[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#301282: Package: installation-reports

Package: installation-reports


Debian-installer-version: 24 Mar 2005, RC3, 
uname -a: Linux capital 2.6.8-2-386 #1 Mon Jan 24 03:01:58 EST 2005 i686 
Date: 24 Mar 2005, 4:00 pm CST
Method: Installed from netinst cd image using the boot option linux26 from  
mirrors.kernel.org, not proxied
Machine: Dell PowerEdge 400SC
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz (Hyper-threading)
Memory: 512 MB
Root Device: IDE, /dev/hda
Root Size/partition table:

Disk /dev/hda: 40.0 GB, 40000000000 bytes
255 heads, 63 sectors/track, 4863 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks   Id  System
   /dev/hda1            4742        4863      979965   82  Linux swap
   /dev/hda2   *           1        4741    38082051   83  Linux

Partition table entries are not in disk order

/dev/hda2 on / type reiserfs (rw,notail)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)

Output of lspci and lspci -n:

0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
0000:00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 
(rev 02)
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 
(rev 02)
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 
(rev 02)
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 
(rev 02)
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI 
Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 
0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 
Storage Controller (rev 02)
0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage 
Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 
0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) 
AC'97 Audio Controller (rev 02)
0000:02:00.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:02:0c.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet 
Controller (rev 02)

lspci -n:
0000:00:00.0 0600: 8086:2578 (rev 02)
0000:00:01.0 0604: 8086:2579 (rev 02)
0000:00:1d.0 0c03: 8086:24d2 (rev 02)
0000:00:1d.1 0c03: 8086:24d4 (rev 02)
0000:00:1d.2 0c03: 8086:24d7 (rev 02)
0000:00:1d.3 0c03: 8086:24de (rev 02)
0000:00:1d.7 0c03: 8086:24dd (rev 02)
0000:00:1e.0 0604: 8086:244e (rev c2)
0000:00:1f.0 0601: 8086:24d0 (rev 02)
0000:00:1f.1 0101: 8086:24db (rev 02)
0000:00:1f.2 0101: 8086:24d1 (rev 02)
0000:00:1f.3 0c05: 8086:24d3 (rev 02)
0000:00:1f.5 0401: 8086:24d5 (rev 02)
0000:02:00.0 0300: 1002:4752 (rev 27)
0000:02:0c.0 0200: 8086:100e (rev 02)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Everything looked very good for this machine, I was pleased that I could 
easily get the 2.6 kernel and reiserfs. Only two things that I think could 
use improvement:

1. The mail setup is a bit off putting I think there were five options, and 
I'm not certain I picked the proper one. Perhaps either more help would be 
nice.  (Maybe I should just spend more time reading the manual first.)
2. Would it be possible to offer the user the choice of branches.  For example 
I could select Stable, Testing, or Unstable.

Thank you for the great job, all my hardware was recognized, and I have a 
working system after about fifteen minutes. (I did a minimal installation.)

Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to submit@bugs.debian.org.

Reply to: