Bug#281682: installation report
Package: installation-reports
version: sarge
Debian-installer-version:
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20041114/
uname -a: Linux debian 2.6.8-1-386 #1 Thu Oct 7 02:21:16 EDT 2004 i586
GNU/Linux
Date: Mo Nov 15 11:35:53 CET 2004
Method: I installed debian from the netinstall-cd without a proxy
Machine: ???
Processor:
Detected 501.194 MHz processor
CPU: After generic identify, caps: 008021bf 808029bf 00000000 00000000
CPU: After vendor identify, caps: 008021bf 808029bf 00000000 00000000
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After all inits, caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c
Memory:
317068k/327616k available (1329k kernel code, 9812k reserved, 723k data,
204k init, 0k highmem)
Root Device: /dev/hda1
Root Size/partition table: fdisk -l
Disk /dev/hda: 60.0 GB, 60022480896 bytes
255 heads, 63 sectors/track, 7297 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 23 184716 83 Linux
/root
/dev/hda4 24 7297 58428405 5 Extended
/dev/hda5 470 7297 54845878+ 83 Linux /data
/dev/hda6 24 197 1397592 83 Linux
/usr
/dev/hda7 198 269 578308+ 83 Linux /var
/dev/hda8 270 295 208813+ 82 Linux swap
/dev/hda9 296 308 104391 83 Linux
/tmp
/dev/hda10 309 469 1293201 83 Linux /home
Output of lspci:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3]
(rev 04)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile
South] (rev 22)
0000:00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 11)
0000:00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power
Management (rev 30)
0000:00:08.0 USB Controller: NEC Corporation USB (rev 41)
0000:00:08.1 USB Controller: NEC Corporation USB (rev 41)
0000:00:08.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
0000:00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX
[Cyclone] (rev 30)
0000:00:0b.0 SCSI storage controller: Adaptec AIC-7861 (rev 03)
0000:01:00.0 VGA compatible controller: S3 Inc. 86c368 [Trio 3D/2X] (rev 02)
lspci -n:
0000:00:00.0 0600: 1106:0598 (rev 04)
0000:00:01.0 0604: 1106:8598
0000:00:07.0 0601: 1106:0596 (rev 22)
0000:00:07.1 0101: 1106:0571 (rev 10)
0000:00:07.2 0c03: 1106:3038 (rev 11)
0000:00:07.3 0600: 1106:3050 (rev 30)
0000:00:08.0 0c03: 1033:0035 (rev 41)
0000:00:08.1 0c03: 1033:0035 (rev 41)
0000:00:08.2 0c03: 1033:00e0 (rev 02)
0000:00:09.0 0200: 10b7:9055 (rev 30)
0000:00:0b.0 0100: 9004:6178 (rev 03)
0000:01:00.0 0300: 5333:8a13 (rev 02)
Base System Installation Checklist:
Initial boot worked: [ok ]
Configure network HW: [ok]
Config network: [ok ]
Detect CD: [ok ]
Load installer modules: [ok ]
Detect hard drives: [ok ]
Partition hard drives: [ok ]
Create file systems: [ok ]
Mount partitions: [ok ]
Install base system: [ok ]
Install boot loader: [ok ]
Reboot: [ok ]
Comments/Problems: I used only apt for installing packages and I had no
problems with the installation of sarge. The translations of the d-i
into german are ok. I could not find any mistakes or problems.
Reply to: