&2; exit 1; }
fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
@@ -553,7 +553,7 @@
fi
done
if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in . $srcdir/." 1>&2; exit 1; }
+ { echo "configure: error: cannot find install-sh or install.sh in . $srcdir/." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
Index: packages/cdebconf/doc/modules.txt
===================================================================
--- packages/cdebconf/doc/modules.txt (Revision 26549)
+++ packages/cdebconf/doc/modules.txt (Arbeitskopie)
@@ -44,7 +44,7 @@
- char *language: ISO code for language (ll or ll_LL)
- char *defaultval: the template's default value, as a string
- char *choices: if the template's type is choices based, here the choices
- are listed in a single string, seperated by commas
+ are listed in a single string, separated by commas
- char *description: a description of the template XXX must be under ... chars?
- char *extended_description: a longer description
Index: packages/cdebconf/src/configuration.c
===================================================================
--- packages/cdebconf/src/configuration.c (Revision 26549)
+++ packages/cdebconf/src/configuration.c (Arbeitskopie)
@@ -94,7 +94,7 @@
}
/**
- * @brief recursive builds the complete tag name, seperated by ::
+ * @brief recursive builds the complete tag name, separated by ::
* @param const struct configitem *top - head of config tree
* @param const struct configitem *stop - when to stop
* @param char *tag - buffer to build the tag
Index: packages/po/et.po
===================================================================
--- packages/po/et.po (Revision 26549)
+++ packages/po/et.po (Arbeitskopie)
@@ -1540,7 +1540,7 @@
msgid ""
"Please enter the directory in which the mirror of the Debian archive is "
"located."
-msgstr "Palun sisesta kataloog, kus Debaini arhiivi peegeldus asub."
+msgstr "Palun sisesta kataloog, kus Debiani arhiivi peegeldus asub."
#. Type: string
#. Description
Index: packages/po/de.po
===================================================================
--- packages/po/de.po (Revision 26549)
+++ packages/po/de.po (Arbeitskopie)
@@ -1261,7 +1261,7 @@
"Your network is probably not using the DHCP protocol. Alternatively, the "
"DHCP server may be slow or some network hardware is not working properly."
msgstr ""
-"Ihr Netzwerk benutzt möglicherweise nicht das DHCP-Protokoll. Desweiteren "
+"Ihr Netzwerk benutzt möglicherweise nicht das DHCP-Protokoll. Des Weiteren "
"könnte der DHCP-Server sehr langsam sein oder die Netzwerk-Hardware arbeitet "
"nicht korrekt."
@@ -2133,7 +2133,7 @@
"debian-boot@lists.debian.org with information."
msgstr ""
"Das Partitionierungsprogramm hat nicht genug Informationen ÃŒber den Standard-"
-"Typ der Partitionstabelle Ihrer Architektur. Bitte senden Sie eine Email "
+"Typ der Partitionstabelle Ihrer Architektur. Bitte senden Sie eine E-Mail "
"mit mehr Informationen an debian-boot@lists.debian.org."
#. Type: boolean
@@ -2888,7 +2888,7 @@
#. Choices
#: ../partman-basicfilesystems.templates:64
msgid "/home - user home directories"
-msgstr "/home - Heimatverzeichnisse der Benutzer"
+msgstr "/home - Home-Verzeichnisse der Benutzer"
# ../partman-basicfile systems.templates:61
#. Type: select
Index: packages/countrychooser/debian/changelog
===================================================================
--- packages/countrychooser/debian/changelog (Revision 26549)
+++ packages/countrychooser/debian/changelog (Arbeitskopie)
@@ -66,7 +66,7 @@
countrychooser (1.06) unstable; urgency=low
* Frans Pop
- - Use seperate template for each language for shortlists.
+ - Use separate template for each language for shortlists.
- Set default country in shortlists. Closes: #265161
- Change name of template to countrychooser/shortlist
* Christian Perrier
Index: packages/kbd-chooser/kbd-chooser.c
===================================================================
--- packages/kbd-chooser/kbd-chooser.c (Revision 26549)
+++ packages/kbd-chooser/kbd-chooser.c (Arbeitskopie)
@@ -172,7 +172,7 @@
/**
* @brief compare langs list with the preferred locale
- * @param langs: colon-seperated list of locales
+ * @param langs: colon-separated list of locales
* @return score 0-8
*/
int
Index: packages/kbd-chooser/debian/changelog
===================================================================
--- packages/kbd-chooser/debian/changelog (Revision 26549)
+++ packages/kbd-chooser/debian/changelog (Arbeitskopie)
@@ -708,7 +708,7 @@
* Claus Hindsgaul
- Update da.po (Danish) translation.
* Alastair McKinstry
- - debian-installer/language may be a colon-seperated list of
+ - debian-installer/language may be a colon-separated list of
languages. cope
- Select right keyboard when debian-installer/locale code is of the
form 'de_DE@euro' rather than simply 'de'. Closes: #219929.
Index: packages/kbd-chooser/usb-kbd.c
===================================================================
--- packages/kbd-chooser/usb-kbd.c (Revision 26549)
+++ packages/kbd-chooser/usb-kbd.c (Arbeitskopie)
@@ -54,7 +54,7 @@
* If the USB keyboard vendor is Apple, set PRESENT = TRUE.
* For other keyboard vendors and if architecture is i386 or powerpc (prep and chrp),
* force the installer to display the list of AT keymaps. This is needed because, for
- * 2.6 kernels, we can not assume that a AT connector will be detected in at-kbd.c.
+ * 2.6 kernels, we cannot assume that a AT connector will be detected in at-kbd.c.
*/
kbd_t *p;
usb_data *data;
Index: packages/partman/partman-palo/init.d/palo
===================================================================
--- packages/partman/partman-palo/init.d/palo (Revision 26549)
+++ packages/partman/partman-palo/init.d/palo (Arbeitskopie)
@@ -23,7 +23,7 @@
while { read_line flag; [ "$flag" ]; }; do
if [ "$flag" = palo ]; then
palo=yes
- # can not break here
+ # cannot break here
fi
done
close_dialog
Index: packages/partman/partman-lvm/init.d/lvm
===================================================================
--- packages/partman/partman-lvm/init.d/lvm (Revision 26549)
+++ packages/partman/partman-lvm/init.d/lvm (Arbeitskopie)
@@ -44,7 +44,7 @@
while { read_line flag; [ "$flag" ]; }; do
if [ "$flag" = lvm ]; then
lvm=yes
- # can not break here
+ # cannot break here
fi
done
close_dialog
Index: packages/partman/partman-lvm/undo.d/lvm
===================================================================
--- packages/partman/partman-lvm/undo.d/lvm (Revision 26549)
+++ packages/partman/partman-lvm/undo.d/lvm (Arbeitskopie)
@@ -36,7 +36,7 @@
while { read_line flag; [ "$flag" ]; }; do
if [ "$flag" = lvm ]; then
lvm=yes
- # can not break here
+ # cannot break here
fi
done
close_dialog
Index: packages/partman/partman-newworld/init.d/newworld
===================================================================
--- packages/partman/partman-newworld/init.d/newworld (Revision 26549)
+++ packages/partman/partman-newworld/init.d/newworld (Arbeitskopie)
@@ -23,7 +23,7 @@
while { read_line flag; [ "$flag" ]; }; do
if [ "$flag" = boot ]; then
newworld=yes
- # can not break here
+ # cannot break here
fi
done
close_dialog
Index: packages/partman/partman/debian/changelog
===================================================================
--- packages/partman/partman/debian/changelog (Revision 26549)
+++ packages/partman/partman/debian/changelog (Arbeitskopie)
@@ -101,7 +101,7 @@
- parted_server.c (command_get_resize_range): do not consider file
systems longer than the containing partition
- parted_server.c (command_get_resize_range): do not give resize range
- for file systems we can not resize
+ for file systems we cannot resize
- parted_server.c: new commands VIRTUAL_RESIZE_PARTITION and
GET_VIRTUAL_RESIZE_RANGE. They are undocumented and hopefully will
exist only temporary to resize NTFS partition.
@@ -702,7 +702,7 @@
Thanks to Thiemo Seufer, Nicholas Breen and Maitland Bottoms,
closes: #220990, #238363, #239648.
- do not provide partitioned-harddrives on mips (parted recognises but
- can not edit properly dvh disk labels
+ cannot edit properly dvh disk labels
- change the main-menu number of partman on mips from 49 to 44: use
partitioner to partition harddrives but partman instead of partconf
- definitions.sh (partition_tree_choices): shorten the indent of the
@@ -1079,7 +1079,7 @@
it, to allow for database preseeding.
- Stop using non-breaking spaces, using new space escape code in
recent cdebconf. Fixes display on non-framebuffer terminal.
- (Anton Zinoviev: I reenabled non-breaking spaces as I can not use
+ (Anton Zinoviev: I reenabled non-breaking spaces as I cannot use
escaped spaces. Properly setup non-framebuffer terminal must be
able to display non-break spaces.)
- Enhance confirm_new_label template text.
@@ -1198,7 +1198,7 @@
- parted_server.c (command_get_resize_range): add
deactivate_exception_handler
- parted_server.c (resize_partition): add check for the case when
- there is a file system but it can not be opened
+ there is a file system but it cannot be opened
- debian/templates: state that `partition the storage devices' is an
alternative partitioner rather than additional partitioning step in
the installer process
Index: packages/partman/partman-efi/init.d/efi
===================================================================
--- packages/partman/partman-efi/init.d/efi (Revision 26549)
+++ packages/partman/partman-efi/init.d/efi (Arbeitskopie)
@@ -23,7 +23,7 @@
while { read_line flag; [ "$flag" ]; }; do
if [ "$flag" = boot ]; then
efi=yes
- # can not break here
+ # cannot break here
fi
done
close_dialog
Index: packages/partman/partman-prep/update.d/prep
===================================================================
--- packages/partman/partman-prep/update.d/prep (Revision 26549)
+++ packages/partman/partman-prep/update.d/prep (Arbeitskopie)
@@ -56,7 +56,7 @@
# The following is a hack and will be removed in future versions of
-# partman. It ensures that the prep partition can not be used for
+# partman. It ensures that the prep partition cannot be used for
# some regular file system.
if [ "$method" = prep ]; then
if [ -f $id/format ]; then
Index: packages/partman/partman-prep/init.d/prep
===================================================================
--- packages/partman/partman-prep/init.d/prep (Revision 26549)
+++ packages/partman/partman-prep/init.d/prep (Arbeitskopie)
@@ -23,7 +23,7 @@
while { read_line flag; [ "$flag" ]; }; do
if [ "$flag" = prep ]; then
prep=yes
- # can not break here
+ # cannot break here
fi
done
close_dialog
Index: packages/partman/partman-partitioning/debian/changelog
===================================================================
--- packages/partman/partman-partitioning/debian/changelog (Revision 26549)
+++ packages/partman/partman-partitioning/debian/changelog (Arbeitskopie)
@@ -83,7 +83,7 @@
* Anton Zinoviev
- active_partition/resize/choices: do not show "Size: ..." for
- partitions we can not resize
+ partitions we cannot resize
- active_partition/resize/do_option: tell the user if the resize
operation is impossible
- active_partition/resize/do_option: disable_swap before resize
Index: packages/base-installer/debian/changelog
===================================================================
--- packages/base-installer/debian/changelog (Revision 26549)
+++ packages/base-installer/debian/changelog (Arbeitskopie)
@@ -1443,7 +1443,7 @@
postinst, to make it easier to select which kernel to install.
* Ben Collins
- Add link_in_boot=yes prior to sparc kernel install. Allows sparc to
- transparently support /boot being on a seperate partition.
+ transparently support /boot being on a separate partition.
* Thorsten Sauter:
- kernel-installer depends now on created-fstab
Index: packages/autopartkit/configure.ac
===================================================================
--- packages/autopartkit/configure.ac (Revision 26549)
+++ packages/autopartkit/configure.ac (Arbeitskopie)
@@ -9,7 +9,7 @@
AC_PROG_INSTALL
if test "$GCC" = yes; then
- # Can not use -ansi, need 'long long'
+ # Cannot use -ansi, need 'long long'
# -ansi \
for flag in \
-pedantic \
Index: packages/udpkg/configure
===================================================================
--- packages/udpkg/configure (Revision 26549)
+++ packages/udpkg/configure (Arbeitskopie)
@@ -481,9 +481,9 @@
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
- { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+ { echo "configure: error: cannot find sources in $ac_confdir or .." 1>&2; exit 1; }
else
- { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+ { echo "configure: error: cannot find sources in $srcdir" 1>&2; exit 1; }
fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
@@ -547,7 +547,7 @@
fi
done
if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in . $srcdir/." 1>&2; exit 1; }
+ { echo "configure: error: cannot find install-sh or install.sh in . $srcdir/." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
Reply to: