[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

[2nd try] unassigned-hostname on Lanner EM7210 (Thermaltake Muse NAS-RAID N0001LN)



Hi all,
Debian Installer starts just fine and the process (non-expert mode) seems to run smoothly until reboot. At that point the system is not rechable any longer, no DHCP, and the only way to access it is via the serial cable.

Login works fine (users are present in the system) but other things, i/f configuration for instance, is not working.
Below what I'm being prompted with at login:
Debian GNU/Linux 6.0 unassigned-hostname ttyS0

unassigned-hostname login: <suppressed text>
Password:
Linux unassigned-hostname 2.6.32-5-iop32x #1 Tue Mar 8 01:49:50 UTC 2011 armv5tel

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.

Please find attached the full boot log.

Is this correct or (am I remembering it correctly?) should I have been prompted with a post-installation script to finish up the system's configuration?
I've noticed a similar bug exists (#610526) but it's marked as "moreinfo, unreproducible". Which additional info can I provide? The problem is reproducible at will :)

In case of no answers I'll proceed by opening a new bug.

Thanks,
mw
+Ethernet eth0: MAC address 00:40:d0:8a:1f:99
IP: 192.168.1.11/255.255.255.0, Gateway: 192.168.1.1
Default server: 192.168.1.122, DNS server IP: 0.0.0.0

RedBoot(tm) bootstrap and debug environment [ROM]
Intel IOP RedBoot release
         version 2.2.V6-IOP-RedBoot
         built 13:51:51, Jan 12 2006

Platform: EP80219 (XScale) 
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.

RAM: 0x00000000-0x20000000, 0x00021790-0x1ffd1000 available
FLASH: 0xf0000000 - 0xf0800000, 64 blocks of 0x00020000 bytes each.
== Executing boot script in 2.000 seconds - enter ^C to abort
RedBoot> fis load ramdisk.gz
RedBoot> fis load zImage
RedBoot> exec -c "console=ttyS0,115200n8 DEBIAN_FRONTEND=text rw root=/dev/ram mem=512M@0xa0000000" -r 0x01800000
Using base address 0x01008000 and length 0x00200000
The boot tags are located at 0xA0000100
Booting the kernel...
Uncompressing Linux... done, booting the kernel.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-iop32x (Debian 2.6.32-31) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Tue Mar 8 01:49:50 UTC 2011
[    0.000000] CPU: XScale-80219 [69052e20] revision 0 (ARMv5TE), cr=0000397f
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Lanner EM7210
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200n8 DEBIAN_FRONTEND=text rw root=/dev/ram mem=512M@0xa0000000
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 512MB = 512MB total
[    0.000000] Memory: 511744KB available (3084K code, 444K data, 112K init, 0K highmem)
[    0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:32
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Calibrating delay loop... 398.95 BogoMIPS (lpj=1994752)
[    0.210000] Security Framework initialized
[    0.210000] SELinux:  Disabled at boot.
[    0.210000] Mount-cache hash table entries: 512
[    0.210000] Initializing cgroup subsys ns
[    0.210000] Initializing cgroup subsys cpuacct
[    0.210000] Initializing cgroup subsys devices
[    0.210000] Initializing cgroup subsys freezer
[    0.210000] Initializing cgroup subsys net_cls
[    0.210000] CPU: Testing write buffer coherency: ok
[    0.210000] devtmpfs: initialized
[    0.210000] regulator: core version 0.5
[    0.210000] NET: Registered protocol family 16
[    0.220000] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.220000] pci 0000:00:01.0: PME# disabled
[    0.220000] PCI: bus0: Fast back to back transfers disabled
[    0.220000] bio: create slab <bio-0> at 0
[    0.220000] vgaarb: loaded
[    0.240000] NET: Registered protocol family 2
[    0.240000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.240000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.240000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.240000] TCP: Hash tables configured (established 16384 bind 16384)
[    0.240000] TCP reno registered
[    0.240000] NET: Registered protocol family 1
[    0.240000] Unpacking initramfs...
[    1.000000] Freeing initrd memory: 4096K
[    1.000000] NetWinder Floating Point Emulator V0.97 (double precision)
[    1.000000] audit: initializing netlink socket (disabled)
[    1.000000] type=2000 audit(1.000:1): initialized
[    1.020000] VFS: Disk quotas dquot_6.5.2
[    1.020000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.020000] msgmni has been set to 1007
[    1.020000] alg: No test for stdrng (krng)
[    1.020000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.020000] io scheduler noop registered
[    1.020000] io scheduler anticipatory registered
[    1.020000] io scheduler deadline registered
[    1.020000] io scheduler cfq registered (default)
[    1.040000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.040000] serial8250.0: ttyS0 at MMIO 0xfe800000 (irq = 28) is a 16550A
[    1.360000] console [ttyS0] enabled
[    1.360000] physmap platform flash device: 02000000 at f0000000
[    1.360000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
[    1.380000]  Intel/Sharp Extended Query Table at 0x0031
[    1.380000]  Intel/Sharp Extended Query Table at 0x0031
[    1.380000] Using buffer write method
[    1.390000] cfi_cmdset_0001: Erase suspend on write enabled
[    1.390000] Searching for RedBoot partition table in physmap-flash.0 at offset 0x7e0000
[    1.710000] 6 RedBoot partitions found on MTD device physmap-flash.0
[    1.730000] Creating 6 MTD partitions on "physmap-flash.0":
[    1.730000] 0x000000000000-0x000000040000 : "RedBoot"
[    1.730000] 0x000000040000-0x000000240000 : "zImage"
[    1.750000] 0x000000240000-0x000000640000 : "ramdisk.gz"
[    1.750000] 0x0000007a0000-0x0000007c0000 : "vendor"
[    1.750000] 0x0000007c0000-0x0000007c1000 : "RedBoot config"
[    1.770000] mtd: partition "RedBoot config" doesn't end on an erase block -- force read-only
[    1.770000] 0x0000007e0000-0x000000800000 : "FIS directory"
[    1.780000] mice: PS/2 mouse device common for all mice
[    1.780000] i2c /dev entries driver
[    1.790000] rtc-rs5c372 0-0032: can't read registers
[    1.790000] rtc-rs5c372: probe of 0-0032 failed with error -5
[    1.820000] iop-adma iop-adma.0: Intel(R) IOP: ( cpy intr )
[    1.840000] iop-adma iop-adma.1: Intel(R) IOP: ( cpy intr )
[    1.840000] TCP cubic registered
[    1.850000] NET: Registered protocol family 17
[    1.850000] XScale DSP coprocessor detected.
[    1.860000] registered taskstats version 1
[    1.860000] /build/buildd-linux-2.6_2.6.32-31-armel-ReZWr3/linux-2.6-2.6.32/debian/build/source_armel_none/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.880000] Initalizing network drop monitor service
[    1.880000] Freeing init memory: 112K
Loading, please wait...
[    2.180000] udev[39]: starting version 164
[    3.170000] SCSI subsystem initialized
[    3.530000] scsi0 : sata_vsc
[    3.540000] scsi1 : sata_vsc
[    3.540000] scsi2 : sata_vsc
[    3.550000] scsi3 : sata_vsc
[    3.550000] ata1: SATA max UDMA/133 mmio m4096@0x80060000 port 0x80060200 irq 29
[    3.570000] ata2: SATA max UDMA/133 mmio m4096@0x80060000 port 0x80060400 irq 29
[    3.580000] ata3: SATA max UDMA/133 mmio m4096@0x80060000 port 0x80060600 irq 29
[    3.580000] ata4: SATA max UDMA/133 mmio m4096@0x80060000 port 0x80060800 irq 29
[    3.940000] ata1: SATA link down (SStatus 0 SControl 300)
[    4.290000] ata2: SATA link down (SStatus 0 SControl 300)
[    4.640000] ata3: SATA link down (SStatus 0 SControl 300)
[    4.990000] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.050000] ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[    5.050000] ata4.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32)
[    5.130000] ata4.00: configured for UDMA/133
[    5.140000] scsi 3:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
[    5.280000] sd 3:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    5.290000] sd 3:0:0:0: [sda] Write Protect is off
[    5.300000] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.310000]  sda: sda1 sda2 sda3 sda4
[    5.350000] sd 3:0:0:0: [sda] Attached SCSI disk
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
[    6.450000] kjournald starting.  Commit interval 5 seconds
[    6.450000] EXT3 FS on sda1, internal journal
[    6.460000] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
Using makefile-style concurrent boot in runlevel S.
Starting the hotplug events dispatcher: udevd[    8.110000] udev[143]: starting version 164
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[    9.340000] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[    9.350000] Copyright (c) 1999-2006 Intel Corporation.
[    9.680000] e1000: 0000:00:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:40:d0:8a:1f:99
[   10.040000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
done.
Activating swap...[   11.000000] Adding 1952760k swap on /dev/sda2.  Priority:-1 extents:1 across:1952760k 
done.
Checking root file system...fsck from util-linux-ng 2.17.2
e2fsck 1.41.12 (17-May-2010)
/dev/sda1: clean, 20396/152608 files, 111115/610048 blocks
done.
[   11.610000] EXT3 FS on sda1, internal journal
[   12.150000] loop: module loaded
Loading kernel modules...done.
Cleaning up ifupdown....
Setting up networking....
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux-ng 2.17.2
e2fsck 1.41.12 (17-May-2010)
/dev/sda4: clean, 11/19177472 files, 1252481/76677888 blocks
e2fsck 1.41.12 (17-May-2010)
/dev/sda3: clean, 1489/91584 files, 40037/366336 blocks
done.
Mounting local filesystems...[   15.120000] kjournald starting.  Commit interval 5 seconds
[   15.130000] EXT3 FS on sda4, internal journal
[   15.130000] EXT3-fs: mounted filesystem with ordered data mode.
[   15.190000] kjournald starting.  Commit interval 5 seconds
[   15.210000] EXT3 FS on sda3, internal journal
[   15.210000] EXT3-fs: mounted filesystem with ordered data mode.
done.
Activating swapfile swap...done.
Cleaning up temporary files....
Setting kernel variables ...done.
Configuring network interfaces...done.
Starting portmap daemon....
Starting NFS common utilities: statd.
Cleaning up temporary files....
INIT: Entering runlevel: 2
[   17.700000] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
Using makefile-style concurrent boot in runlevel 2.
Starting portmap daemon...Already running..
Starting NFS common utilities: statd.
Starting enhanced syslogd: rsyslogd.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: cron.
[   21.940000] NET: Registered protocol family 10
Starting OpenBSD Secure Shell server: sshd.
Starting MTA: exim4.

Debian GNU/Linux 6.0 unassigned-hostname ttyS0

unassigned-hostname login: <suppressed text>
Password: 
Linux unassigned-hostname 2.6.32-5-iop32x #1 Tue Mar 8 01:49:50 UTC 2011 armv5tel

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.

Reply to: