Re: Sheevaplug eSata hangs after setting Mainlinelinux + arcNumber
Hi!
Am 04.02.2011 20:32, schrieb Jos van Roosmalen:
> What are the factory settings for
> eSata for arcNumber and mainlineUnix (yeah stupid, I didn't make a
> printenv before starting)?
I think I have the same Sheevaplug as you do (it's this one:
<http://newit.co.uk/shop/proddetail.php?prod=eSataSheevaPlug>).
Up to now, I have pretty much left it at its default settings, so this
might help you:
>>>>>>
Marvell>> printenv
baudrate=115200
loads_echo=0
ipaddr=10.4.50.165
serverip=10.4.50.5
rootpath=/mnt/ARM_FS/
netmask=255.255.255.0
console=console=ttyS0,115200
mtdparts=nand_mtd:0xc0000@0(uboot)ro,0x1ff00000@0x1
00000(root)
CASset=min
MALLOC_len=1
ethprime=egiga0
bootargs_root=root=/dev/nfs rw
bootargs_end=:::DB88FXX81:eth0:none
image_name=uImage
standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console)
root=/dev/m
tdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig);
bootm
0x20
00000;
ethmtu=1500
mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs
mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
usb0Mode=host
yuk_ethaddr=00:00:00:EE:51:81
nandEcc=1bit
netretry=no
rcvrip=169.254.100.100
loadaddr=0x02000000
autoload=no
ethact=egiga0
eth=10.4.50.4
ethaddr=F0:AD:4E:00:41:0C
run_diag=no
bootargs=console=ttyS0,115200
mtdparts=nand_mtd:0x400000@0x100000(uImage),0x1fb0
0000@0x500000(rootfs) rw root=/dev/mtdblock1 rw
ip=10.4.50.4:10.4.50.5:10.4.50.5
:255.255.255.0:DB88FXX81:eth0:none
bootcmd=nand read.e 0x800000 0x100000 0x400000; bootm 0x800000
stdin=serial
stdout=serial
stderr=serial
mainlineLinux=no
enaMonExt=no
enaCpuStream=no
enaWrAllo=no
pexMode=RC
disL2Cache=no
setL2CacheWT=yes
disL2Prefetch=yes
enaICPref=yes
enaDCPref=yes
sata_dma_mode=yes
netbsd_en=no
vxworks_en=no
bootdelay=3
disaMvPnp=no
enaAutoRecovery=yes
Environment size: 1344/131068 bytes
<<<<<<
I would be very interested in your progress with installing Debian onto
it, since I am planning to do likewise (once I have a bit of free time
to work on it). I am particularly curious as to whether an update to
uBoot is actually necessary.
HTH, Sven
Reply to: